Does the headlight refurbishment work? How to get a car headlight refurbishment?

Hello, the effect is still OK, 1. Repair scope: various types of headlights made of plexiglass, acrylic PP, PC, PE, ABS and other materials 2. Repair type: yellowing, cracking, blurring, scratches; (Note:.)

It is necessary to ensure that the headlights do not penetrate into the inside, ensure that there are no stains in the headlights, whether the plastic corners are intact, and whether the headlights are intact) Note: In the case of scratches, yellowing, cracks, and serious oxide layers, the effect of the repair coating needs to be evaluated. a. After repairing the coating to achieve satisfactory results, the general scratches are not damaged to exceed the thickness of the lamp surface by 50 b, yellowing, cracking, and the severity of the oxide layer is identified and observed that the surface of the paint is dull, rough, and many cracks that are squeezing to the touch, so it is necessary to do grinding treatment and then the coating is reduced.

Extended InformationBaoqi Headlight Refurbishment Technology Baoqi headlamp refurbishment technology adopts repair materials imported from Germany, which can repair all kinds of slight scratches, deep scratches, oxidative corrosion, cracks and other phenomena on the surface of headlights

The rumored lamp repair fluid on the Internet is said to be able to avoid damage to the lamp body and restore the effect of the headlights. If the surface part is not removed by physical grinding, the aging part can only be dissolved by chemical solvents. In essence, it is also an act of changing the soup without changing the medicine.

However, because the sealing around the headlight is not particularly good, if the chemical solution falls to other places, it will inevitably damage other parts, which is more dangerous.

Therefore, the lamp repair fluid is either more harmful than good, or it is simply psychological comfort. Don't easily believe these online rumors, it's understandable to love cars, but be sure to distinguish the authenticity of the information.

Finally, a little idea. Although the headlight assembly is more expensive, the headlight cover is very cheap, if the headlight cover is dim and yellow, it is no problem to replace a headlight cover directly. Of course, it is also possible for local tyrants to directly change the headlight assembly.

Headlight refurbishment, as the name suggests, the surface of the headlight has a variety of oxidation, corrosion, cracking and other phenomena that need to be repaired and refurbished, and the restoration and renovation will be restored to the original meaning, and then we investigated a lot of information about the headlight refurbishment, which is really wonderful, so what is the effect of these repairs and refurbishments, and can it help the owners.

1. Baoqi headlight refurbishment technology.

The new technology of Baoqi headlamp refurbishment adopts the repair material imported from Germany, which can repair various slight scratches, deep scratches, oxidative corrosion, cracks and other phenomena on the surface of the headlight, but if the surface of the headlight penetrates, it cannot be repaired.

Advantages: less construction time, small footprint, faster return on investment, long warranty time, high light transmittance.

In the new technology of Baoqi headlamp refurbishment, the equipment only needs a set, this set of equipment covers an area of very small, the construction time repairs the entire headlight less than 20-30 minutes, which greatly saves the time cost for the main door, and the repair can be guaranteed for 2 years. And the light transmission is up to 99% and does not affect it at all.

Disadvantages, every time the headlights are repaired, the headlights need to be removed, which increases the repair time, and some models of headlights are very difficult to disassemble, such as Audi. Of course, it is also possible not to disassemble, but the construction personnel need to be very skilled.

2. Fumigation lamp. What is a smoked lamp? Fumigation lamp is a popular equipment for repairing headlights on the market, which only needs a pot, a jar, and a little repair material to achieve the effect of repairing headlights. It is very convenient to use.

Advantages: fast speed, portable, small footprint, light transmittance is OK.

Disadvantages: The warranty time is short, only 2-3 months can be guaranteed. Generally, it is more suitable for low-cost models.

Summary: After looking at the above two headlight repair and refurbishment cases, I believe that many car owners have a certain understanding, if your headlights have the above symptoms, you can choose the corresponding construction plan according to your actual needs.

Of course there will be the same as new.

You can find a nearby repair shop with certain maintenance experience to polish the surface of the headlamp housing. The lampshade is aging, and we can deal with it in the following way:

1. Use masking paper to stick up the perimeter of the lampshade to avoid damaging the surrounding paint when sanding and polishing, and it is best to use a wider masking paper.

2. Use sandpaper to slowly grind off the cracks on the lampshade, first use 240 sandpaper for coarse grinding, then switch to 400 or 600 fine grinding, and finally use 1000 fine grinding. Note: It is best to wrap a flat small wooden block with sandpaper for sanding, otherwise the grinding effect may be uneven.

3. After the cracks are ground off, polish with a polishing machine and polishing wax.

Ways to maintain your car's headlights:

1. Check the tightness of the headlamp.

If there is water vapor intrusion in the headlamp, it will reduce the service life of the bulb, so it is necessary to check the tightness of the headlamp. If the sealing ring between the light distribution lens and the reflector is found to be damaged, it should be replaced in time.

2. Clean the mirror.

The reflector of a semi-enclosed headlamp becomes black and the luminosity decreases and should be replaced. If there is only dust on the reflector, it can be blown clean with compressed air instead of replacing it. For the mirror that cannot be blown clean, if the mirror coating material is chrome-plated, due to the high hardness, you can use deer skin dipped in absolute ethanol (content of more than 95%) from the inside of the mirror to the outside in a spiral shape and gently wipe it carefully.

3. Clean the bulb.

Halogen bulbs can be scrubbed with absorbent cotton soaked in ethanol (90%). Be careful not to scrub the lights when the lights have just gone out and the bulbs are still hot.

First, the headlight spray paint refurbishment method, that is, the UV paint sandblasted onto the surface of the lamp, through the UV lamp or solar rays (that is, ultraviolet rays) for drying operations, but this kind of repair method, must be in the dust-free workshop, UV lamps are also more expensive, so it is not recommended to use this product in car beauty shops or car repair shops, because to buy a set of equipment, you have to slightly repair dozens of headlights to earn the equipment back, and cheap equipment, that is, self-spraying UV paint, then you can use UV lights, Either the sun ultraviolet rays are dried, so that it is easy to make the surface of the headlamp pockmarked and dust particles, which belongs to the defects after the headlamp repair, and after the repair method is repaired, the headlights are also easy to peel, compared to what we have seen, the appearance of the headlights peeling, just like the varnish peeling on the surface of the car paint, so this repair method is suitable for personal DIY, not suitable for customers to construct, because the customer's pickiness is the most difficult for us to deal with, because of the quality problem he will give you a bargain, Leave without even giving money! In the end, it was unpleasant for both parties!

Second, the headlamp polishing and refurbishment method, this method of refurbishing the headlights is the most commonly used method of refurbishing the headlights in the car beauty shop, using sandpaper polishing and polishing in turn with coarse wax and medium coarse, I can only say two words, the total headlight refurbishment method, the corners are not easy to throw, and after polishing the headlights in about two months, the light transmittance of the lamp surface decreases, because the lamp surface is plastic, not paint, so after the loss of the wax component of the lamp surface, the natural light transmittance is not very high, As a result, the store basically repairs the headlights for customers, either throwing them for free, or charging less, because the quality changes too quickly in the later stage! So until now, headlight refurbishment is still not the main project of our car beauty shop, because this repair method cannot increase the fee!

Third: headlight fumigation repair and refurbishment method: this kind of headlight is the latest car headlight refurbishment repair method, the raw materials are specially processed and blended, the main raw materials are imported from Germany, his headlight repair principle is very simple, sandpaper polished after the headlight, under the microscope ** is like a mountain ravine, uneven, this material is the use of a heater, plus alcohol as a volatile agent, like this raw material is attached to the mountain ravine sandpaper print on the surface of the lamp by steam method, Creates an even filling effect!

And it dries in three seconds, if you can't repair it once, you can continue to repeat the renovation, and the headlight surface after repair is smooth, bright and uniform! Flawless, the key is that the repair is fast, and it dries in a few seconds, without the help of any baking lamp equipment.

With the development of automotive technology, the types of automobile headlights are also constantly improving, from halogen headlights to the current laser headlights have been applied to different models, different types of headlight sources have their own advantages and disadvantages, and automobile headlights can be repaired to a certain extent.

1. Definition: Car headlights are a very important component, when we use the car for a long time, we will find that the light emitted by the headlights will become dim and yellow, and the brightness will be reduced, especially on the halogen headlights, which is more obvious. At present, polycarbonate material is widely used in the headlamp light shield, which has light weight, good light transmittance, stable optical properties, good material stability and high temperature resistance.

2. Reasons for the decrease in brightness of the light:

1) Cause 1 - Scratches and dust left by foreign objects such as external wind, sand, gravel and other foreign objects on the lampshade. The wind, sand and gravel on the road will have a certain impact on the headlights.

2) Reason 2 - The heat generated when the internal bulb emits light causes the plastic lampshade to age and turn yellow. The lampshade of the headlamp is injection molded by carbonate or polymethyl methacrylate plastic, whether it is a halogen lamp, a xenon lamp or an LED lamp, it will generate a lot of heat when it is bright, and this heat will accelerate the aging of the plastic, so that the lampshade is no longer clear and transparent, and even dim and yellow, which directly affects the lighting effect.

3. Traditional repair headlights.

Because of the above reasons, the concept of repairing headlights was born. The traditional restoration is to polish the headlamp cover, and then add waxing and coating techniques to make the headlight bright and transparent again. This practice is just like the daily car paint glaze, first polish and then protect, and it will inevitably damage the body after a long time.

4. Headlight renovation method.

There are many ways to refurbish headlights, fumigation, polishing, coating, and so on.

5. Pay attention to details.

During the sanding process, according to the degree of repair, be sure to replace the sandpaper in time to avoid unnecessary scratches on the surface of the headlights!

In general, the headlamp turns yellow, and it is the membrane that is damaged, mainly the plastic surface (yellowish, whitish, cracked, small shallow scratches). In this case, the headlamp mask is repairable and refurbished.

Headlight refurbishment ** is more expensive, only about 500 yuan, so it is better to do it yourself!

This is also done with specialized products and then equipped with professional people.

There are three levels of light modification:

Primary modification: white halogen bulb and high-power halogen bulb Modification cost: 60 yuan -300 yuan Modification effect: not obvious (not recommended).

Intermediate modification: xenon brightening bulb Modification cost: 300 yuan-800 yuan Modification effect: general (not recommended, it belongs to rogue modification).

Top modification: HID xenon lamp + modified assembly + plus lens Modification cost: 3000 yuan - 10000 yuan Modification effect: excellent (low beam does not affect others, high beam is strong).

Headlight refurbishment can be maintained for one year.

1. Scope of repair: various types of headlights made of plexiglass, acrylic PP, PC, PE, ABS and other materials.

2. Repair type: yellowing, cracking, blurring, scratches; Note: It must be ensured that the headlights do not penetrate into the inside, that there are no stains in the headlights, that the plastic corners are intact, and that the headlights are intact.

Baoqi headlight refurbishment technology:

The new refurbishment technology of Baoqi headlights adopts the repair materials imported from Germany, which can repair all kinds of minor scratches, deep scratches and oxidative corrosion on the surface of the headlights.

cracks and so on, but if the surface of the headlight penetrates, it cannot be repaired. The construction time is small, the area is small, the return on cost is relatively fast, the warranty time is long, and the light transmittance is high.

Easy to learn, learning time can be mastered in one to two months, at present, car spraying and beauty has become a larger and larger attractive "cake" in the automotive aftermarket service chain, compared with other traditional industries, the high profits it creates have become a wealth through train. There is a lack of professionals in the industry, the vast majority of enterprises lack technical support "congenitally", and there is a shortage of automotive sheet metal spraying and beauty professionals. Technicians in the automotive sheet metal spraying and beauty industry are in short supply all year round, and there are often multiple companies competing for a technician, and there is a shortage of all-round compound talents.

So as to provide a stage for the majority of people who are interested in the automotive sheet metal spraying and beauty industry to display their talents.

It is recommended not to renovate as much as possible, remove all the surface coating, and then re-coat! It does a lot of damage to the lampshade!

We do dismantling car parts, there is no one who can't, and the veteran can turn over to the layer. Many luxury cars such as BMW use repaired dismantling parts, which are cheap.

In addition to aging and scratches, the mirror is broken, and this repair process is much more complicated than the previous one. Many people on the market who encounter this situation have changed the assembly, and some will use the lampshade of the replacement factory, each with its own advantages and disadvantages. However, we have adopted a more complex but more ingenious Yiyue mirror fracture repair process, using a pure manual repair method to restore the damaged mirror, and the restoration effect can reach more than 90% of the original factory, which is suitable for most lamp types.