34 high rise residential elevator size, what requirements should be met

Generally speaking, the higher the landing station, the more people take the elevator, the larger the load of the elevator, but the general passenger elevator load is about 800kg or 1000kg. Therefore, the elevator of the 34-floor station generally chooses a 1000kg load. However, because some elevator manufacturers may set the standard configuration of 1050kg, if you want to choose a 1000kg load elevator, it is a non-standard configuration, which may be correspondingly higher, so it is best to ask the corresponding manufacturers when you book the elevator and choose their standard configuration, so that it is more reasonable.

800kg, the shaft is 1900x2000, the car is arranged according to the stretcher ladder, the shaft is 2000x2500, the car is 1100x2100.

An elevator is a type of vertical lift powered by an electric motor, also known as a vertical elevator (English: elevator lift), commonly known as the transliteration of "lift" in Malaysia, Singapore and Hong Kong. Vertical elevators are equipped with box-shaped pods that are used to carry people or goods in multi-storey buildings.

The elevator also has a stepped type, and the tread board is installed on the track to run continuously, commonly known as automatic elevator, also known as electric escalator (English: escalator), pedestrian elevator, escalator, etc. An elevator is a fixed lifting device that serves a specified floor, running between at least two rows of rigid guide rails that are vertical or have an inclination angle of less than 15°.

The size and structure of the elevator with a car are convenient for passengers to enter and exit or load and unload goods.

Now the current norm is that high-rise residential buildings are to be equipped with stretcher ladders.

800kg, the hoistway is 1900x2000, the car is 1400x1350.

The 1000kg is arranged according to the stretcher ladder, the hoistway is 2000x2500, and the car is 1100x2100.

The 34th floor can be used with a load of 1150. The size of the car mainly depends on the size of the hoistway, and the same load, different brands of elevators, the car size is also different.

The size of the elevator space is related to the load capacity, and the standard size is 2100*2200. For example, 1 ton load is squared, and the height cannot be less than meters. The size of the residential elevator for the home is much heavier than that of the villa, because the floor is higher and carries more people, which is generally calculated according to 1,000 kilograms.

Some residential elevators are used to carry furniture, such as sofas and other large objects.

The net size of the door opening of the 1150kg elevator is 1000*2100;

The net size of the door opening of the 1000kg elevator is 900*2100;

The net size of the door opening of the 800kg elevator is 800*2100;

The net size of the door opening of the 630kg elevator is 800*2100;

Generally, the minimum entry size of the elevator is 1430mm wide and 1250mm deep, and the horizontal dimensions of the elevator shaft are applicable. The allowable deviation value of the minimum net space size determined by the rock hammer, that is, when the height is less than or equal to 30m, the shaft is 0 25mm, and when the height is greater than 30m and less than 60m

0／＋35mm。

National Standard Elevator Door Size:

The net size of the door opening of the kg elevator is 1000 2100mm.

The net size of the door opening of the kg elevator is 900 2100mm.

The net size of the door opening of the kg elevator is 800 2100mm.

The net size of the door opening of the kg elevator is 800 2100mm.

The net size of the door opening of the 1150kg elevator is 1000*21001000kg, the net door opening size of the elevator is 900*2100800kg, the net size of the elevator is 800*2100630kg, the net size of the elevator is 800*21001, the floor door should be a door without holes, and the net height shall not be less than 2m. After the door is closed, the gap between the door leaf and the door leaf and the column, lintel and sill should be as small as possible, the passenger elevator should be 1-6mm, and the freight elevator should be 1-8mm.

2 In order to avoid the risk of shearing during operation, there should be no recessed or protruding parts on the outer surface of the automatic landing door with a search number greater than 3mm. (Except for the triangular unlock). The edges of these recessed or convex parts should be chamfered in both directions.

3 The landing door with the door lock should have a certain mechanical strength. In the opening direction of the horizontal sliding door, when the manpower of 150N (without tools) is applied to the most unfavorable point, the gap between the door leaf and between the door leaf and the column and the lintel shall not be greater than 30mm. The excess of the net inlet width of the landing door than the net inlet width of the car on either side should not be greater than.

Residential elevator size for home use: the standard is 2100x2200, the minimum is 2000x2000

1. The size of the residential elevator is much heavier than that of the villa, because the floor is high and the load is more crowded, so it is generally calculated according to the load capacity of 1000 kg. Generally, residential elevators are used to carry furniture, such as Simmons, sofas and other large items.

2. Therefore, the standard of its shaft size is 2100x2200, and the minimum is 2000x2000, which is not much different. Home elevators are mandatory in some provinces, such as more than 12 floors, then it is necessary to install 2 elevators, while the car of an elevator can not be less than 1600 mm, the car and load capacity directly affect the size of the hoistway, so if the load capacity increases, the car will increase, then the size of the hoistway will change from the largest to the largest, which can be freely designed.

Enter the area and get the decoration for free**].

Elevators are very common in life, generally as long as the building is more than 7 floors, elevators need to be installed, so as not to affect daily life, life comfort will be better, usually the elevator size of high-rise buildings is very large, and will be configured with several elevators, in order to meet the needs of use, and the frequency of use of elevators in small high-rise buildings is not so high, the size of the elevator is naturally smaller, so what is the size of the small high-rise elevator? Let's take a look.

1. What is the size of a small high-rise elevator?

1. The load is 320kg, the shaft is 1400*1600mm, and the car is 900*1000*2200mm, which can be used for 4 people; 2. The load is 400kg, the shaft is 1600*1600*1800mm, and the car is 1000*1100*2200mm, which can be used for 5 people; 3, the load of 630kg, the shaft is 1600 * 1800 * 1900mm, the car is 1100 * 1400 * 2200mm; Seats 8 people; 4. The load is 1000kg, the shaft is 1800*1600*2600mm, and the car is 1100*2100*2200mm, which can be used for 13 people.

Second, what is the purpose of the elevator?

1. Passenger use.

The more common elevators in life are used to transport passengers, generally used in small high-rise buildings, high-rise buildings, office buildings, restaurants, villas and other places, not only beautiful, but also safe and comfortable.

2. Cargo use.

The elevator designed to transport goods is called a freight elevator, which is generally used in factories, shops, warehouses and other places, and its structure is required to be firm, safe and safe, and the speed is generally controlled within 1m s.

3. Dual-use for passengers and goods.

Elevators that can be used to transport passengers and goods are more common in hotels, restaurants, hotels and other places, also known as service elevators, and the interior decoration and structure of the car will be relatively different.

4. Residential use.

The elevator specially designed for the use of residential buildings, using the sub-set control method, can also be called Zhaoye special elevator, which can be used by wheelchairs, strollers, furniture, etc. for the disabled.

The above is an introduction to the size of the small high-rise elevator, the size of the small high-rise elevator is not fixed, mainly designed according to the load and combustion, the load increases, the size of the car will increase, and the size of the shaft will naturally need to become larger, I hope that the content shared can give you some reference, if you want to know more about related knowledge, you can **** Qijia information.

Do the math how much it will cost you to renovate your home

High-rise buildings have requirements for the size of fire elevators. The Code for Fire Protection Design of Buildings and the Code for Fire Protection Design of High-rise Civil Buildings clearly stipulate the scope of fire elevators.

The fire elevator has a front room. The area of the front room of the independent fire elevator is: the front room area of the residential building is greater than square meters; The area of the front room of public buildings and high-rise factory (warehouse) buildings is more than 6 square meters.

When the front room of the fire elevator is shared with the smoke-proof stairwell, the area is: the area of the front room of the residential building is more than 6 square meters, and the area of the front room of the public building and the high-rise factory (warehouse) building is more than 10 square meters.

An elevator is a vertical lift powered by an electric motor with box-like pods that are used in multi-storey buildings to carry people or goods. There is also a stepped type, and the tread plate is mounted on the track for continuous operation, commonly known as escalator or moving walk. Stationary lifting equipment serving the specified floors.

A vertical lift has a car that runs between at least two rows of rigid rails that are vertical or have an inclination angle of less than 15°. The size and structure of the car are convenient for passengers to enter and exit or load and unload goods. It is customary to use elevators as a general term for vertical transportation within a building, regardless of the mode of drive.

According to the speed, it can be divided into low-speed elevators (less than 4 meters second), fast elevators 4 12 meters second) and high-speed elevators (more than 12 meters seconds). Hydraulic elevators began to appear in the mid-19th century, and they are still used on low-rise buildings today. In 1852, Otis of the United States developed a safety elevator for wire rope lifting.

In the 80s, the drive device was further improved, such as the electric motor driving the winding drum through worm drive, the use of counterweight, etc. At the end of the 19th century, friction wheel transmission was adopted, which greatly increased the lifting height of the elevator.

I guess you're talking about the load of the elevator. The load of the high-rise elevator is determined according to your needs (**amount), and the number of people who use it needs to consider using an elevator with a large load capacity, which is enough, otherwise it is a waste.

For high-rise residential buildings with 12 floors or more, each building shall be equipped with no less than two elevators, which is based on: Article 1 of the Code for Fire Protection Design of High-rise Civil Buildings stipulates that fire elevators shall be provided in tower houses, unit houses with 12 floors and above and corridors. Article 1 stipulates that fire elevators can be used in conjunction with passenger elevators.

According to the latest code, a stretcher elevator is mandatory for high-rise residential buildings with 12 storeys or more.

There are no hard and fast requirements. For the sake of emergencies, the elevator should fit a stretcher.