The computer can t get into the system and can t get into safe mode?

If you can't enter the safe mode, it means that either the system is seriously damaged or there is a hardware problem, if there is no important data to keep, it is recommended to reinstall the system first to see the situation, and the reinstallation of the system can be solved if there is a hardware problem, such as a bad sector of the hard disk, unstable memory, etc., there will be corresponding errors or prompts in the reinstallation.

The computer can't support entering the system, and it can't enter the safe mode, which means that the computer's system is broken.

It is possible to fix the problem by reinstalling the system. This may make it easier to solve the problem.

If that's the case, it's a problem with the system, and it's recommended that you reinstall it.

According to your situation, you can try to choose the most recent correct configuration when you boot it, if it is still not good, it is best to provide a screenshot of the phone that cannot be turned on, if there is really no way, you can consider reinstalling the system, remember to back up the desktop and my document data when reinstalling.

That's onlyRevertsystem orReloadSystem!

How should I enter the safe mode of my computer?

The computer can't enter the normal system, but it can enter the safe mode, why is this happening? Let me teach you how to solve the problem that the computer can enter the safe mode but cannot enter the normal system.

The solution that the computer can enter normal mode but the normal system can't

1. There is too much dust in the machine, and poor contact will cause a crash failure, clean the chassis, and plug all the connections tightly and firmly.

2. Plug in the memory module tightly and replace the memory that you suspect is in trouble.

3. Replace the motherboard battery and set the BIOS to factory default.

Fourth, boot to see if you can enter the system, if you can't enter, enter the security mode to delete the antivirus software. Restart to see if you can enter the system.

5. Shut down, remove the independent network card and sound card, and turn on the computer to see if it can enter the system normally.

Sixth, none of the above, get a good system disc reinstallation system.

How to put your computer into safe mode

1. If you can't enter the normal system, after booting, you can go to the system options interface, directly press F8 to enter the safe mode, if you want to enter the safe mode in the normal system, you can first select "Run" in the start menu.

2, then enter the command msconfig in the run window, and press OK.

3. Enter the system configuration utility window, and the first thing you see should be the "Normal Boot" item.

4. You need to change it to the "Diagnostic Startup" item, and then press the "Apply" button.

5. When you press "Apply", an error will be prompted, leave it alone, press "OK", and then press the "Close" button.

6. At this time, an information box will pop up, prompting that restart can make the settings take effect, press OK, and it will automatically restart immediately.

7. After restarting, when entering the system options, press the F8 key immediately to enter the "Advanced Options".

8. In the "Advanced Boot Options" window, select "Safe Mode".

9. Booting the safe mode will take a little longer than the boot time of the normal mode, wait a little bit, and it will enter the safe mode. The operation in safe mode is the same as the operation in normal mode, but with fewer features.

1.How to solve the problem that the computer cannot enter safe mode.

2.How to solve the problem that the computer can't get into the system.

3.How to enter the computer with network security mode.

4.What to do if the computer can't enter safe mode.

5.How to solve win7 system can not enter safe mode.