When is the best time to clean the floor heating and the best time to clean the floor heating

The cleaning of floor heating is generally divided into two periods: before and after heating. Because cleaning before heating can remove the biological slime and impurities in the pipe, so as to ensure the normal use during the heating period.

The cleaning of the heating is the most important, because the water quality supplied by the water company is generally poor, and there are impurities and bacteria in it, and the reproduction and regeneration of bacteria are generally in spring and summer, if not completely removed, it will cause great harm to the health of the occupants. In view of the situation that the floor heating is not hot and needs to be cleaned, you can find professional HVAC personnel to come to the door for maintenance and cleaning.

Whether the best time to clean geothermal energy is before or after heating has always been a concern and confusion for many geothermal users.

Since geothermal cleaning usually uses tap water instead of heating water. Therefore, it can be cleaned all year round. Whether it is cleaned before heating or after heating depends on the age of the geothermal water separator and geothermal accessories, whether it has been aged, unable to hold the water, etc.

Geothermal fittings that have aged and cannot hold water are cleaned during the heating period, and if not properly disposed of, there is a high risk of water bursts. Therefore, many customers have to give up cleaning at the suggestion of the cleaning staff and change to cleaning before heating in the next year. affected the geothermal heating of the year.

Suggestion: Geothermal users who have been used for more than five years and the water separator has been aging and other phenomena should choose geothermal cleaning before heating.

Floor heating cleaning is generally better before heating, the reason is that after we clean, the heating system will still be filled with water to prevent oxygen from entering and causing corrosion; There will still be a certain amount of scale and oxygen in the water, although it will not have a big impact on the floor heating pipe, but it will still have a little impact after all; Therefore, after cleaning before heating, it will not take long to turn on the heating, and the impact on heating will be minimized, so it is the best time;

There are also people who will clean when the heating is stopped, and generally this time will repair and maintain the problems found in the heating, and the cleaning is only incidental, so we must grasp the cleaning time according to our actual situation.

Generally, the floor heating is cleaned once a year or two, and it is best to clean it once a year if the water quality is not good.

You can also judge whether the floor heating should be cleaned from the following aspects?

1. The color is not correct.

The inner wall of the connecting pipe of the manifold is yellow, green, red rust, black, etc. This is caused by the long-term sedimentation and adhesion of calcium and magnesium ionized scale and biological slime to the inner side of the pipe wall.

2. Low room temperature.

The indoor temperature is decreasing year by year. This is because the slime scale on the inner wall of the tube hinders the transfer of temperature.

3. The flow rate is small.

The amount of water flowing through the floor heating pipes is less than in previous years. This is due to excessive compaction of biological slime in the pipe, resulting in local narrowing, and it is easy to cause the pipeline to be blocked and unusable if it is not cleaned.

4. The water flow is slow.

Water is discharged one by one, and some pipelines have a slow flow or even no water. This is due to narrowing or embolization of the tubing.

5. It has not been washed for many years.

There is no cleaning for more than 3 heating seasons, and it is generally cleaned once in 2 or 3 heating periods.

For more information, please call us or make an appointment for cleaning.

Actually, this is wrong. The north is the central heating heat source, the south is basically their own gas wall-hung boiler heating, the water quality is very different, the former high temperature water, the latter low temperature, and the latter home decoration in the installation of water quality protection treatment (most of them), the degree of scaling, the south is "far worse" than the north. The cleaning method is to use a washing machine, two water pipes, connect the water pipes in the home, the washing machine and the valve of the floor heating.

When the washer starts working, the water comes out of the outlet pipe, and it is really dirty, more than the water in the sewer. So, the feeling should be cleaned. Before you know it, it's late autumn, will winter be far away?

In order not to freeze into a dog in winter, it is time to prepare for winter heating. Laying floor heating at home is more comfortable and healthy than air conditioning, but if the water floor heating is not cleaned, the heating efficiency will be reduced, and the cleaning is troublesome, what should I do?

Now every household has floor heating, and floor heating is really beneficial to the people. But after a year or two, you'll find that the underfloor heating isn't as hot as it used to be. And the indoor temperature of users on the same floor is also different, is it the property that is making trouble.

The real reason is actually this. If the pipeline is not effectively cleaned for a long time, on the one hand, the water flow will be reduced, the flow rate will be slowed down, and the indoor temperature will also drop significantly; On the other hand, it may cause pipeline embolism and cannot be dredged, resulting in permanent failure of the floor heating pipeline, which is irreversible.

Theoretically, the household heating is a closed cycle, which will not be very dirty in the case of oxygen-blocking pipes, and often change fresh water into the system, but will corrode the metal parts. After the floor slab has been poured, this movable splice formwork with grooves on the surface is laid, and then the geothermal pipes are embedded into the grooves of the formwork, and finally the laminate floor is laid on top. The purpose of this is to make it easier to replace or clean the geothermal pipes.

Looking at the color of the manifold pipe, if it turns brown, black, green and other darker colors, it is necessary to clean the floor heating at this time, because there are already a lot of calcium and magnesium ions in it.

It should be at night, because the temperature is the lowest at night, and it is very comfortable to turn on the floor heating at that time.

Generally, the best time to clean the floor heating is before the heating comes at this time, and it is also very convenient.

The underfloor heating is cleaned every two years. Generally, it is divided into cleaning before heating or after heating. Geothermal users who have used it for more than five years are best to choose geothermal cleaning before heating.

Underfloor heating is generally cleaned before heating, or at the beginning of heating. That is, there are already people who have started it, and some are ready to start cleaning. Different regions, heating time is slightly different, we start heating this day, start heating pipe water injection, related heating preparation.

In general, the best time to clean the underfloor heating is the week before the heating is delivered, and it will be very warm throughout the winter.

The choice of cleaning time for underfloor heating.

Under normal circumstances, underfloor heating can be cleaned every three to four years. And for places with poor heating water, it is necessary to wash it about once every one to two years. If there is a significant cooling due to the blockage of the pipe, do not wait for the age and need to be cleaned in time.

As long as the indoor and outdoor valves can be effectively opened and closed, the underfloor heating can be cleaned at any time of the year. If the valve fails, it is best to clean it outside of the heating period, and repair and replace the corresponding components.

There are many households whose floor heating is not hot, and they insist on it for a long time, and only think of cleaning it when it cannot be solved and improved, but at this time the heating period has passed halfway. Due to the long delay, it also led to half of the time not enjoying the normal heating effect, which is equivalent to the early heating costs in vain.

Therefore, in the selection of time for cleaning the geothermal heat, it is best at the beginning of the heating or at the end of the heating. When the heating is just opened, the floor heating is clear, which does not affect the heating effect in winter. It is also beneficial to clean it at the end of the heating process, as the cleaning effect will be more thorough after the heating water is soaked for a long time throughout the winter.

The best cleaning period of the floor heating pipe is before, during and after heating, and the cleaning before heating can remove the biological slime and impurities in the pipe, so as to ensure the normal use during the heating period.

Cleaning during heating can intuitively feel the heating effect of the piping system after removing biological slime and impurities, and prevent the regeneration and reproduction of bacteria.

Cleaning after heating is the most important, because the tap water supplied by the water company is generally of poor quality, and there are impurities and bacteria in it, and the reproduction and regeneration of bacteria are generally in spring and summer, if it is not completely removed, it will cause great harm to the health of users.

Hello, sorry to keep you waiting. 1. First of all, floor heating cleaning is very complicated, non-professionals are not recommended to clean by hand, it is best to find a professional cleaning floor heating company for cleaning; 2. Clean the floor heating once every 2 to 3 years, if the quality of the water is not good or the conditions permit, it is best to clean it once a year, because in the process of use, there may be a lot of biological slime in the water, which is easy to accumulate on the heating pipe when mixed with metal corrosion, and there will be blockage after a long time, which will affect the smoothness of water flow and the effect of heating will also be affected; 3. It is best to clean the floor heating before and after heating, so that the heating effect can be better, and the use of floor heating can be longer. If my answer can help you, please give me a thumbs up Thank you!

It is best to clean and clean the floor heating after heating.

Floor heating cleaning period: before, during and after heating. Cleaning after heating is the most important. Due to the poor water quality, it is easy to breed a large number of bacteria, and if it is not completely removed, it will cause great harm to the health of users.

Why does underfloor heating need to be cleaned

1. Due to long-term use, scale and slime will be deposited in the pipe. On the one hand, it will affect the flow of water; On the one hand, it will cause pipeline embolism.

2. Perennial water accumulation in the pipe is easy to breed a large number of bacteria, which has caused harm to the health of the people.

What is the difference between cleaning before and after heating

Cleaning before the heating season can remove dirt, sludge and bacteria from the geothermal pipes in time, so as to avoid the pipes being blocked and the heating effect of the room will be unnecessarily affected.

After the end of heating, the cleaning is because during the heating period due to the circulation of water, will not produce too much dirt, but after the end of the heating season, the geothermal heat is not used, at this time there is no water in the pipe or the water is stationary, impurities will be generated, timely cleaning can reduce the difficulty of cleaning in the future.

Underfloor heating cleaning method

1. Filter cleaning

Close the valve first, then open the filter, clean it, and check whether the filter is damaged or blocked.

2. Soak and clean with chemicals

Open the inlet tube; Inject the cleaning solution into the tube; Start the circulating pump for 30 minutes; After that, open the cold water valve and drain the turbid water.

3. Projectile cleaning

The disadvantage is that the underfloor heating pipes need to be disassembled. Especially in the case of encountering a joint in the underground pipeline, it is easy to cause inconvenience in construction. In addition, secondary damage may be caused to the relevant parts.

4. Pulse wave physical cleaning

No chemicals are required, no disassembly is required, and cleaning is thorough. The disadvantage is that the construction is limited by space and the construction is difficult.