Can a telecom multi interface cat connect two computers at the same time?

You don't need to set it, it will divide the bandwidth. After each machine is connected, you can directly pull out the broadband connection to access the Internet.

There are two ways to achieve wireless routing for cats with wireless routing function:

1. Crack the wireless cat and realize the wireless routing function.

The wireless cat is customized by telecommunications, and the wireless routing function is limited, and the wireless routing function can only be realized after cracking, so that mobile phones, laptops, and pads can access the Internet wirelessly. At the same time, the desktop computer has wired Internet access (no dial-up, direct Internet access).

There are many cracking tutorials on the Internet, and the cracking of wireless cats is different for each model. You search for the model of your wireless modem, find the tutorial, and check the settings.

Second, it can also be connected to a wireless router to achieve wifi Internet access.

You can also buy a wireless router and follow the following method to set up wireless Internet access:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the gateway address of the router (on the label behind the router) in the address bar of the browser, and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing), enter the Internet access and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Hello, first of all, thank you for your support to China Telecom. According to your description, yes, you can connect the network interface of the broadband cat and dial up to access the Internet, you can also connect the router to the Internet, you can use a network cable to connect your broadband modem and the router WAN port, and then use another network cable to connect the router LAN port and the computer, enter your router after the **, username and password to enter the router settings page - Setup Wizard - PPPOE - Enter your broadband user name and password - Set the wireless password and restart it.

China Telecom 4G has been officially commercialized, if you need to check 4G tariffs, check bills, pay phone bills, and buy mobile phones, please log in to Anhui Telecom's online business hall. Have a great day!

Hope mine is helpful to you and can get yours!

There are 2 network ports on the cat of telecommunications, and network port 1 can be used network port 2 can not be used because.

One of China Telecom's value-added services is ITV. If there are 2 network ports on the cat, one is for Internet access and the other is for ITV TV set-top boxes, so network port 2 cannot be used.

ITV broadband Internet audiovisual service, also known as ITV, is a new generation of interactive launched by China Telecom.

ITV Logo.

China Telecom Corporation is a large state-owned communications enterprise in China and a global partner of the Shanghai World Expo, and has been selected for many consecutive years"Fortune 500 companies"It is mainly engaged in comprehensive information services such as fixed **, mobile communications, satellite communications, Internet access and applications.

As of the first half of 2011, there were 100 million fixed users, 62.36 million mobile users (CDMA) and 61.74 million broadband users. The total assets of the group company are 632.2 billion yuan and the number of employees is 670,000. In May 2016, the first batch of "Enterprise Demonstration Bases" for entrepreneurship and entrepreneurship was launched. [1] In August, China Telecom Group Corporation was in"2016 China's Top 500 Enterprises"ranked 29th in the market.

2] On December 21, 2017, China Telecom officially issued an announcement that "China Telecom Group Corporation has completed the corporate restructuring". According to the announcement, China Telecom Group Corporation completed the corporate restructuring and went through the industrial and commercial change registration procedures at the Beijing Administration for Industry and Commerce on December 15, 2017. After the change, the enterprise type of China Telecom Group was changed from an enterprise owned by the whole people to a wholly state-owned company.

The name of the company was changed from "China Telecom Group Corporation" to "China Telecom Group ****".

The Chinese name of "Tianyi" is intuitively related to flight, wings, and sky, reflecting a free and easy mobile experience and broad coverage; "Tianyi" and "Tianyi" are homophonic, which means that users can experience mobile information services more freely and enjoy a new life of higher quality and freer information after using China Telecom's mobile services. "Tianyi" is a brand born from the development of 3G business for China Telecom, which was first endorsed by Deng Chao to promote its healthy, high-speed, convenient and wireless 3G network to the majority of mobile phone users, so as to introduce and choose CDMA2000 as the network standard of 3G network.

Telecom modems cannot be directly connected to two computers, and routers need to be used.

The first step is to connect the line according to the connection method between the router and the cat.

The second step is to enter the address you see on the router in your browser, which is usually. Then enter,Enter the corresponding account and password,Generally, the newly bought admin is confirmed to enter the operation interface。 Since the address of the fiber modem and the wireless router is the same, it will cause conflicts, so you need to modify the address of the router, set the LAN port in the network parameters to modify the IP address as shown in the figure, click Save, and restart the router.

Step 3: Click on the setup wizard, click on the next step, enter the Internet mode setting, we can see that there are three options for Internet access, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed. (It is recommended that you choose to let the router automatically choose the Internet access method) choose PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, open broadband There will be an account number with, fill in it OK. Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGN

For wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network. The next step is to set it up successfully. Click Done, and the router will automatically restart.

1 Open the webpage, enter "192 168 1 1", click "Network Parameters" in the settings window, click "LAN Port Settings", find the IP address in the options on the right, and enter "192 168 2 1".

2 Click on "Setup Wizard". Here, just like the normal router settings, set the wireless password according to the wizard and select "Dynamic IP" as the IP address, as shown in the figure below.

3.When setting up the router, many people tend to ignore the MAC address, click "Network Parameters" - MAC Address Clone", find the "currently managed PC MAC address" in the returned dialog box, and click "Clone MAC Address", as shown below.

5.Plug the optical CAT cable into the WAN port of the router based on the wiring diagram according to the wiring pattern. Open DHCP Server - >DHCP Service" as described above.

My family also directly connected two computers on the fiber optic modem, and then the first one can dial up the Internet, and the second direct broadband dial-up shows 651. My fiber optic cat is directly wireless, but wireless and I don't know what's going on, whether the mobile phone wifi or the computer is directly connected to the wireless is not on the network. However, on the second computer, if you connect to wireless first and then dial up the Internet, the second computer can access the Internet.

Hope it helps people who have the same problem.

Telecom cats do have routing functions, but they are not telecom restrictions, but to set up routes, you need to know your account password, and the manufacturer doesn't know which user to give it to when it is produced, so how to set it up, so the cats are all bridges, which is the so-called dial-up Internet.

If you can dial on the first one, the second dial is 691, just go to the business hall to open a business called multi-terminal Internet service, I don't need money here, I don't know if you have there, if not, you have to buy routing.

Welcome to the ** Little Shop (Lazy Little Monkey).

How to use the telecom porous cat box to make 2 computers go online at the same time? Need a router?

Dear, hello, I am happy to answer for you, how to use the telecom porous cat box to make 2 computers go online at the same time? Need a router? is a tool that needs to be prepared:

Computers, fiber optics. 1. Open Start. Click on the Windows logo in the bottom left corner of the screen.

Make sure you do this on the computer that shares the internet and not the one you just connected to. 2. Open the control panel. Type Control Panel, and then click Control Panel.

3. Click Network & Internet. You will find this title on the left side of the Control Panel window. 4. Click Network and Sharing Center.

It is located in the middle of the page. This will open a list of your current connections. 5. Click Change adapter settings.

You will find this option in the top left corner of the window. 6. Select Wi-Fi connection and Ethernet connection. Click on the computer icon that has "Wi-Fi" under it, then hold down the Ctrl key and click on the computer icon that has "Ethernet" under it.

7. Right-click on the Wi-Fi connection. Doing so will prompt a drop-down menu to appear. 8. Click Bridge.

It is located in the drop-down menu. After a few moments, your computer's Wi-Fi will be shared with another computer in a "bridged" way.

1 Open the webpage, enter "192 168 1 1", click "Network Parameters" in the settings window, click "LAN Port Settings", find the IP address in the options on the right, and enter "192 168 2 1".

2 Click on "Setup Wizard". Here, just like the normal router settings, set the wireless password according to the wizard and select "Dynamic IP" as the IP address, as shown in the figure below.

3.When setting up the router, many people tend to ignore the MAC address, click "Network Parameters" - MAC Address Clone", find the "currently managed PC MAC address" in the returned dialog box, and click "Clone MAC Address", as shown below.

<>5.Plug the optical CAT cable into the WAN port of the router based on the wiring diagram according to the wiring pattern. Open DHCP Server - >DHCP Service" as described above.

Enter with a super password, press the two Internet-related lines in bridge mode, and correspond to LAN 1 and 2 ports, and save them.

Connect the network cable of the modem to the router. Then the router will do the role of the branch. That's it.

It is impossible for the modem to directly connect to two computers to access the Internet at the same time, regardless of how many sockets there are in the back. Two network cable interfaces cannot be connected to two computers at the same time to dial-up the Internet. Even if you have a working router, you can't do it.

Because the router replaces the computer's broadband dial-up. Therefore, the other computer cannot be connected to the colleague. Choose a subordinate or use a router.

You can buy a wireless router, let the cat's LAN interface connect to the router's WAN interface, and then let the router's LAN interface connect to the computer. Once you've set up your router, connect a network cable from your router to your computer and you're ready to go.

The fiber-optic modem cannot access two computers at the same time, which is controlled by the operator, because the parameters of the optical modem are issued by the operator's computer room through the OLT, and now basically all operators do not allow two authentication at the same time. Therefore, the solution to the problem of multi-computer Internet access is to install a router after the optical modem, and expand the port through the router, and the connection method is as follows:

1. The optical fiber of the optical fiber to the home is connected to the optical port of the optical modem;

2. The Ethernet port of the optical modem leads out the network cable and connects to the WAN port of the router.

3. The LAN port of the router leads out the network cable and connects to each wired Internet access device.

In this way, after connecting through the router, you can make multiple Internet devices go online at the same time.