Regarding the hardness of the DONICO F1 hardened sleeve

Dornick F1 is a set of astringent glue, different from viscous rubber, the pursuit of the effect of springing, the hardness is not indicated, the hardness is around 35-37 degrees, quite soft, short life, no need to brush glue, the skin is very fragile.

The F1 set of adhesives is the most outstanding masterpiece of Donic Company, and only ordinary glue is required as the adhesive before use.

F1's super internal energy, only with hydrosol, has a super first-class speed and rotation, by enhancing the internal energy fast glue effect to bring faster ball speed and strong spin, the internal energy fast glue effect makes this rubber have the fastest speed and rotation.

Extended information: The most excellent feature of F1 rubber is that it has reached the world's top level in terms of hand control, rotation, speed, etc., and has been used by many world-class golfers, with excellent performance and won numerous honors, and has been very popular in the European market and the Chinese market, which can be called a model of table tennis set of rubber.

The internal energy performance of F1 is very superior, as if it is a rubber that has been filled with fast glue many times. The high-performance rubber gives players more possibilities. In addition to high speed and high rotation, it also has a good feel and the same sound as fast glue.

Therefore, if you use fast glue on this rubber, it is easy to over-inflate the rubber.

In the process of measuring the hardness of the rubber sleeve, it is necessary to pass through a special test tool, and then the hardness in it can be measured.

Dornick's F-series rubber is a product of a long time ago, and a piece of F2 used in the past is also not durable, and the rubber surface begins to age in about two weeks. The friction coefficient of the top adhesive of the F series of rubber sets.

It is very poor, and the rotation is also very poor, but because the F series of top rubber is relatively brittle, and the sponge is soft, and the ball is held deep and the ball is taken off quickly, the bounce performance of the F series rubber is very good, especially suitable for crossboard backhand bounce. If the landlord uses a single cypress, it is not recommended to use the German set. It is recommended to use a day set.

Butterfly bus, Bryce Speed, or T64, if you really want to use the Decau, we recommend Andro's 470, which are all very suitable for ordering. cypress.

According to the measured data of the 7th issue of "Table Tennis World" in 2011, the hardness of the rubber will slowly decrease after use, and the hardness of the Shore ball is about 27 degrees after the use of the Max version of F1 for a period of time, which is close to the butterfly bus, very soft, and more suitable for the single cypress bottom plate.

The hardness of the hardened version will be about 2 degrees harder than that of the ordinary version, and there will be a very obvious difference in the feel, which will increase some difficulty if you want to penetrate it. Counting the set of glue in the new time, it will be a little harder than the old one, so the new one will feel much harder.

In addition, the monocypress board is still softer, and the hard one cannot exert the power of the monocypress.

It is recommended that if you don't feel that ordinary F1 is particularly difficult to use, don't change to a hard one.

What is the hardness of Donic F1 in table tennis rubber?

Answer: 1. The hardness marked by the table tennis rubber refers to the hardness of the sponge.

2. As far as China is concerned, there are two measurement methods for measuring the hardness of table tennis rubber.

1. The "Shaw needle degree" measurement method used by Shanghai "Double Happiness".

2. The "Fahrenheit Spherical Degree" measurement method used by Tianjin "729".

The conversion relationship between the two measurement methods is shown in the figure below

3. Although the hardness of Dornick F1 anti-rubber sleeve rubber is not clearly marked, it is shown in the following figure.

Fourth, the field is measured by the "729" "Fahrenheit spherical degree" measurement method, and the "spherical hardness scale" displays:

1. The hardness of the sponge of Dornik F1 is 45 degrees.

2. The hardness of DORNIK F1 rubber is 46 degrees.

Hope it works.

Only domestic rubber has the hardness of a sponge. Coats are rare.

F1 is a good rubber, fast penetration. There are several models in this series, namely F2 and F3, which have some changes in speed.

The hardness of this rubber is not officially marked.

However, it can be compared with other marked rubbers, the hardness of ES marked is 45, and the rubber with F1 feels harder when played, and it should be 47.

I don't say it directly, I think it's around 35 degrees, and the sea is on the soft side.

I didn't say it, it's quite soft, it's Donoco - Textu's F1.

Hello! The difference between Dornick F1+ and Dornick F1 reinforcement is the thickness and hardness of the rubber. The thickness of the rubber of the DORNIK F1+ is , and the hardness is degrees, while the thickness of the rubber reinforced by the DORNIK F1 is 50 degrees.

This means that the rubber reinforced by Dornick F1 is stiffer and more suitable for players who like to play quickly and strongly. The Dornik F1+, on the other hand, is more suitable for players who need better control and spin. In addition, both Dornick F1+ and Dornick F1 Enhancement feature Dornick's Flex-Tech technology, which improves the elasticity and control of the racket, allowing players to have better control of the racket and get a better hitting feel.

In conclusion, Dornick F1+ and Dornick F1 Boost are both excellent table tennis sleeves, but they differ in hardness and thickness, making them suitable for players of the same type as Rubic. If you need more control and spin, then the Nick F1+ is the better choice. If you need a faster attack and more power, then the Sonick F1 boost is more for you.

Hope mine can help you <>