What is the reason why iPhone5s won t charge?

There are several ways to try it after you plug in the power supply power button and add the home button and press and hold it and then release the home button to see if it can be turned on If not, you try again Put the phone in a warmer place when charging Let the body temperature rise for a while Charge it for a while and try.

If it doesn't work, then it's probably a hardware problem, find after-sales.

Check whether the charging port and charger are disconnected well, or try a different charger.

First, check whether the charging port at the bottom of the iphone5s is in good contact with the data cable, if the contact is not good, it will not be able to charge.

Check if there is any foreign object in the bottom interface of the phone, resulting in poor contact with the data cable.

Try to replace the cable or charger, it may be a fault of the cable or charger, replace them separately to identify what the problem is.

If you have tried the above methods and still don't work, it is recommended to turn off the phone and turn it on again. Sometimes the iPhone5s system itself is messed up, which may also cause it to fail to charge.

Mine too, remember not to run out of power in the future, unplug the power supply on the connection, and charge it yourself after a long time, I thought it was broken before, nothing happened. Remember to point out thank you;

I'm also this problem, did you solve it?

The problem of the power bank, the second is the problem of the charger, and the third is that the configuration of the mobile phone is not good.

The common reasons and solutions for Apple mobile phones not charging are as follows:

1. If the charger is broken, repair or replace it with a new one.

2. The charging data cable is broken, and the original data cable is replaced with a new one.

3. If the mains power is out of power, wait for the mains to be normal before charging.

4. The charging interface of the mobile phone is broken, and the charging interface is repaired or replaced by Zheng Hong.

5. The power management circuit of the mobile phone is faulty, and the mobile phone is repaired.

6. The battery is broken and cannot be charged, replace the battery with a new one.

iPhone Reboot Tips:

1. Press the home button and hold it for 6-8 seconds to exit any program that can get your iPhone stuck.

2. Try to press and hold the power on and off button, if it can be restarted, it is best.

3. If that doesn't work, try pressing the home and Hugh Shouting wake-up button at the same time, and hold it for about 10 seconds to force it to shut down.

4. If the above methods don't work, you can try to connect to the computer and use the "Restart" function in third-party tools such as PP Assistant and iTools.

First, shut down and restart to see if it can be solved.

If you can't solve it, you can brush it, and if you can't solve it, you can only send it to after-sales.

Flashing steps: 1. The mobile phone enters DFU mode, and the steps are turned on, and the computer is connected with a data cable.

Press the power off button for 2 seconds; Then, press and hold the power off button and the home button at the same time for 8 10 seconds; Finally, keep holding the home button for 15 seconds.

2. Check whether you have entered DFU mode correctly: In DFU mode, the phone is black. If it doesn't work, redo the first step.

3. After entering the DFU state, iTunes checks the iPhone in a recovery state, and you can see that there is a recovery button, at this time, hold down the shift key of the keyboard, and then click the left mouse button"Recovery", A window appears, find the path of the firmware, and then double-click the good firmware, and then iTunes will automatically recover, don't pull out the data cable during the process, don't move the iPhone, just wait quietly.

4. A window will pop up after iTunes recovery is completed"Your iPhone has been restored, and the window will automatically close after 10 seconds", close this window, and then unplug the data cable, do not use the computer to activate the iPhone, activate the system on the mobile phone will be purer.

Hello,If the phone is out of power now, you need to use the original charger to charge it for 30 minutes and then turn it on.,If the power is sufficient, please try to enter the engineering mode to clean up and high cache and then restart it.。 How to clean the cache: When the phone is turned off, press and hold the power rock hand source key and the volume down button at the same time to enter the project mode, select the clear cache option through the volume button, and the system will automatically clean the cache for you.

After clearing the cache, select Restart to see if the computer can boot normally. If you can't enter the engineering mode, you can bring your mobile phone, warranty card, and invoice to the local customer service center, and the staff will help you check your mobile phone and then provide you with help.

1. If you find that there is no electricity when charging, first check whether the charging interface and the charger are well discharged, then of course, if the contact is not good, it will definitely not be charged.

2. If there is no above situation, then see if there is anything blocked in the mobile phone interface, which is also the reason why it cannot be charged.

3 There is also a situation that is relatively small, that is, the temperature may not be enough. The solution is to switch to a place with a higher temperature to charge.

4. If you encounter this situation at this time, then change the data cable or change the charger, maybe the problem lies with them, not the problem of the mobile phone itself.

5Try to reboot, sometimes because the phone's own system will be chaotic.

6The reason why it is mentioned above may be related to temperature is because the battery of the iPhone is more sensitive to temperature, so it will be better to put it in a place with a higher temperature.

7. If there are no problems above, it should be a hardware problem with the mobile phone, and you should go to a repair shop for professional repair.

iphone5s change screen.

The iPhone has a small connector in the case, and you can find a cable that can be connected to it and plug it in. This method can be used for a long time, which may not be good. Give me !!

There are several ways to try it after you plug in the power supply power button and add the home button and press and hold it and then release the home button to see if it can be turned on If not, you try again Put the phone in a warmer place when charging Let the body temperature rise for a while Charge it for a while and try.

If it doesn't work, then it's probably a hardware problem, find after-sales.