How to fold the BYD Surui rearview mirror?

There is a switch with auto written on it near the switch to adjust the angle of the rearview mirror, you press to auto, that is, the middle position, automatically shrink after locking the car, and drive automatically!

BYD Surui Profile:BYD Surui is a compact car, in March 2014, BYD Surui was officially launched, of which ** Surui also added an engine + 6-speed DCT gearbox.

power combination.

The new models launched after the strategic transformation of the BYD brand have gradually gotten rid of imitation in terms of design, and are also very sincere in terms of configuration and service, among them, the feedback of the ultra-long warranty of "4 years or 100,000 kilometers" and the promise of "less than 1 fault on average in two years" are very impressive. As far as the model itself is concerned, the Surui equipped with remote control driving technology and TID power combination is bound to bring a new impact to family cars, of course, for independent brands, in addition to model quality, service, and marketing strategies.

More important.

BYD rearview mirror folding method: you need to fold through the rearview mirror folding button, this button is located next to the rearview mirror adjustment knob of the driver's door, as long as you press this button, the motor in the rearview mirror will automatically fold the exterior rearview mirror.

Hello The rearview mirror of Surui's flagship model has an electric folding function, and other models can only be manually pulled and folded.

There is a switch with auto written on it near the switch to adjust the angle of the rearview mirror, you press to auto, that is, the middle position, automatically shrink after locking the car, and drive automatically!

The electric folding of the rearview mirror completes the folding function through the motor in the mirror, which is operated by the button in the car, and the button position is different depending on the car. The driver only needs to operate the button to realize the electric folding of the rearview mirror, and the long-term folding will not cause damage to the rearview mirror itself.

Electric folding of the rearview mirror means that the rearview mirror on both sides of the car can be folded and retracted if necessary. This feature is especially useful when parking on the side of the road in the city, where the mirrors can be folded to save a lot of space and at the same time avoid the pain of "broken ears" in your car.

The vehicle will inevitably have some accidents in the process of driving, the rearview mirror as the widest part installed on the vehicle, in the case of causing friction, the most susceptible to impact, in order to avoid scratches to the greatest extent, it is necessary for the rearview mirror to have a folding function.

The rear-view mirror with folding function can be contracted up when passing through the narrow road section, which improves the passability of the car, and when the driver leaves the car, the rear-view mirror can also be folded up, which can not only protect the mirror, but also reduce the parking space, and effectively avoid scratching.

How to fold the rearview mirror of the 2013 BYD Surui.

Hello, this button is generally at the main driver's glass lifter switch, and some are in front of the headlight switch, I hope my answer can help you! If you don't understand, you can ask me! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Summary. The electric folding button in the rearview mirror of this car can be seen in the front position of the glass lift switch of the main driver's door. This mark on it means that there is this mark of this square, and then there is this icon of this rearview mirror on it.

If you can't find it, you can take a picture of this position** and tell you about it specifically.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

The electric folding button in the rearview mirror of this car can be seen in the front position of the glass lift switch of the main driver's door. The mark on this is to say that there is a mark on this block, and then there is a sign on it that makes the icon open like this. If you can't find it, you can take a picture of this position**, and tell you about it specifically.

What about that. You look at the case marked in **, if you can press it, you try it, if you can't press this button, you don't have this rearview mirror fold with a stupid stacking function, there is no such file to judge a button.

This aut0 isn't it.

This one is not, this one is a one-button lifting of glass.

Your car is the button that you just marked, if you can press down to open the car Zen, you try it, if the sail can't be pressed, your car does not have this function.

Good. Oooh.

The BYD Qin rearview mirror has two ways: manual folding and electric folding. When folding manually, press firmly against the outside of the mirror and rotate the mirror inward until it locks it.

When folding electrically, find the button located on the instrument panel on the left rear of the steering wheel, press it once to fold the mirror, and press the mirror again.

When passing through a narrow passage, the rearview mirror can be temporarily retracted to facilitate the smooth passage of the vehicle, and also avoid scratching the rearview mirror housing.

Basically, the rearview mirror of many family cars has a folding function, which can provide convenience for the vehicle to pass through the narrow road, orange chain, but it should be noted that the rearview mirror should be timely after passing the narrow road, before continuing to drive, it is strictly forbidden to drive the vehicle to the open road under the condition that the rearview mirror is folded.

In the process of driving, the driver can not adjust the rearview mirror, which may lead to misoperation of the vehicle and bring potential safety hazards to driving.

The correct way is to adjust the angle of the rearview mirror when getting into the car, and confirm that the rearview mirror can provide the rear picture of the car normally before driving on the road.

Millions of car purchase subsidies.

If BYD's rearview mirror folding angle is not the same, you can try the following methods to solve it:

1.Check that the folding mechanism of the rearview mirror is normal. Sometimes, the mirror folding mechanism may malfunction or loosen, resulting in different folding angles. You can check whether the mechanism is normal, and if you find a problem, it is recommended to go to the repair station for repair.

2.Adjust the folding angle of the mirrors. BYD's rearview mirrors have an electric adjustment function, and you can try adjusting the folding angle of the rearview mirror with the buttons in the car. If you find that the left and right mirrors fold at different angles, you can adjust the buttons to make them consistent.

3.Reset the mirrors. Sometimes, the folding angle of the rearview mirror may deviate due to various reasons. You can try resetting the folding angle of the rearview mirror by folding it and folding it a few times to bring it back to normal.

In short, if BYD's eye-watching pin rearview mirror folding angle is not the same, you can first check whether the folding mechanism is normal, and then try to solve the problem by adjusting the button or folding the rearview mirror. If the problem persists, it is recommended to go to the workshop for repair.

If the folding angle of the rearview mirror of your BYD model is inconsistent, it may be due to a malfunction or improper adjustment of the electric folding mechanism of the rearview mirror. Here are some possible workarounds:

1.Check the electric folding mechanism: First of all, you can check if the electric folding mechanism of the rearview mirror is working properly.

If the mechanism fails, it may need to be repaired or replaced. If you are not familiar with the repair operation, it is recommended to go to a car repair shop that specializes in the repair industry for inspection and repair.

2.Adjust the mirror: If the electric folding mechanism is normal, but the angle of the mirror folding is inconsistent, it may be due to improper adjustment of the mirror.

You can try manually adjusting the angle of the mirror so that it aligns with the mirror on the other side. If manual adjustment does not solve the problem, it is recommended to go to a professional car repair shop to adjust it.

3.Reset the mirror: Some BYD models may support the reset function in the mirror, which can be restored to the initial settings of the mirror by pressing the reset button on the mirror.

You can check the vehicle's owner's manual or consult BYD's customer service staff to learn how to use the reset function of the rearview mirror.

In short, if the folding angle of the rearview mirror of your BYD model is inconsistent, it is recommended to check and repair it as soon as possible to ensure driving safety.

BYD rearview mirror folding angle is not the same solution:

1.Check the circuit: First of all, you can check whether the circuit of the rearview mirror is normal, you can use a multimeter and other tools to check whether the circuit is unobstructed, or check whether the power cord and interface are loose or damaged.

2.Check the motor: If the circuit is normal, then you need to check whether the rearview mirror motor is damaged, you can check whether the motor is damaged or whether the wire is loose by opening the shell of the rearview mirror.

3.Adjust the angle: If the circuit and motor are normal, then you need to adjust the angle of the rearview mirror. The angle of the rearview mirror can be adjusted manually or via the on-board computer, which needs to be operated according to the method in the vehicle's instruction manual.

4.Replacement parts: If none of the above methods work, then some parts may need to be replaced, such as motors, wires, control modules, etc. If you are not sure how to repair it, it is recommended to go to a BYD authorized repair site for overhaul or replacement.

It should be noted that the rearview mirror is one of the key parts of the vehicle to drive safely, and if there is damage or failure, the vertical core should be repaired in time to avoid affecting driving safety.

If the folding angle of the BYD rearview mirror is not the same, you can try the following solutions:

1.Check that the rearview mirror is folded in the correct position. Some vehicles may have different mirror folding positions and need to be adjusted according to the actual situation.

2.Check that the mirror motor is working properly. If there is a problem with the motor, it will cause the mirror to fold at an inconsistent angle. At this time, it is recommended to go to a professional car repair shop for inspection and repair.

3.Check that the connecting screws in the rearview mirror are loose. If the attachment screws are loose, it will cause the mirrors to fold out unbalanced. At this point, you can use a wrench or screwdriver to tighten it.

In general, there may be many reasons why the folding angle of BYD's rearview mirror is different, which needs to be analyzed on a case-by-case basis. If the above solutions cannot solve the problem, it is recommended to go to a professional car repair shop for inspection and repair.

It should be noted that the rearview mirror of the vehicle is an important part of driving safety, and if there is an abnormal situation, it should be dealt with in time. At the same time, for some people who don't know much about cars, it is not recommended to carry out repairs on their own, and they should seek professional help.

Inconsistent folding angles of BYD mirrors can be caused by improper use or mechanical failure. If the inconsistency is just caused by misuse, you can try to solve it in the following ways:

1.Check that the vehicle's power supply is normal, if there is no power supply** or the voltage has been low before, this shaker may cause the angle of the mirror to be inconsistent.

2.If it's a manually folded mirror, make sure both mirrors can be moved up and down before resetting. Then adjust both mirrors to the correct height and horizontal position at the same time, and fold them into place.

3.If the mirror is power-folding, you will need to try to reset the folding method of the mirror through the vehicle's central console or the external key or key Senma remote control. Instructions on how to do this can usually be found in the vehicle manual or on the web.

If the above methods still do not solve the problem, you may need to go to BYD's professional repair shop for overhaul and repair to rule out the possibility of mechanical failure. Before the overhaul, it is best to make an appointment with the repair shop in advance, and prepare the vehicle maintenance records and warranty information so that the maintenance personnel can better understand the problem and solve the problem in time.

Answer: If the BYD rearview mirror folding angle is not the same, you can try to recalibrate the rearview mirror once.

Explanation: The different folding angles of the rearview mirrors may be caused by some impact during the use of the vehicle, or improper operation. Recalibrating the mirrors can return them to their normal folding angle, which in turn provides the driver with a better secure view.

Solution: First of all, you need to find the rearview mirror calibration button of the BYD model, which is generally located on the control panel next to the driver's door. Press the mirror calibration button, wait a few seconds, and the mirror will start to recalibrate.

If this doesn't work, you can try to repair or replace it at a professional repair shop.

Extended instructions: In order to avoid the occurrence of different folding angles of the rearview mirror, the driver should pay attention not to expose the vehicle to too harsh environment in ordinary use, and at the same time operate the rearview mirror correctly to avoid causing unnecessary or necessary damage to it. If the vehicle has not been used for a long time, it should also be paid attention to regular maintenance and maintenance to ensure the normal use of the rearview mirror and other components.

If BYD's rearview mirror folding angle is not the same, it may be due to the following reasons:

1.Mirror motor failure: Bia's mirrors are usually electrically driven, and if the motor fails and is missing, it will cause the mirror to fold at an inconsistent angle. At this time, it is necessary to go to a regular maintenance center for inspection and repair.

2.Rearview mirror adjustment lever damage: The rearview mirror adjustment lever connects the rearview mirror and the body, if the adjustment lever is damaged or the connection is loose, it will cause the rearview mirror to fold inconsistently. At this time, it is necessary to go to a regular repair center for inspection and replacement.

3.Loose mirror fixtures: Mirror fixtures connect the mirrors to the body, and if the fixtures are loose or damaged, the mirror folding angle will be inconsistent. At this time, it is necessary to go to a regular repair center for inspection and replacement.

1.Check the motor and cables for problems and replace or repair them if necessary.

2.Check the mirror adjustment lever for loose or damaged mirrors, and replace or repair them if necessary.

3.Check the mirror fixtures for loose or damaged rearview mirror fixtures and replace or repair them if necessary.

If you do not have the relevant maintenance skills and experience, it is recommended to go to a regular BYD maintenance center for inspection and maintenance to avoid damage or safety accidents caused by self-operation.