How to reset the new BMW 320i maintenance light to zero? 10

The specific steps are as follows:

1.The ignition key hits the position "0".

2.Press and hold the button on the mileage display (on the lower left side of the instrument cluster) and turn the ignition key to position "1".

3.Continue to press and hold the button for about 5 seconds until the OELSERVICE or INSPEKTION is displayed, waiting for the RESET or RE to flash.

4.Press and hold the button for a short time while the display is flashing to reset the service interval. After the display briefly shows the new cycle, the brake fluid change cycle is displayed instead.

The following information appears on the display: the clock symbol and the REST (reset) or "RE" flash.

5.Press and hold the button again for about 5 seconds until the display "rest" (reset)" or "re" flashes.

6.Press and hold the button briefly while the display is flashing to reset the brake fluid cycle.

When the maintenance light is on, it means that your car has reached the maintenance mileage and needs to be maintained. I used to use the original engine oil when it was more than half a year to need maintenance, I think the cycle is too short, now I have changed the G T magic red oil, is the base oil of four types of PAO, after using the anti-recession ability is getting stronger and stronger, the maintenance mileage can reach 15000 kilometers, once a year maintenance is enough, when the maintenance is ready to let the master to zero the maintenance lamp, it will be a lot more convenient.

Maintenance lamp zeroing, generally the master will do. The maintenance cycle has a lot to do with the quality of the oil, and the good quality accessories will greatly extend the maintenance cycle during maintenance. Like the G T Magic Red Engine Oil I use for maintenance now, the base oil of Class IV PAO is of good quality, strong anti-recession ability, long maintenance cycle, and there is no problem at all when it is changed once in 15,000 kilometers, which is so convenient that it is not good.

You can try the following, one is to use a special detector to zero, and the second is to use the multi-function button on the turn signal handle to cooperate with the button on the meter to zero.

After changing the oil and other maintenance, it must be reset to zero. I use G T Magic Red Engine Oil to maintain it myself, and after maintenance, it is manually reset to zero. This engine oil is a base oil of Class IV PAO, with good anti-recession ability, maintenance mileage can be increased from 10,000 kilometers to 15,000 kilometers, the power is very good, clean and silent is good, it can take good care of the engine, and the experience is very good.

BMW 320i maintenance light clearance way.

1. Running the vehicle.

2. Click on the "maintenance service item requirements" in the car machine system.

3. Then click "Upgrade Maintenance Cycle Time" to carry out calibration.

Cleaning method of maintenance lights for other BMW 5 series models (this method is applicable to old models) 1. Turn off the starting motor.

2. Look for the coarse function button embedded in the lower left of the dashboard in the car and press and hold.

3. Press and hold the key to start and plug in.

4. Keep pressing the lower left function key for 5 seconds, and then "oilservice" or "inspection" and "reset" will occur.

5. Release the button and press and hold the button again for about 5 seconds until "reset" gradually flashes.

6. Release the button and press the button again.

7. Until the word "endsia" occurs.

8. Calibration is carried out.

When the maintenance light flashes, it means that the vehicle should be serviced. In addition, there are some models that cannot be cleared manually by the manual method, so it is necessary to use a dedicated on-board computer to clear the code.

Automotive technology maintains maintenance regulations to a minimum. As everyone knows, some on-time maintenance work still needs to be completed, so that the safety of the vehicle can be ensured. If you are driving on a road in a difficult environment, you will need to carry out special maintenance even in the middle of the required cycle time.

Millions of car purchase subsidies.

1. The ignition key hits the position "0";

2. Press and hold the button of the mileage display (on the lower left side of the instrument cluster) and rotate the ignition key to position "1";

3. Continue to press and hold the button for about 5 seconds until it shows "OELSERVICE" (oil change maintenance) or inspektion (maintenance inspection), and wait for "reset" or "re" to flash;

4. Press and hold the button for a short time when the display is flashing to reset the maintenance cycle. After a brief indication of the new cycle of the old digger, the brake fluid change cycle is displayed instead. The following information appears on the display: the clock symbol and the REST (reset) or "RE" flash.

5. Press and hold the button again for about 5 seconds until the display "rest" or "re" flashes;

6. Press and hold the button briefly when the monitor is flashing to reset the brake fluid cycle.

1.Turn off the ignition and turn off the ignition. （key-off）2.Press and hold the button on the bottom left of the dashboard in the car, as shown in the image above.

3.Turn on the ignition. (Illuminate the dashboard in the car) 4Press and hold the lower left button for 5 seconds to see when the words "oilservice" or "inspection" and "reset" occur.

5.Release the button and press and hold the button again for about 5 seconds until the "reset" gradually flashes.

6.Release the button and press and hold the button again.

7.The new curing spacing indicates.

8.Press the button again and the word "endsia" appears.

9.Calibration is carried out.

The handling performance of the BMW 3 Series is very prominent, with a heavy sense of handling, precise orientation, a solid chassis, a clear road sense, a dexterous brake pedal, and a prominent actual effect in silent mode; The rugged suspension system improves the reliability of cornering; The inherent advantages of rear-wheel drive alleviate the tendency to understeer; However, some netizens reported that their clutch schedules were too long. The driving force is rapid, the development is fast, the turbo base increase brigade residual pressure vehicle engine is strong, and the high-speed operation is stable.

Millions of car purchase subsidies.

1.Turn off the ignition, turn off the oak and turn off the engine. (Key off) 2Press the button in the lower left corner of the dashboard and be late as shown in the image above.

3.Turn on the ignition. (Just light up the dashboard).

4.Press and hold the button in the lower left corner for 5 seconds until the words "Oil" or "Check" and "Reset" appear.

5.Release the button and press the button again for about 5 seconds until the "Reset" starts flashing.

6.Release the button and hold it again.

7.New maintenance interval display.

8.Press the button again and the word "end sia" appears.

9.The reset is complete.

The handling performance of the BMW 3 Series is particularly prominent, with a strong sense of control, precise direction, solid chassis, clear road feeling, sensitive braking, and outstanding silent effect. The powerful suspension system improves its cornering stability; The innate advantages of rear-wheel drive alleviate the tendency to understeer; However, some netizens reported that their clutch journey was too long. The power is fast, the start is fast, the turbocharged engine is explosive, and the high-speed operation is stable.