My ATI graphics card driver doesn t have a control center after it is installed

The driving angel will not ** control the center, what system are you, the driving angel will generally be updated to the latest, you determine the driver version, and the control center is consistent. Drive Home can ** Chinese version of the control center.

Install it first before installing, otherwise the control center will not be opened.

Prevent Baidu from auditing, and remove the words in parentheses yourself.

XP. ht (囧.

vistah (囧.

1. Is there no ATI graphics card control panel in the right mouse button?

2. Go to the Sapphire official ** to find your graphics card driver, it's better to use the official one, the driver angel just drives a driver similar to your graphics card chip, and it's not very right.

Blaupunkt Official**:

Right-click on "Configure Interchangeable Graphics Card" in the blank space of the desktop to bring up the ATI graphics controller (same as AMD graphics card control center).

The specific steps are as follows:

In the blank space of your computer's desktop, right-click and an option box will pop up, find and click on the "Configure Interchangeable Graphics Card" option in the option box.

Then you can open the ATI graphics controller (the same as the AMD graphics card control center), and you can set up the graphics card in the controller.

Summary. Hello dear, 1. Confirm whether the current graphics card is installed correctly, check whether the driver software is installed correctly, and install it according to your own driver software or the corresponding driver. 2. In the software in the control panel, see if the ATI control center crashes or is not installed normally, if it is not installed normally, you can reinstall it by yourself, or you can uninstall the corresponding program and reinstall the latest program.

3. If the above method still can't solve the ATI control center startup problem, you can search for and install the corresponding fix on the ATI official ** to match and repair, and finally solve the problem that ATI control center can't start.

Hello dear, 1. Confirm whether the current graphics card is installed correctly, check whether the driver software is installed correctly, and you can install it according to your own driver software or the corresponding driver. 2. In the software in the control panel, see if the ATI control center crashes or is not installed normally, if it is not installed normally, you can reinstall it by yourself, or you can uninstall the corresponding program and reinstall the latest program. 3. If the above method still can't solve the ATI control center startup problem, you can search for and install the corresponding repair patch on the pure source difference ATI official **, match the repair, and finally solve the problem that the ATI control center cannot start.

It is also possible that the control center program version of lz is inconsistent with the driver version of Xi Zhenghe,For example, lz is the driver of the version,Then you must also use the control center of the version,Otherwise, this problem will roll,The solution is to go to the Internet to find two drivers and consoles of the same version of the staring book to try it。

Win7 method of installing ATI graphics card control center:

After upgrading the graphics card driver to the latest version, the graphics card control center will be displayed.

2. Open the drive life, click the local drive;

3. Select the corresponding graphics card and click Update;

4. Restart the computer;

6. Enter the graphics card control center interface.

Go to the AMD (ATI) official website and the next CCC graphics controller will be available.

1. Install the ATI driver.

2. After installing the ATI control panel, you can click the right mouse button and select the ATI Catalyst(R) Control Center in the pop-up frame to open it, or you can select the ATI control panel in the lower right corner of the window.

First of all, you have to install the driver, and there will be ATI control software in the complete driver, and you can see it when you install it.

Depending on what system you have, find it yourself.

Right-click "Configure Swappable Graphics Card" where there is an empty space on the desktop, and the ATI graphics card controller will appear, which is the AMD graphics card control center.

In the blank space of the computer desktop, right-click the mouse, and in the pop-up options, click "Configure Interchangeable Display Card".

The ATI graphics controller will be opened, and the graphics card settings will be set up in it.

Right-click on "Configure Swappable Graphics Card" in the blank space of the desktop to enter the ATI graphics card control center.

Here are the steps to access the ATI graphics card control center and switch graphics cards

Right-click on the blank space of the computer desktop and select "Configure Interchangeable Graphics Card" or select the settings in the graphics card properties. To draw inferences, just go to the graphics card swap settings options screen.

Click "Configure Swappable Graphics Card", and select the graphics processing unit: high-performance GPU in the toggle graphics card settings on the pop-up interface. Click the "Apply" button below and you're good to go. This setting has already been switched to the discrete graphics card.

After setting it, open it again and you will find that the currently active graphics processing unit is: high-performance GPU.

If you play a game, watch a movie, need to work, or use the built-in battery of your laptop to save power, you can switch back to the integrated graphics card and select "Power Saving GPU".

Right-click is not caused by the driver not being installed correctly after reinstalling the graphics driver.

Normally, if we install the graphics card driver in the windwos10 system, then the computer will appear with the control panel of the corresponding brand graphics card. However, recently some users have reported that in the win10 system, the graphics card control panel is missing, resulting in the inability to set the performance of the graphics card, what should I do? Actually, we only need to reinstall the graphics card driver once to solve the problem.

Now, let's take a look at the specific steps!

Recommended:

The steps are as follows:

1. First of all, go to the Internet** and install the "360 Driver Master", if the 360 Security Guard is installed in the computer, you can open the 360 Security Guard-More-Driver Master, you can install it;

2. In the "360 Driver Master" driver installation interface, you will search for "graphics card", and then click "Install" or "Upgrade" at the back, and so on 360 Driver Master automatically ** and install it to solve the problem.

3. Remember to restart the computer after the driver installation is completed.

The above is the solution to the problem of the loss of the ATI graphics card control panel under the Windows10 system. If you are in the process of using win10 system, you have encountered a similar situation, you may wish to try the solution.

Method 1. 1. First, right-click (computer) and click (Properties).

2. Find (Device Manager) on the left side of the display page, then select the display card at the bottom of the right border, right-click the display card bar, and then click (Update Driver).

4The driver will be installed automatically until the Hardware Update Complete Wizard box is displayed. Click (Done). This is the end of the update.

Method two. 1.The above method is more cumbersome, and it is very convenient to update the driver by using the driver wizard software. First, open the installed Driver Wizard program.

2.In the Driver Wizard interface, the program will automatically connect to the Internet to check whether all drivers of the machine are missing and available updates. In the check that the available update graphics card driver item is displayed, click (Upgrade).

4.At this time, the installer interface will pop up to install it accordingly. Finally, click (Done) and restart your computer to update the graphics card driver.