Samsung 9158V can t turn on, what s going on

There are many factors why Samsung i9158V mobile phones cannot be turned on, and the battery, mobile phone software, and hardware will cause this kind of non-boot failure. We recommend trying the following:

1. Replace a mobile phone battery of the same model for testing or send the battery to the nearest service center for testing.

2. Take out the battery, clean the metal contacts of the battery with a rubber and test.

3. Take out the SIM card and SD card at the same time, and then press the power button for more than 10 seconds to test whether it can be turned on.

If it still can't be turned on, there may be a problem with the system program or hardware, it is recommended to send the phone to the nearest Samsung service center for testing.

There are several reasons why your phone won't turn on:

1. Use a data cable to connect to the computer and charge for 30 minutes (it may enter a sleep state due to the power running out, and it needs to be activated).

2. Press and hold the power button for about 10 seconds to try to turn it on.

3. Replace the battery and eliminate the battery fault.

4. Eliminate the system cause and use factory reset to see.

5. Eliminate the charging cable and charging plug, and change to other accessories.

6. To eliminate whether the interface between the battery and the mobile phone is loose, you can disassemble the battery to see if there are foreign objects in the interface between the battery and the mobile phone.

7. If none of the above operations can be turned on, it is recommended to send the mobile phone to a nearby after-sales outlet for maintenance and testing.

Samsung Galaxy Mega Plus i9158P freezes and won't turn on.

We recommend that you try it by following these steps:

The device is fully charged, and the data is backed up in the (off) state.

Press and hold the [Power Key] and [Volume +] keys for 10 seconds. After entering recovery mode.

Operation 2-wipes

Select Wipe Data Factory Reset;

Select Wipe Cache Partition

Select the reboot system now operation and reboot to complete the repair.

If the problem persists after 2-wipes, it is recommended to press and hold the [Power Button] and [Volume-] buttons for 10 seconds.

Go to downloading mode and connect to your PC. Brush the official ROM repair system with Odin.

1: The phone is completely powered off first, and then press and hold the volume down button + home button + power button of the phone at the same time, wait for 3 seconds, and the English interface will appear.

2: Then press the volume up button again, enter the interface for the green robot, this is the flash mode, the above picture is the selection method of the all-in-one package.

The image above shows how the Odin tool selects a five-piece set of files.

5: Once everything is selected, click Start to start swiping.

6: After brushing, the word "pass" will be displayed on it, which means that the brushing has been successful.

7: The phone restarts, the first boot may be very slow, please wait patiently. At this point, the line is brushed.

The Samsung 9158P brick saving tutorial is over. Brushing the line of the mobile phone can also be said to be a brick-saving behavior. Because the line brush can solve the situation that the mobile phone cannot be turned on.

Note: Flashing is risky and should be done with caution