How to clean up the garbage in the cracks of the sliding windows

This question is not difficult! Use a brush and brush the kind of paint that is a little harder.

Wipe with a damp cloth.

Don't flush it with water, or it will get dirty everywhere.

I use a vacuum cleaner, and you can also cut a piece of plastic that is the same width to shovel the garbage.

Is there a thick layer of dust in the cracks of doors and windows that is difficult to clean? Today I will teach you a trick to clean the gaps of doors and windows, and you can also clean the dead corners of doors and windows when you learn this trick!

Tips for cleaning stains in the cracks between doors and windows

Start with a dish pad, a utility knife and a marker. Then press the dish cotton against the gaps between the doors and windows, and use a marker pen to draw the size of the track between the doors and windows. Next, use a utility knife to cut off the newly marked dish washcloth.

Finally, put the dish cotton in the water and wash it, and then put it on the cracks of the doors and windows to brush back and forth to easily remove the stains in the cracks of the doors and windows.

After reading this life tip, are you still worried about whether the cracks between the doors and windows are clean? Don't worry, in addition to this little tip, I recommend two more cleaning utilities to you, I believe you will use them in daily life.

1. Crevice brush

When we clean doors and windows, some dead corners are particularly difficult to clean, but we can use this kind of brush that specializes in brushing gaps, which is a nylon brush, and can also clean the hard dirt of the floor glue at the back, which is more convenient and practical to clean.

2. Clean the mud

Although it is said to clean the keyboard, but the effect of using it to clean the dust and sand in the gaps of doors and windows is also quite good, which needs to be pasted on the dead corners of the gaps between doors and windows, and you will find a lot of sand and dust on it when you tear it off, which is convenient and practical.

3. Edible white vinegar

If the doors and windows at home are made of steel plastic, then we must not use detergents and strong acid products to clean, because that will corrode the doors and windows, if you want to clean you can use white vinegar as cleaning supplies, we pour some white vinegar on the gaps between the doors and windows, so that the dust is easy to be taken out, and then wiped clean, and the doors and windows will look new in an instant.

4. Paint brush

Many of you will have a paint brush at home, at this time we need its help, there are often some sand in the gaps that cannot be cleaned with a rag at all, and we can use a brush to concentrate these sand, because the brush hair is relatively fine, just enough to take into account the corners and corners, even the dust in the small gaps can be easily cleaned up.

Friends who love cleanliness should try it now!

The following methods can be used to clean up the garbage in the dead corners of doors and windows:

Use a vacuum cleaner: Equip the vacuum cleaner with a narrow-slit nozzle and place it in the dead corner of the door and window to suck up trash and dust. The suction power of the vacuum cleaner can effectively remove smaller trash particles.

Use a brush or brush head: Choose a brush or brush head that is slender and soft, insert it into the crevices, and brush back and forth to remove trash. Make sure the bristles of the brush do not damage the surface of the doors and windows.

Use a cotton swab or toothpick: For smaller crevices or dead spots, a cotton swab or toothpick can be used to clean up. Dampen a cotton swab or toothpick and carefully insert it into the crevice, gently wiping and removing trash.

Use a hair dryer: If there is lighter trash, such as dust or fine paper scraps, in the cracks between doors and windows, you can use a hair dryer to blow them away. Turn the hair dryer to low and aim it at the gap to blow the garbage out.

Use a detergent: For more stubborn dirt or sticky garbage, you can use a proper detergent. Spray the cleaner on a cotton swab or brush and use them to clean the gaps. Make sure that the cleaner you use is appropriate for the material of the door or window, and follow the instructions for using the cleaner.

Make sure the surfaces of windows and doors are dry before cleaning up so that trash doesn't make it harder to remove. In addition, regular cleaning of the cracks between doors and windows can prevent the accumulation of dust and dirt, and keep doors and windows clean and in good condition.

Cracks in the door can be cleaned with a small brush.

Use a special small brush to brush it out.

1. It can be seen that all kinds of dust will often accumulate in the grooves of the window, and it will be difficult to clean it directly. Let's make a very useful tool to clean the dust in the recesses of the windows.

2. Find a large beverage bottle, then use a knife to cut the beverage bottle in the middle, and take half of the bottle spout for the next use.

3. Prepare the hair dryer for our daily hair drying, pay attention, we are using the back of the hair dryer, in fact, after turning on the hair dryer, the back of the hair dryer will produce a suction.

4. Then we cover the back of the hair dryer with a towel, the purpose of this is to prevent dust from entering the hair dryer.

5. Then cover the top half of the drink bottle that you just opened on top of the towel, and such a simple vacuum cleaner is ready.

6. You can directly go to the groove of the window to suck out the dust directly, and because the bottle mouth is relatively small, it can be placed in the groove.

7. The dust sucked out of the window groove can be directly put into the trash can, and it can be seen that the simple vacuum cleaner is very easy to use.

8. Of course, if you have a vacuum cleaner at home, you can use the vacuum cleaner directly, if not, you can make a simple one yourself, I hope it can help everyone.

How to clean the window slot, look at the circle friends' tips, which trick is better!

The garbage in the window slot can be blown out with a hair dryer first, and then the garbage that cannot be blown out can be pasted out with tape, and finally wiped clean with a wet handkerchief.

You can use a small vacuum cleaner, or remove the head of a large vacuum cleaner and use the tube of the vacuum cleaner directly. If you can't suck out the relatively small dust, you can wipe it with a rag.

With a vacuum cleaner, the suction power of the vacuum cleaner is very large, and it can suck out all the garbage in the trough.

It is recommended to clean it with a small brush and a small shovel. Or use a sponge cloth to cut the same size of the window slot with a knife and clean it with a sponge cloth.

Is it difficult to clean the window groove when cleaning at the end of the year? Teach you a little trick to clean up the dead spots.