How to adjust the smoke helmet in win7 system?

Hello landlord: Tune outside before entering the game! First right-click on the surface (Properties), then click (Settings), then click (Advanced), then click (Geforce

GTS250) and then tap (Launch.

nvidia

nvidia

Set), then two-degree tone (55 percent), contrast tone (85 percent), hue (55 percent), click (Apply), turn it off, click OK, click Yes, then adjust the color quality to (medium (16 bits), click OK. In this way, except for the red smoke, it is better to see people through the smoke when there is a black smoke.

XP system: Desktop - right-click - select "Properties" - select "Settings" - 800*600 pixels - select "Color Quality" - select 16 median colors - Advanced - select "Monitor" - adjust "Hz" to 75.

Turn down the picture quality!

Enter the game, press F1, adjust the brightness to 75, OK.

In this way, the white smoke is basically ineffective, and the red and green smoke are half-visible.

Win7 system:

Step 1: Right-click on the desktop screen resolution - Advanced settings - monitor - color 16-bit.

Shade 11 ——

Saturation 35, after which the point is applied to the game with a brightness of 65 or more.

1. Open the Control Panel.

2. Open the NVIDIA Control Panel.

3. Open [Adjust Desktop Color Settings], and set it as a reference in the following figure.

<>5. After the setting is completed, open CF, enter the game - game settings - worry-free settings - automatic settings - pull the triangle to the right, color depth - low - map quality - 16 - weather effect - none - picture brightness 65-80 - other bullet marks can be set at will.

Recently, a lot of friends have reported to us that win7 professional version of how to adjust the smoke head when playing cf,Because after adjusting the smoke head,You can see the enemy's position more clearly and seize the opportunity,Then the little troublesome partner who can't operate will go down together to see the ** tutorial with liquid concealment。

The specific steps are as follows:

1. In the blank space of the desktop of the computer, right-click the mouse, and select the "screen resolution" in the pop-up list.

2. In the pop-up "Screen Resolution" page, click Advanced Settings in the lower right corner, and then select "Monitor" in the pop-up new page.

3. Change "True Color (32-bit)" to "Enhanced Color (16-bit)" in the color options, and click Apply. Note that after clicking on the app, the color of all the borders will change and become opaque, but don't worry, just click OK again.

4. Go back to the "Screen Resolution" page and click OK as well.

5. Now, you can log in to Crossfire, click on the game settings, and the settings are shown in the figure below, the brightness does not need to be adjusted too brightly, the effect will be poor, and the brightness can be adjusted to about 50.

No matter how good your smoke head is, the red smoke can't be seen clearly.

Adjust the smoke head --- desktop -- properties -- settings -- 32 tones to 16 colors on it.