Dear friends, thank you in advance. Knowledge about fire engineering

It is impossible for anyone to memorize all the knowledge points, so it is necessary to recognize the priority and prioritize memorizing the key knowledge points. We take the exam to pass and get the certificate. Just memorize the key points, and give up if it's too biased and too difficult.

Memorization requires a certain method. It is recommended that you take a look at Gang Leader Chen's strongest brain memory method. It's easy to memorize and get points.

A combination of problem solving and revision.

Guangjian Talent Network suggests that you can review while doing questions, which can systematize the knowledge points that have been reviewed before, and at the same time, combined with the practice of test questions, will make the knowledge points you have reviewed more organized, and you can also remember and remember more clearly.

Write and answer the questions. In order to facilitate the convenience of many candidates, many candidates choose to use their mobile phones to do questions, eliminating the link of hands-on questions, and even directly looking at the questions and answers of the tutorial materials for memorization, which not only ignores the importance of using the brain, but also can strengthen the memory. It is recommended that you do some paper test papers appropriately, and then go to the correct answers after completing a complete set of test questions. Be sure to strictly control the time of the exam to do the questions.

It is necessary to have the process of thinking for oneself and demonstrate whether one's own ideas for solving the problem are correct, such as calculation and analysis questions and comprehensive questions, there is more than one step to answer the question, and there is no way to calculate correctly just by imagining in the brain, so in the process of doing the question, you must write your own ideas diligently, so that the impression can be deep.

Have a notebook.

Mistakes are more reflective of how well you usually review. You can see where you are lacking in learning by making mistakes. If the reason for the mistake is because the knowledge points are not clear, it is recommended that you can learn the foundation more solidly, if it is a lack of answering skills, it is recommended that you can learn the foundation a little more solid, if it is a lack of answering skills, you can learn from the answering skills of others.

It is recommended that candidates do at least 3 years of real questions in the first-class fire engineer exam before the start of the exam, make good use of the real questions, and be familiar with the knowledge points and ways of asking questions.

I'm not just learning! Don't listen to these agencies! It's just a memorization over and over again, and there are no shortcuts.

Sometimes my back feels like it's going to die! Sometimes doubt life! Sometimes I want to pick up a knife and hack the person who asked the question to death!

I don't understand the point of such a complete test of memory. I don't even want to take the test, I can live anyway, I'd rather go to work and not study! It feels like it's been hovering before giving up and trying!

Here's an easy way for you. I can't remember how to go around with dizziness on my back. Turn back and continue to memorize.

There's nothing you can do about it! And with a good mentality, it's impossible to remember everything, and it's not a god. There's always something I can't remember.

Just pass! It's impossible to remember it all! Anyway, it's just a passing grade.

I'm tired and sleeping, I'm probably not going to be able to do it anyway. Carrying it on your back is like a computer reboot and falling asleep. Just wake up and continue.

You can choose online courses to learn, vocational training education network has rich training experience, many talented teachers teach, I believe it will help you learn successfully, get the certificate as soon as possible! Fire Engineer Course Tutoring.

The 2018 fire engineer examination is not limited to majors, any major can apply for the examination if the conditions are met, and obtain the corresponding fire engineer qualification certificate issued by the state, and the professional and technical personnel who can be engaged in fire protection facility testing, fire safety testing and other fire safety technology work with this certificate.

Why are so many people rushing to apply for the fire engineer exam? What are the advantages of a fire engineer?

1.Talent is in huge demand.

According to the Ministry of Public Security Fire Bureau, in the next 3 to 5 years, China needs nearly 500,000 registered fire engineers, a wide range of demand, all walks of life, all important fire protection responsibilities of the unit and related intermediaries, all need to be equipped with a corresponding number of fire engineers to obtain qualifications.

2.The difficulty of the exam is decreasing year by year.

Since the first examination of a first-class registered fire engineer in 2015, the pass rate of general practice that year is only, the pass rate of general practice in 2016, and the pass rate of general practice in 2017 is 3%-5%.

3.Grade management is relatively relaxed.

The examination subjects of the first-class registered fire engineer are three subjects, and the rolling management method of a three-year cycle is implemented; The examination subjects for the second-level registered fire engineer and the first-class registered fire engineer exempted personnel are two subjects, and the rolling management method is implemented for a cycle of 2 years; This policy helps candidates to have more time to revise and can guarantee a higher pass rate.

4.There are many positions and high salaries.

Registered fire engineers can be engaged in business managers, project managers, fire protection engineers, budget officers, fire engineering project managers, water and electricity engineers, fire protection constructors, constructors, fire protection project managers, fire engineering budget officers, mechanical and electrical engineers, safety directors, safety consultants, etc.

5.The certificate is of high value.

The fire protection engineering major belongs to the public security technology category in the engineering category, of which there are 6 majors in the public security technology category, and the fire protection engineering major ranks first in the public security technology major, and ranks 44th in the entire engineering category. Among similar majors, the high ranking of the fire protection engineering major has created a high gold content of the registered fire engineer certificate.

6.Employment is good.

Fire engineer is the only one in the country that can be registered to the age of 70 access class certificate, according to the survey of the north, Shanghai, Guangzhou and other first-tier cities affiliated costs are considerable, now.

Second- and third-tier cities are also gradually understanding and implementing, and if you do a full-time job, it is a transformation in many friends' lives.

Fire Engineer, how to start reviewing and preparing for the exam,First look at the technical practice, then look at the comprehensive ability, and finally the case analysis.

Technical practice is the basic theoretical principle part of this exam, mainly the embodiment of the major norms, comprehensive ability is how to check and apply, and case analysis, is a practical comprehensive application on the basis of these two subjects, is the culmination of the first two books, is the test of our overall learning ability.

01 Read the textbook in a disciplined way.

There are a lot of knowledge points in one match, and we can't grasp them all in our minds, but we aim to win the certificate, try to lose as few points as possible, and the plenary meeting is impossible, so we have to talk about the teaching materials and sort it out, first of all, we must do a good job in the basic questions, and the foundation must be stable in order to continue to move forward.

02 The order of learning.

We all know that there are three textbooks in total, and we must first look at technical practice, then learn comprehensive ability, and finally case analysis. It only takes the first two books to be used in the case study. Finally, the knowledge points of the first-level fire engineer are relatively scattered, so we should prepare notes, summarize similar knowledge points together, and look at them at leisure.

This will also help you understand and improve your learning efficiency.

03 Comprehensible mnemonics.

The idea must be flexible, and then memorize after understanding, such as: reciting with questions, like a fire extinguisher, we can often see it in our lives, and it will be much better to learn it with examples.

The computer is for learning, if you don't need to use it for learning, you should turn it off!

Completing the exam questions is secondary, and the most important thing is to finish everything you can do first.

It's best to have a test taker around you, who usually prepares for the exam more diligently, so if you study alone and have no friends, you will be lonely and unheard.

Every day before going to bed, recall the difficulties, points, and formulas you have watched, and go through the movie in your head.

Don't give up until the day the results are announced, and don't rejoice too soon. ”

Before deciding to take the fire test, please think about whether you really decide to take the test, and if you do, you must keep taking the test until you succeed. This is very important, if you don't understand, without this determination and persistence, forget it...

First look at the technical practice, then look at the comprehensive ability, and finally the case analysis.

Technical practice is the basic theoretical principle part of this exam, mainly the embodiment of the major norms, comprehensive ability is how to check and apply, and case analysis, is a practical comprehensive application on the basis of these two subjects, is the culmination of the first two books, is the test of our overall learning ability.

There is a great god who wrote a post that you can search for, probably called the Registered Fire Engineer Exam Experience Learning Method 5000 words.

Can you add your friend for advice?

To prepare for the fire engineer exam, one is to read more, memorize more, and practice more. The landlord feels that the knowledge points are not easy to remember, so you usually do more exercises, the same knowledge points, do more exercises, and naturally remember them. It's better to see it a thousand times than to go through it with your hands, that's the truth.

Hello, glad to answer for you.

Exam Subjects. Registered fire engineers take a total of three subjects, and the results of the three subjects are valid for three years, which means that you can pass the three examinations within three years. The three exams are "Fire Safety Technical Practice", "Fire Safety Case Analysis", and "Comprehensive Ability of Fire Safety and Safety Technology".

Exam question types. The test questions for "Fire Safety Technology Practice" and "Comprehensive Ability of Fire Protection Technology" are objective questions. Multiple choice questions require you to choose the most appropriate option from the alternatives as your answer. In each question of "multiple-choice questions", there are two or more options that match the meaning of the question, and no points will be awarded for incorrect selection; Missed selection, each selected topic is scored.

In all multiple-choice questions, there are 80 multiple-choice questions, each worth 1 point; 20 multiple-choice questions, each worth 2 points.

Test scores. The 15-year question type of the "Fire Safety Case Analysis" subject exam is 6 subjective questions, and the subjective question is a comprehensive case analysis question; After 16 years, the question type is 2 multiple-choice questions + 4 subjective questions, and the subjective questions are comprehensive case analysis questions. The total marks of the three subject papers are 120 points. A minimum score of 72 (inclusive) is required for each subject.

Examination system. The examination results are subject to a three-year rolling management method, and only those who take the examination of the subjects in three consecutive examination years and pass the examination can obtain the first-class registered fire engineer certificate. On August 24, 2015, the Fire Bureau of the Ministry of Public Security issued Document No. 233 of 2015 for the examination of registered fire engineers in the middle of November in the second half of each year.

Hope it helps.

Hello, glad to answer for you.

Candidates preparing for the first-level fire engineer exam are recommended to start with the two books of "Fire Safety Technology Practice" and "Fire Safety Technology Comprehensive Ability", because the practice and comprehensive ability are relatively involved in more basic content, and the difficulty of the exam is slightly lower.

Characteristics of the three subjects.

2. Comprehensive ability: It is an extension of technical practice, which mainly explains the practical operation experience such as inspection, commissioning, and acceptance, and there will be many small skills in it.

3. Case analysis: It is all about the practical application of real knives and guns, which is more difficult, and must be learned after technical practice and comprehensive ability to learn, not only because there are cases, but after some basic understanding of fire protection, you will also feel that this subject is particularly interesting.

The fire engineer exam can start with "Fire Safety Technical Practice". There are three subjects in the fire engineer examination, which are "Fire Safety Technical Practice", "Fire Safety Case Analysis" and "Comprehensive Ability of Fire Safety Technology". The results of the three subjects are valid for three years, which means that you can pass the three exams within three years.

Characteristics of the three subjects.

1. Technical practice.

It summarizes the basic principles of fire protection and all related knowledge in this textbook, which has clear chapters and comprehensive explanations.

2. Comprehensive ability.

It is an extension of technical practice, which mainly explains the practical operation experience such as inspection, commissioning, and acceptance, and there will be many small skills in it.

3. Case analysis.

It's all about the practical application of real knives and guns, which is more difficult, and you must learn technical practice and comprehensive ability before you can learn, not only because there are cases, but you will also feel that this subject is particularly interesting after having some basic understanding of fire protection.

For the fire engineer exam, first look at "Fire Safety Technical Practice".

The order of preparation for the general fire engineer exam is "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability", and "Fire Safety Case Analysis". For candidates who are exempted from the exam, it is best to also read "Fire Safety Technical Practice", although this subject is not taken.

For the fire engineer exam, first look at "Fire Safety Technical Practice".

The subjects of the first-level fire engineer examination include "Fire Safety Technical Practice", "Comprehensive Ability of Fire Protection Technology", "Fire Safety Case Analysis", and "Fire Safety Case Analysis".

The content of the first-class fire engineer exam is relatively simple, but the test center is very extensive, basically covering the content of the entire textbook, which requires the test preparer to be very familiar with the textbook, at least read it twice, in order to be familiar with the textbook.

When reading the textbook, pay attention to taking notes on the key content, and take notes on the content that you don't quite understand or difficult to understand when reading, so that you can jump out of the textbook and review the notes directly when you review after reading the book, so as to deepen your impression and understanding.

It is necessary to formulate a review plan, and complete it in a timely manner according to the quality and quantity, do not delay and do not fool yourself, only by reviewing in a timely manner according to the plan and ensuring the quality can the effective results of the review be achieved and good results can be achieved.

To review the first-level fire engineer exam, you should carefully practice doing questions, including past real questions and mock questions, and record the questions you have made wrong in a notebook, so that you can review them repeatedly at ordinary times and when the exam is approaching, so as to deepen your impression and avoid making the same mistakes. At the same time, in the process of review, on the one hand, we should pay attention to the integration of the whole textbook and thoroughly understand the content, and on the other hand, we should develop the logical thinking of reading and reviewing the questions, and avoid multiple choices, fewer choices and missing selections.

The specific situation of each person is very different, but in order to finally pass the qualification exam, you must work hard, believe that "success comes naturally", meet the challenge with a healthy attitude, face it bravely, and find ways to overcome it.