The USB flash drive image ISO file starts abnormally

Generally, the U disk does not support multiple boot ISO, that is, the ISO with a selection menu, unless the ISO is written to the USB flash drive in mass production, the USB flash drive only supports a single boot ISO

1. ISO is a disc image file, which is not suitable for creating on a USB flash drive.

2. After being reluctantly created on a USB flash drive, some computer boot files may not be recognized normally.

3. The file creation method of CD-ROM and USB flash drive is different.

4. It is recommended to burn the ISO file to a disc (most notebook optical drives now have a burning function), and then use it to boot the computer, reinstall the system, etc.

USB flash drive only supports a single boot ISO

To make a boot disk, it is recommended to use "U Hero Maker" to make a PE boot disk with one click.

After making it, copy the ISO image file to the GHO folder of the USB flash drive.

Enter the BIOS to set the U disk to start first, and you can install the system with one click by booting into the PE system from the U disk.

It may not be possible to fully start, but it may not all work well.

Mainly due to the following reasons:

1. The USB flash drive does not support ISO image files well, or the storage space of the USB flash drive is relatively small, which is not enough to store ISO images.

It is recommended to replace the 8G USB flash drive and remake it.

Second, the production software is immature.

Remastered with mature, stable software.

3. It is recommended to start the USB flash drive. Make it with special software, and then copy the core files in the disc image to a USB flash drive, and you're good to go. For example, it is enough to copy only the GHO file and the hard disk installer in the disc file.

On the one hand, the disc image file is updated at any time, and every time the update is made, the boot USB flash drive will cause great damage to the USB flash drive.

On the other hand, this kind of processing not only has a strong maintenance function when starting the USB flash drive, but also has a relatively low error rate.

Take Chinese cabbage U disk as an example to illustrate the specific operation process:

First, make a boot USB flash drive. Take the Chinese cabbage U disk system as an example. There is also a deep USB flash drive system and so on.

Third, install the recovery system.

Insert the USB flash drive into the computer where you want to install the system, turn it on, keep pressing F12, and then select the USB flash drive drive.

After startup, run the hard disk installer or ghost image installer in the USB flash drive, automatically identify the backup GHO file, select Restore, and you're good to go.

If the system can boot normally, only do the first.

The second and third steps are OK.

U disk can be used U hero production tool,One-click to make a startup disk,After making it, copy the ISO image to the GHO folder of the U disk,Enter the PE system to install the system with one click。