How to remove the adhesive paper attached to the glass

It is easy to remove it by blowing it hot with a hair dryer, and if there is any residual glue, you can use a cloth dipped in wind oil to wipe it slowly.

How to remove the sticker paper on the glass:

1. Chemical methods.

1) Wind oil essence removal method, with wind oil essence can remove self-adhesive paste. Apply wind oil essence (a little thicker) on the sticker, and wipe it off with a dry cloth after a moment of penetration, leaving no traces. If there is no wind oil, it can also be replaced by toothpaste, but the effect is slightly worse.

2) Hot towel removal method, you can first use a hot towel to cover the car logo soaked, and when it is soaked, some logo stickers can be easily torn off. "If the front windshield is not affixed with solar film, it can be removed with a special cleaning solution, such as asphalt cleaner." If you don't have these removers, you can also soak them in soapy water or laundry detergent water, which can also achieve a complete removal effect.

3) Hydrogen peroxide removal method, hydrogen peroxide can soften the adhesive that has hardened, the use method is to dip a towel in hydrogen peroxide, wipe the car mark, wipe it a few times, and it can be removed after about a minute.

4) Alcohol removal method, this method is similar to the hydrogen peroxide method, you can use a towel dipped in a small amount of alcohol to wipe the car mark repeatedly, but it must not be sprayed directly on the glass, otherwise it will damage the car film.

2. Physical methods.

1) Use a blade to gently scrape off the car mark, this method can easily get out of the car mark, but it will leave some scratches on your car, which will be very obvious at night.

2) hair dryer method, in the computer city to turn more children's shoes, you will find that js will use a hair dryer to blow the tape to open the box, so the advantage is that there is no trace after unpacking, but also to restore to the original, js this method can also be applied to us to clear the car logo on the car glass, use the electric hair dryer hot air to blow the car logo, and so on the rubber under the car logo softened, you can directly tear off.

3) The hard plastic sheet method, (such as the recharge card, game card, membership card, etc. we use) is similar to the blade method, because the hardness of the plastic sheet is small, and the damage to the glass is relatively small when scraping the car mark.

How to remove the sticker from the glass, just a simple tool, the sticker is removed immediately.

Use a wallpaper knife to open the point first, and then tear it by hand. It's not easy to tear if you're old. If there is a mark of glue, you can use wind oil essence, or faith in water, gasoline can also be used, and it will be wiped off.

And if the hair dryer is hot, he'll be able to pick it up and it'll be less sticky.

1. Heat with a hair dryer. Blow with the low temperature of the hair dryer, use the scraper to blow the corners, and then tear a little bit, and find that there are places that can't be torn off, you can tear and blow while cooperating with the hair dryer, so that you can easily tear it off. 2. Soak the film with vinegar, and then use a scraper to start the edge, and the part of the sticky can not be torn off, so that the vinegar can be soaked for a while.

3. Spray the four sides and corners of the film with alkaline soapy water, wait for a while, the film will automatically rise, and then we spray the soapy water on the place that is not sprayed in the middle and cannot be opened, and you can easily tear off it.

It can be removed with white vinegar dipped in non-woven fabric, and the following are the specific steps:

Tools required: Non-woven fabric, white vinegar.

1. Pour white vinegar into a small bowl.

2. Put two pieces of non-woven fabric in a small bowl and fully soak the non-woven fabric.

3. After soaking, put the non-woven fabric on the place where the sticker is to be removed, and stick it for half an hour.

4. Half an hour later, it can be seen that the sticker is easy to collapse.

5. At this time, we use non-woven fabric to clean up the remaining part.

6. Just wipe it like this.

7. In this way, the stickers are cleaned up, which is very clean and not sticky, and the effect is good.

The sticker stuck to the glass is peeled off the method as follows:

1. Wind oil essence.

Apply an appropriate amount of wind oil essence to the plastic sticker, wait for a while, and then wipe it vigorously with a dry rag to remove, if you are not equipped with wind oil essence at home, you can also use toothpaste instead.

2. Hot towels.

Soak the towel in water for a while, then cover the sticker, and when the sticker is thoroughly dyed, you can easily remove it.

3. Hydrogen peroxide.

If the sticker on the glass is already soft but the glue stain has become stubborn, you can wipe the glue stain several times with a towel dipped in the appropriate amount of hydrogen peroxide, and then it can be easily removed.

4. Alcohol. It is used in a similar way to hydrogen peroxide, which can be removed by dipping a dry towel in a small amount of alcohol and then wiping it repeatedly on the glass sticker. However, it should be noted that it cannot be applied directly to the glass, otherwise it will corrode the glass.

Advantages of glass films

1. The film we use in the home is usually a product that uses the inner surface of glass, which can effectively weaken the heat. By dispersing the glare that hits the room, it corrects the imbalance of light and makes the indoor environment more comfortable.

2. We all know that the ultraviolet rays in the sun's rays are harmful to our ** liquid sails, and will bring different degrees of brown to indoor carpets, art paintings and other home decorations. The glass film can bring visible light indoors and block ultraviolet rays outside, improving life security. Registers.

There are several ways to remove the sticker from the glass:

1. Hair dryer method: with the help of the heat blown out of the hair dryer, the glue is softened, and the card scraping is used while blowing, and finally wiped clean with a cloth;

2. Wind oil essence method: pour the wind oil essence on the sticker, wait for it to penetrate into the sticker, take a dry cloth and wipe it back and forth, and the sticker can be removed;

3. Detergent method: pour one of the detergents, meal washing, detergent, soap and other such detergents into warm water, dip the mixture with a towel and cloth, moisten the sticker, and then rub it, and then push it with a waste card, and repeat it several times to remove it;

4. Concealed vinegar method: soak the sticker with vinegar for a while, and after it is fully functional, take a hard card or ruler board, the back of the carving knife, etc., collapse the brief sticker, and wipe it clean;

5. Alcohol method: pour alcohol on the sticker, it can be softened quickly, and then wipe it clean with a rag;

6. Moisturizer method: apply it to the sticker, moisten it, and scrape the sticker off;

7. Cleaning ball method: first moisten the sticker with hot water with a towel, fully soak it thoroughly, pour some detergent on the cleaning ball, and gently scrape off the sticker.

1. Alcohol. We can use a cotton swab dipped in some alcohol and evenly apply them to the self-adhesive of the Hongxu glass sticker, and then you will see the self-adhesive slowly soften and dissolve. If you gently remove it with your hand, the sticker will leave the glass cleanly.

You can also wipe the glass with a towel dipped in alcohol to avoid damaging the glass.

2. Edible vinegar. We can also use a brush dipped in some vinegar, and then paint on the sticker, when the sticker is completely soaked in vinegar, we use a small shovel to gently scrape the glass door, so that it is easy to scrape off the sticker, if it is thicker paper, as long as it is soaked with more vinegar, prolong the time of action, so that it is easy to remove the sticker. And there are very few residual ingredients, and it will be as smooth as new when wiped with paper.

3. Wind oil essence. Wind oil essence also has a good cleaning effect, we can use wind oil essence to remove self-adhesive stickers, economical, convenient and fast code celebration. We can apply a certain amount of wind chicing oil essence on the self-adhesive sticker, and after a moment of penetration, it can be wiped off with a dry cloth without leaving a trace.

4. Hot compress method. Or we can take a towel or rag, wet it with hot water, and then apply the hot towel directly to the stickers, which can be easily removed when the stickers are soaked. This is a very simple way, but if you encounter stickers that have been sticking for a long time and have strong adhesion, you need to use a special cleaning solution to remove them.

The above is the skill I shared with you to tear off the sticker on the glass, you can learn about it if you need it, I hope it can help you.