What is the geothermal cleaning method geothermal cleaning price

Floor heating cleaning is generally charged according to the pipeline, generally 80-150 yuan a circuit.

** with more pipelines is cheaper. Single two-way ** slightly expensive.

The consumption level of each city is different, and the floor heating cleaning ** is also high and low.

For details, please call us or make an appointment to clean the floor heating.

Geothermal Cleaning Method:

1. Chemical soaking: advantages - thorough cleaning, can fully dissolve the slime attached to the pipe wall, high-quality food-grade raw materials will not cause corrosion to the geothermal pipe; Deficiencies - most of them use low-cost strong acid preparations, which are easy to cause corrosion to pipelines and related components.

2. Projectile cleaning: advantage - cleaning is more thorough, using the friction between the cleaning bomb and the pipe wall to remove the slime attached to the pipe wall, without damaging the geothermal pipeline; Insufficient - the geothermal pipe needs to be disassembled, and the underground pipeline has a joint that is not suitable for construction, which is easy to make the cleaning bullet stuck in the pipeline; At the same time, it is easy to cause secondary damage to the original water separator, valve and other related parts.

3. Pulse wave physical cleaning: advantages - no need for chemicals, no disassembly of geothermal pipes, cleaning is more thorough, due to its unique cleaning principle, the main pipeline and valve of the geothermal water separator can be cleaned at the same time, so as to avoid long-term scaling and valve blockage; Deficiencies - the construction is limited by space, and some household geothermal water separators are placed in hidden places, and it is not easy to construct when the two ends of the water separators are too close to the wall.

Geothermal cleaning equipment according to different design principles, there are many models of classified machines for consumers to analyze in combination with the actual specific budget or needs, for example, air pressure pulse geothermal cleaning equipment is a relatively more widely used machine, for the intention to refer to the purchase of friends is also of great reference significance. In addition to this, there is also a description based on how it works and its classification details. So interested friends may wish to start learning according to their own situation.

1. Geothermal cleaning equipment is old

With the rapid development of the geothermal market, the use of geothermal heating is more and more extensive, according to relevant statistics, pipe fouling of 1mm, can lead to a drop in water temperature 6, so to geothermal users cause property damage and inconvenience. At the same time as geothermal heating is popular, the cleaning and maintenance of geothermal heat has also become a major problem that we must face.

Second, how much is the floor heating cleaning once

How to clean the floor heating pipes? Generally speaking, there are three kinds - chemical soaking, projectile cleaning, and pulsed wave physical cleaning. Among them, the pulse cleaning method is the most used for floor heating, which can clean the scale and impurities of the floor heating pipe and water separator at one time.

Floor heating cleaning is generally calculated by the square, according to the heating area of the geothermal heat, now it is generally 2-3 yuan a square is more reasonable.

How much is the floor heating cleaning once There is also a kind of calculation according to the circuit, a circuit is basically 50 yuan, and now most of the cleaning units are basically the cost of door-to-door cleaning is provided for reference only. For example, taking Beijing as an example, the cost of cleaning a 180-square-meter house is about 500 to 700, depending on the charging mode of the floor heating cleaning company, the cleaning institutions are different, the cleaning methods are different, and the cleaning fees charged are not the same.

3. Where to buy geothermal cleaning equipment?

There is it on Alibaba, you can go up and see, the specific price or go up to see it! The price varies depending on the model.

1. GDWS-903 Pipeline Guard Multi-function Cleaning Machine Three-in-one Floor Heating Cleaning Machine.

Market price: 2. LG-M304 Double Pulse Pipe Cleaning Machine Geothermal Cleaning Machine Water Pipe Cleaning Machine.

Market price: 3. LG-6000 pulse cleaning all-in-one machine.

Market price: There are many examples of knowledge above, including the introduction of different classification machines of geothermal cleaning equipment, as well as the content presentation of the working principle and operation steps in one step. From this, we can know that the knowledge of multiple sectors is worth referring to, and it is also extremely valuable for later purchase or operation. However, if we want to further ensure the appropriate effect or reduce the loss, what we need to do is to use the recommendations of trusted brands on the market to screen out suitable and reasonable geothermal cleaning equipment.

You can get it for free

1. Buy floor heating chemical cleaning agent in the market or a specialized floor heating cleaning company.

2. Open the water inlet pipe of the floor heating.

3. Pour the floor heating chemical cleaning agent into the water inlet pipe.

4. Confirm that the floor heating pipe is full of water, if not, continue to fill it with water, then close the water inlet valve, and start the floor heating circulating pump to work for about half an hour.

5. Open the outlet of the return valve, and discharge the cleaned sewage, the discharged water contains chemicals, and it is recommended not to discharge it casually.

6. Then inject clean water into the inlet pipe to clean the pipe, and stop cleaning when you see that there is clean water in the outlet pipe and start to flow out.

7. Then turn on the compressor gas transmission switch and water supply switch.

8. Then open one sub-valve on the water separator, close the other valves, and then turn off after washing and continue to open the other one until all the floor heating pipes are cleaned.

Generally, a pulse booster pump (single branch) is used for cleaning

<> what is the best way to clean floor heating?

There are three common cleaning methods for floor heating: chemical cleaning, projectile cleaning, and pulsed wave physical cleaning, which have their own advantages and disadvantages, and are more suitable for floor heating cleaning.

Summary. The projectile cleaning effect is the best, the chemical cleaning is the most convenient, and the pulsed wave physical cleaning is the most comprehensive.

Chemical cleaning.

Principle. Chemical cleaning is to pour the chemical agent from the water inlet valve, and the chemical reacts with the scale impurities on the inner wall of the floor heating pipe to make the scale and impurities fall off and decompose, so that the pipeline can be restored to smoothness.

Advantages: It will not block the water flow, the cleaning method is effective, and the operation method is relatively simple and safe.

Disadvantages: The chemicals used will have a certain corrosive effect on the inner wall of the floor heating pipe, and the floor heating cannot be cleaned often by this method, and the sewage discharge after use will have an impact on the environment.

Projectile cleaning.

Principle. Projectile cleaning is to inject a cleaning bullet slightly larger than the inner wall of the floor heating pipe into the floor heating pipe, and use the friction between the cleaning bomb and the floor heating pipe to wipe off the scale.

Advantages: The cleaning effect of limescale is very strong, and it can restore the floor heating pipe to its original color.

Disadvantages: The cleaning time is long, the operation is too troublesome, and the cleaning bomb is easy to get stuck at the bend of the floor heating pipe.

Pulsed wave physical cleaning.

Principle. Pulse wave physical cleaning is to connect the manifold with a high-pressure pulse air flow, and then the scale and impurities on the floor heating pipe wall are removed through the scouring and high-frequency vibration of the pulse wave air flow.

Advantages: There will be no damage to the floor heating pipes and water separators, and equipment such as water collectors and valves can be cleaned, while other methods cannot clean water collectors and valves.

Disadvantages: It is difficult to remove scale when the scale is thick.

Pulse cleaning method is the most commonly used cleaning method at present.

There are currently two main methods of geothermal cleaning:

1. Pulse cleaning method: It is to use high-pressure pulse air flow into the water separator, and control each geothermal pipe by the shunt method, the high-pressure pulse air flow continuously washes the wall of the geothermal pipe, and the impurities and dirt are continuously discharged with high pressure, and the whole cleaning process has no damage to the water separator, which is the preferred geothermal cleaning method at present.

2. Sponge ball cleaning: sponge cleaning dissociates the geothermal pipe from the water separator, puts the cleaning sponge ball in the pneumatic or geothermal pipe, and then stucks the pneumatic on the geothermal pipe, and uses compressed air to eject the cleaning into the geothermal pipe, and comes out from the other end of the pipe to achieve the cleaning purpose. The cleaning effect is good, and the tube can be restored to its original color.

The disadvantage is that the efficiency of unpacking is relatively low, and it is easy to get stuck when there are joints and bends in the geothermal pipe.

3. Reagent cleaning: It should be said that the cleaning effect of reagent cleaning is very good, but it is rarely used because it is easy to corrode and aging geothermal pipes and system components and pollute emissions.

Additional information: Geothermal cleaning intervals.

Geothermal cleaning can be cleaned all year round, the best time is the early stage of the heating process every year, due to the different water quality of each lot for more than two years have not been cleaned customers at any time to pay attention to cleaning to prevent blockage, winter heating customers should pay attention to drainage and anti-freezing.

1. Chemical soaking:

Advantages: Thorough cleaning, can fully dissolve the slime attached to the pipe wall, high-quality food-grade raw materials will not cause corrosion to the geothermal pipe;

Disadvantages: The chemical reagents used in geothermal cleaning, strong acid or strong alkali preparations, do not consider the bearing capacity of geothermal pipes, and the pipeline and related components are seriously corroded, and the purpose of scale removal cannot be achieved without corrosion.

2. Projectile cleaning:

Advantages: Thorough cleaning, using the friction between the cleaning bomb and the pipe wall to remove the slime attached to the pipe wall, without damaging the geothermal pipeline;

3. Pulse wave physical cleaning

Advantages: no need for chemicals, no disassembly of geothermal pipes, due to its unique cleaning principle, the main pipeline and valve of the geothermal separator can be cleaned at the same time, so as to avoid long-term scaling and valve blockage;

Disadvantages: It is ineffective for scale, the construction is limited by space, some family geothermal water separators are placed in hidden places, and it is not easy to construct when the two ends of the water separator are too close to the wall.

The best way is not to clean, install the underfloor heating descaling filter - geothermal pass, and say goodbye to geothermal cleaning after installation!

Cleaning 2 types 1. Projectile cleaning Use a sponge ball to walk around the pipe, clean the pipe, and clean the valve and filter at the same time.

2. Pulse wave cleaning Pulse wave vibration cleaning pipeline.

Now I still use projectile cleaning, and both kinds of cleaning do not hurt the pipe.

Jilin Geothermal Cleaning Pipeline Dredging Company 63332211

Geothermal cleaning is divided into equipment cleaning and manual cleaning.

There are two types of equipment cleaning:

1. PSI bullet cleaning: sponge bullets with a diameter larger than the diameter of the geothermal pipe rub the pipe wall in the geothermal pipe to achieve a thorough cleaning effect.

2. Electric pulse cleaning: automatic pulse geothermal cleaning, using a combination of gas, water and electromagnetic pulse, through the internal vortex power to clean the geothermal pipe.

In terms of cleaning effect, the effect of bullet cleaning is more obvious, but the requirements for water separators and geothermal pipes are higher, and the specific equipment used for cleaning needs to be confirmed by professional cleaning personnel on site.

Dandong Chengda Geothermal Consulting**0415-3456822

Changchun Tianze cleaning agent, cleaning geothermal heat does not enter the house, pipeline well construction, use the circulating pump to pump the cleaning agent "quality inspection report" into the household pipeline, enter the water separator, and divide the cleaning agent into each pipeline by the water separator, fill the pipeline, flow out from the return pipe, enter the return barrel, and carry out 30 minutes of circular cleaning at a time. This cleaning method can effectively remove rust, sediment particles, iron filings and viscous substances produced by water, clean thoroughly, and the low noise of the circulating pump does not affect the normal life of the room and neighbors, and there is no need to clean the indoor hygiene. As long as there is water and electricity in the home, the cleaning can be completed. , sign a cleaning contract, and be responsible for the customer!! Tianze is worthy of everyone's trust!!

Now there are more cleaning methods are projectile cleaning and pulse cleaning, and there is an imported equipment that is exclusively introduced by Dalian Jinyide, which is completely cleaned without hurting the pipe fittings.

Geothermal cleaning can be done in two ways.

The first is sponge bullet cleaning, which is efficient and low-cost, and it needs to be used with a projectile launcher.

The second is pulse cleaning, which is costly, and it is recommended to use sponge bullet cleaning for cleaning with high-pressure pulse gas, which is the mainstream method.

Generally, it is projectile cleaning and pulse cleaning, and only Dalian Jinyide's imported equipment for household use does not hurt the tube.

Use the pulse of the bar safe and reliable.

In the search Changchun Guo master plumbing rhinestones.

Professional Pulse Geothermal Cleaning Heating Cleaning No disassembly required Convenient and fast.

Professional repair of water leakage, installation of water supply and discharge, installation of toilet basin water heater, rhinestone drilling.

It is better to use pulse cleaning, I am professionally cleaned, clean and thorough, no damage to the tube, no residue, the effect is very obvious.

New type of electric underfloor heating.

Electric floor heating is a heating method in which the upper limit of the allowable working temperature is 65 degrees Celsius is buried in the floor, the heating cable is used as the heat source to heat the floor, and then the temperature of the room or floor is controlled by the temperature control panel to achieve radiant heating.

It is generally divided into two types: single conductor and double conductor, the electromagnetic radiation of double conductor will be smaller than that of single conductor, so it is also more suitable for home heating, and single conductor is more suitable for outdoor floor heating.

The cleaning of the pulse is not clean. After the projectile was cleaned, the inner walls of the pipes were scratched.

The pulse is good, my home is the pulse Changchun Guangle geothermal for professional cleaning.

At the suggestion of the Jade Emperor Tai Bai Xing, Sun Wukong was summoned to the Heavenly Palace to be Bi Ma Wen, who was in charge of raising horses. At that time, the Monkey King was overjoyed. Afterwards, Wukong found out that this was an unpopular official position, and knew that he had been fooled, so he angrily returned to the Huaguo Mountain Water Curtain Cave and set up the banner of "Monkey King".

The Jade Emperor ordered King Tota and Prince Nezha to take the Heavenly Soldiers to capture Wukong, but they were defeated by Wukong. The Jade Emperor had no choice but to admit the name of "Monkey King" and order Sun Wukong to go to the Heavenly Palace to manage Pan Taoyuan.