Golf 7 prompts what to do if the brake system fails

The Golf 7 car indicates that the cause of the brake system failure is the situation caused by the failure of the car's brake pads.

The solution is: if it is caused by excessive wear and tear of the brake pads of the car, you need to go to the 4S shop or repair shop of the car in time to replace the brake pads of the car to solve the problem of brake system failure.

There is also a possible reason for the lack of brake fluid will seriously affect the braking effect of the car, make the brake softer, the braking distance longer, and in serious cases, the brake line will enter the air, resulting in brake failure. The lack of brake fluid may lead to oil leakage problems such as brake oil pots, master cylinders, sub-cylinders, and pipeline wear, because in the case of no oil leakage, brake oil is often not missing much in a maintenance cycle.

If the braking system is faulty, it is recommended to go to 4S for maintenance in time;

Top 10 failures and causes of automobile braking system:

1. Fault phenomenon: step on the brake pedal, the pedal does not rise, and there is no resistance;

Determine the cause: check whether the brake fluid is missing; Whether there is oil leakage at the brake cylinder, pipeline and joint; whether the parts of the main pump and sub-pump are damaged;

2. Fault phenomenon: the brake pedal is pressed to the end, and the braking effect is not good; Continuous braking, the effect is not improved, and the pedal is gradually raised;

Determine the reason: there is gas mixed in the braking system;

3. Fault phenomenon: continuously step on the brake, the pedal return is raised, and the braking effect is improved;

Determine the reason: the gap between the friction pad and the brake drum is too large;

4. Fault phenomenon: continuously step on the brake, the pedal position rises, and there is a sinking feeling;

Determine the cause: oil leakage;

5. Fault phenomenon: the pedal position is very low; If you step on it again, the position cannot be raised, and it feels hard;

Determine the cause: the main pump is blocked;

6. Fault phenomenon: the pedal height is normal, not soft or sinking, but the braking effect is not good;

Determine the reason: the gap between the friction pad and the brake drum is too large or there is oil stain;

7. Fault phenomenon: brake deviation;

Judgment reason: the car deviates to the left, then the right wheel brake is ineffective, and vice versa;

8. Fault phenomenon: the car travels for a certain mileage, and the brake drum (disc) heats up;

Determine the reason: check the brake master cylinder, brake cylinder or pipeline;

9. Fault phenomenon: the free stroke of the brake pedal is too small;

Judgment reason: needs to be adjusted;

10. Fault phenomenon: the brake fluid level rises slowly;

Judgment reason: Loosen the deflating screw and observe the return of the brake shoe. If the brake shoe returns, the oil pipe should be dredged; If the brake shoe does not return, the brake cylinder should be disassembled and checked.

Automatic parking. There are probably several reasons for the failure of the system: the electronic parking brake.

There is a problem、Brake pads。

Wear and tear, problems with electronic systems, problems with battery power.

There are several workarounds:

1. Reset the electronic parking, turn on the car key, then step on the foot brake, then press and hold the electronic parking brake down for five seconds, and then pull the electronic parking brake upward for five seconds, so that the electronic parking brake is initialized and reset.

2. Parking brake.

It usually refers to the manual brake installed by a motor vehicle, referred to as the handbrake. The common handbrake is generally placed in the driver's right hand in a down-hanging position for easy use.

3. The function of the parking brake is to stabilize the vehicle after the vehicle is stopped, so as to avoid accidents caused by slipping when the vehicle is parked on the slope road.

4. Some automatic transmissions on the market.

The models are designed with a strangulation similar to the first kill on the outside of the driver's left foot, and some advanced models are also equipped with an electronic parking brake system.

The failure of the brake assist system is the failure of the brake assist system, and if the brake assist system fails, then it will feel heavier when the brakes are applied.

Brake booster is a brake round liquid starter booster device widely used from light vehicles to medium-sized automobiles, which can be roughly divided into vacuum assist, hydraulic power assist and pneumatic power assist.

Hydraulic cylinders included.

The support arm, the pressure arm and the brake plate are characterized in that the hydraulic rods at both ends of the hydraulic cylinder are connected with the support arm and the pressure arm, and the brake plate with rubber wheels is arranged on the pressure arm.

You have a lot of fault displays on the Bi Tan Lap meter, whether the vehicle is undervoltage or power off. There will be a lot of fault codes. It is necessary to slide the instrument by hand to delete the fault code, read the fault code when restarting the vehicle, and analyze the fault code.

The Golf Seven Brake Booster System fails, and this should be solved by the relevant tournament store.

Hello, if the automatic registration system fails, you must go to the repair shop to read the specific fault ** with a decoder, and then repair it according to the fault ** prompt, which is generally caused by the damage of the sub-pump.

Specifically, you still need to use a diagnostic computer to see if there are any related faults in the automatic parking system**? Let's see if there is a fault in the motor or the switch itself? If there is a problem, it needs to be replaced.

Hello, in this case, you can drive the car to the 4S shop, diagnose it with the computer, see if it is caused by **, and then repair it.

Hello, it is recommended that you go to the 4S shop to find a professional maintenance master to test it with a computer, and then repair it if you are sure!

Hello, this problem is recommended to go to the 4S shop or repair shop, use the computer to diagnose the specific fault code, and solve it in a targeted manner

In this case, you can drive the car to the 4S shop, diagnose it with a computer, determine the cause of the failure and then repair it.

Hello, in this case, you can go to the local four-S store to test it with a computer to see what the specific problem is?

Hello, this needs to go to the local 4S store computer to detect the specific situation, and deal with it according to the actual fault

Hello, in this case, it is recommended that you go to the SSSS store to check to see what the fault is caused by, and then troubleshoot it.

If this situation occurs, the owners can't solve it by themselves, and they need to go to the 4S shop for maintenance. Electronic smart parking is an electronic parking brake, and many mid-size and compact cars will be equipped with an electronic parking brake system. The electronic handbrake is not the same as the traditional mechanical handbrake.

The function of electronic parking is to accompany the bridge to temporarily park on the stop-and-go road section. For example, if there is a red light ahead, stop at this time, and after releasing the brake pedal, the automatic parking will quietly start, lock the wheels, until the accelerator pedal is pressed again, and the electronic parking will automatically unlock the wheels, and the action is very fast, much shorter than the time of pressing the electronic parking brake.

In addition to being easy to use, electronic parking can also prevent slippage, because the electronic parking function is developed through the ESP module, during the parking process, the ECU will judge the levelness of the body and the torque required for wheel braking through sensors installed in the car, so as to decide whether to apply braking to prevent rolling. Moreover, the braking force exerted by the wheels of the electronic parking horse is not very large, and it is good to prevent the wheels from moving, so that when you step on the accelerator again, the vehicle will not jump forward. However, after the vehicle is parked for more than a certain period of time, the electronic parking will turn on the electronic parking brake, and when the vehicle moves forward again, the electronic system will judge whether to release the brake according to the accelerator pedal pressure and the travel of the clutch pedal of the manual transmission model.

Photo by Lu Liting of Pacific Automobile Network).

Summary. Hello! We're glad to answer your questions!

Golf 7 refers to the 7th generation of Golf. On December 10, 2013, FAW-Volkswagen's all-new Golf 7 was officially launched in Guangzhou. Volkswagen launched the first generation of the Golf in 1974 and has undergone seven generations so far.

The 1st to 7th generations of the Golf are a model that is constantly updated from the old to the new. Each generation has a relatively large difference in appearance. Domestic FAW-Volkswagen introduced the fourth-generation Golf to China in July 03 and the sixth-generation Golf in October 09.

Hello! We're glad to answer your questions! The Golf 7 shifts without releasing the brakes to report a fault transmission is 1

Oil leakage, late shifting. 2.Shift abrupt frustration die pin, impact.

Changyou 4Reverse shock, abnormal noise. 5.

The gearbox overheats and shifts poorly.

Hello! We're glad to answer your questions! Disturbing Beam Golf Elimination 7 refers to the 7th generation of Golf.

On December 10, 2013, FAW-Volkswagen's all-new Golf 7 was officially launched in Guangzhou. Volkswagen launched the first generation of the Golf in 1974 and has undergone seven generations so far. The 1st to 7th generations of the Golf are a model that is constantly updated from the old to the new Li Slip.

Each generation has a relatively large difference in appearance. Domestic FAW-Volkswagen introduced the fourth-generation Golf to China in July 03 and the sixth-generation Golf in October 09.

Summary. The brake priority function of the Volkswagen Golf 6 means that when the accelerator pedal and brake pedal are pressed at the same time, the vehicle will give priority to responding to the brakes to ensure driving safety. If the brake priority function is triggered for no reason, it may affect the driving experience and safety of the vehicle.

Here are some possible workarounds:1Check the braking system:

The failure of the brake priority function may be caused by the failure of the braking system, and it is necessary to check whether the brake disc, brake pads, brake fluid and other components are normal. 2.Check the accelerator pedal and brake pedal:

Brake priority function failures can also be caused by damage or misalignment of the accelerator pedal or brake pedal, and the status of these pedals needs to be checked. 3.Recalibrate the brake priority function:

If none of the above methods can solve the problem, you can try to recalibrate the brake priority function, please refer to the vehicle's manual or consult a professional technician for specific operations. If none of the above methods can solve the problem, it is recommended to go to a professional repair shop or 4S shop as soon as possible to check and repair the vehicle to ensure driving safety.

Here are possible solutions.

I'm still a little confused, can you be more detailed?

The brake priority function of the Volkswagen Golf 6 means that when the accelerator pedal and brake pedal are pressed at the same time, the vehicle will give priority to responding to the brakes to ensure driving safety. If the brake priority function is triggered for no reason, it may affect the driving experience and safety of the vehicle. Here are some possible workarounds:

1.Check the braking system: The failure of the brake priority function may be caused by the failure of the braking system, and it is necessary to check whether the brake disc, brake pads, brake fluid and other components are normal.

2.Check the accelerator pedal and brake pedal: Brake priority function failure can also be caused by damage or misalignment of the accelerator pedal or brake brake pedal, and the status of these pedals needs to be checked.

3.Recalibrate the brake priority function: If the above methods do not solve the problem, you can try to recalibrate the brake priority function, please refer to the vehicle's manual or consult a professional technician for specific operations.

If none of the above methods can solve the problem, it is recommended to go to a professional repair shop or Shanshi's 4S shop as soon as possible to inspect and repair the vehicle to ensure driving safety.