How to drive an automatic car d stands for what it means

D (drive): Forward gear, used for general road driving. Due to the different designs of the models in different countries; Therefore, the "D" gear generally includes from 1st gear to high gear or 2nd gear to high gear, and will automatically change gears due to changes in vehicle speed and load.

By placing the paddle lever in "D" gear, the driver can control the speed of the car as long as the accelerator pedal is controlled.

d is the automatic transmission car forward gear, hang up and step on the accelerator, hope the best, thank you.

n is neutral, p is to stop and turn off, d is automatic transmission, that is, used when walking, and d1d2 is used for climbing in first and second gear.

There are six gears on a general automatic transmission car, from top to bottom: P, R, N, D, 2, and L.

P - Parking, Parking, Starter Gear. When you don't use the park, the gear is here, and the wheels are in a mechanical locking state to prevent slipping.

r - reverse, reverse. Used when reversing.

n - neutral, neutral. When stopping temporarily (e.g. at a red light), use this gear. Note that this gear indicates neutral gear, and to prevent the vehicle from slipping on slopes, be sure to apply the brakes.

D - drive, forward gear, also known as drive gear. Needless to say, when moving forward, use this gear.

L-Low, low gear. When going down a hill or going down a long-distance slope, hang the gear here, which can limit the gear of the car to automatically only be in the lowest gear (equivalent to the first gear of the manual transmission car), which can make the car use engine power to brake when going downhill, and the driver does not need to step on the brakes for a long time to cause the brake pads to overheat and cause danger.

If it's good, please order.

The + and - symbols in the D gear are generally found in automatic manual transmissions.

Above, the characteristic of this gearbox is that in addition to the automatic control of the computer.

In addition to the gears, there is also a manual mode where the desired gear is manually selected.

This automatic manual transmission is generally born to increase driving pleasure and sportiness, and the driver can choose the timing of the shift according to the speed in manual mode, the advantage is that this manual shift does not need to be clutched, and at the same time increases the playability.

AutomaticD or D- stands for Downshift, which allows high-performance sports cars to be free from the constraints of traditional automatic transmissions, allowing drivers to enjoy manual gear shifting.

This type of car is in its gear.

There is a "+" to select gear. In D gear, you can freely change downshifts (-) or upshifts (+) as in manual gears.

The "+" and "-" shift buttons have been added, so that the driver can increase and decrease gears without taking his hands off the steering wheel.

Some gears such as 1, 2, 3, 4, etc., whose function is to limit the automatic transmission.

In order to achieve the purpose of continuous increase in engine speed, it is conducive to the output of engine power and torque.

When the manual transmission mode, the vehicle will have D1 D2 D3 three kinds of limiting gear, if in the process of driving, through some more complex places on the road, you can switch to the manual transmission, with the manual transmission is more convenient.

If there is a slope, the vehicle can switch to manual transmission and hang the gear in D3 or D2 gear, then the vehicle will have more power and the speed will be limited to these two gears.

However, if the slope is steep, you can hang the gear in 1st gear, and you can also hang the gear in these two gears when you break down, and for the vehicle, hanging in these two gears will reduce the brake pads.

The degree of wear and tear will also reduce the probability of accidents of the vehicle, and it can also control the speed of the vehicle, and the driving will be safer.

And the "+" sign refers to the plus gear, you can also use this when going uphill and downhill, when you go uphill, you will find that when you hang this gear, there will be a gear in use, and the number of this gear can be seen on the dial.

When driving in gear, you can hold down the gear lever and push it to the right into the D+ D- position, at this time the gear lever is between D+ and D-, and then press and hold forward (D+) or pull back (D-) once, which means that one gear is increased or lowered.

D gear is the manual transmission mode of the automatic transmission car, pushing up is to increase the gear, and pushing down is to reduce the gear, but since I bought the automatic transmission of the car, the D gear is basically useless, because the fuel consumption is about the same.

D gear is the direct forward driving gear, the general normal road driving is the use of D gear, S gear is the sports gear, is the use of forced increase in engine speed to reduce the gear, to achieve the power output of large torque, in order to achieve the purpose of instantaneous acceleration, the fuel consumption in the S gear mode is much higher than the D gear mode. Hope it helps, I wish you a pleasant stay.

This is manual mode, when driving in D gear, you can press and hold the gear lever to the right to push into the D+ D-position, at this time the gear lever is between D+ and D-, and then press and hold forward (D+) once or pull back (D-) once, it means that a gear is increased or lowered (the instrument panel has a digital display gear), which can be continuously increased or decreased. Unlike some cars, the gear lever automatically springs back to the middle position between D+ and D- after each upshift or decrease, and the gear lever does not stay in the D+ and D- positions. When you want to return to Auto mode, just press and hold the gear lever and push it directly to the left to the D gear (the instrument panel will automatically switch to Auto mode).

Buy the car and study the instructions more!

Some automatic transmission cars will be marked with a plus sign and a minus sign next to the D gear, and people who can't drive will be very puzzled, what does this plus and minus mean and how to use it? Let's take a look.

The +-gear on the right side of the D gear of the automatic transmission means to reduce the speed and increase the output torque of the transmission, which is generally used on downhill or uphill slopes. This is because if you go uphill in D mode, the gear will automatically increase as the rev increases. The faster the gearbox, the lower the torque output, and if you need enough torque output to tow the car uphill, you must lock the gearbox within a certain speed range, and achieve the effect through this concentration of energy.

In the case of AT or CVT, if you put it in the "D" range, it will automatically switch from 1st gear to 2nd gear depending on the speed and engine speed. And the speed is changed by a belt or chain, so the speed is smoother and smoother. The AT and CVT have the function of shifting gears by detecting accelerator operation.

Even if you don't accelerate downhill, the car will slide down with the slope and inertia, and in D gear, the computer will judge that it needs to keep increasing the speed to operate.

The D of the automatic transmission car is the forward gear of the car, and the D gear is one of the most common gears in the automatic transmission model, which belongs to a kind of forward gear, covering all the number of forward gears in the automatic transmission of the car. When the shift lever is in D gear, the hydraulic system controls automatically switch to the corresponding forward band based on the throttle opening signal and the vehicle speed signal.

Due to the different designs of different models, the D gear generally includes from 1st gear to high gear or 2nd gear to high gear, and will automatically change gears due to changes in speed and load. By placing the paddle lever in D gear, the driver can control the speed of the car as long as the accelerator pedal is controlled. By placing the gear selector lever in the D position during normal driving, the car can automatically shift gears between 1-4 (or 3 gears).

Hello: D-drive-forward gear, is the abbreviation of the English letter drive, D gear is the forward gear, also known as the drive gear, D gear should be a favorite gear for many people, because D gear has always had the saying that "D gear goes to the world", but although D gear is very real, but at some point, using D gear will be more disadvantageous.

D is the forward gear, R is the reverse gear, P is the parking gear, long-term parking use, automatic transmission models have some S (or L) gear, that is, the sports mode, climbing or acceleration overtaking, the manual automatic also has M gear, that is, the manual mode, + on behalf of the gear, - on behalf of the retreat.

The "+" symbol next to the D gear is unique to the manual model, i.e. upshift or downshift, and is used in the manual mode of the transmission, which is often marked as M or S.

Many people drive the manual automatic car has always been D gear, it is not clear when to switch to M gear, that is, manual mode, thinking that you have to wait for the car to stop to switch, in fact, you don't need to, you can change from D gear to M gear at any time, when changing gears, you only need to dial the gear lever or the steering wheel of the shift paddle or press the shift button.

What does automatic P, R, N, D, S, L mean?

Automatic D is a forward gear. In daily driving, automatic transmission models are generally hung to D gear can do whatever they want, while manual transmission models are relatively troublesome, and need to keep changing gears to accelerate and decelerate, especially for long-distance driving, driving manual transmission cars is more tiring, which should be the reason why Chinese people generally like automatic transmission models.

D and R also have the same function and are required when driving. D gear is based on the drive, that is, we say the forward gear, in our daily driving process, as long as you hang to the D gear you can do as you like, commonly known as "D gear to go the world". R gear is based on the reverse, that is, what we call the reverse gear, this gear is the same as the reverse gear of the manual transmission model, but it should be noted that you must hang the R gear for reversing after the car is stopped, otherwise it will hurt the gearbox.

Both P and N have the same function and are used when parking. P gear is based on parking, that is, we say parking gear, when hung to P gear, the car's braking device will lock the output shaft, generally speaking, we need to hang to P gear when parking, even if it is stopped in the middle slope, N gear is based on neutral, that is, we say neutral, generally used when temporarily parking, for example, when waiting for a red light, but it is worth reminding that when hanging into N gear, in order to avoid the car slipping, you must step on the brakes.

Generally, the automatic transmission (AT) is used to adjust the speed of the car, and the control system of the automatic transmission automatically selects the appropriate gear according to the speed and load of the engine when driving, thus replacing the subjective judgment of the timing and shift operation of people. In layman's terms, an automatic transmission car is a kind of dumb car.

Nowadays, more and more cars are equipped with automatic transmission clutches, commonly known as automatic transmission cars. Automatic cars generally have P, N, R, D gears, etc., what do these mean?

D gear (Drive): Forward gear, which is used on general road surfaces and is also one of the most commonly used gears. It can automatically switch to a comfortable working state according to the road conditions and the speed of the car.

Neutral: neutral, which acts in the same way as the manual transmission, and is used when temporarily parking. Another effect is that if the engine suddenly stalls while driving, if you want to restart the engine while driving, you need to shift into N gear.

Generally, when waiting for the traffic light, put the gear into N gear. Remember not to coast in N gear when driving in automatic transmissions! Because today's cars are basically not carburetor cars, there is no way to save fuel with this method, and it is easy to damage the clutch and cause danger!

P gear (parking): Parking, used when the engine is turned off or when the car is stationary, parking, as the name suggests, is used for parking. When the vehicle is stopped, you need to put the gear into P gear to power off, pull out the key, and lock the door.

When the gear is engaged in P gear, the vehicle's braking mechanism is locked, and the vehicle will not be displaced even if it is parked on a ramp! Note that the car must remain motionless while in this position, otherwise the transmission will be damaged.

R (Reverse): Reverse, which functions the same as the reverse gear of a manual transmission. Before engaging in R gear, be sure to confirm that the vehicle has been stopped, if the vehicle is not stable and then hooked into R gear, it may cause damage to the gearbox, many manufacturers have designed anti-misoperation buttons or positions!

Low gear: Low gear, also known as hill climbing, works to limit the range of gear ratios to reduce speed and increase torque. It generally only allows you to change gears between 1 2 or 1 3 gears.

S gear (SPORT): also known as the difference in sports mode, this mode automatically adjusts the engine speed and the corresponding shift time, slow upshift or early downshift, in order to keep the engine at a high speed, whether it is a hill climb or a quick overtaking can be used to the S gear, in the S gear, the gearbox will automatically downshift, so that the engine speed increases, the torque output increases, so as to obtain greater power, you can feel a more obvious sense of acceleration, but the fuel consumption is definitely higher. (Photo by photo:.)

Dong Peng) @2019

The D gear is the driving gear: the most commonly used gear. When it's time to raise or lower gears, this can be done with throttle control.

Automatic Transmission Details:

The gear is neutral. Neutral is a temporary stop to shift into this gear. For example, when waiting for a traffic light, the hand brake should be pulled at the same time. Disable this gear when going downhill.

Gear stopping: When the car is stopped, the vehicle in P gear will start braking to prevent it from moving. Now some models will independently go out of P gear, which is called electronic brake, and the principle is the same.

The gear is reverse: when the vehicle stops, it can only be hung in this gear, and the reverse gear is the gear that realizes the backward function of the whole vehicle.

The gear is a sporty gear:

The difference between D gear and S gear is that the computer switches different shift programs, so S gear can be switched at any time without adverse effects such as transmission damage. Suitable for overtaking, not suitable for high-speed use.

The gear is low:

When the vehicle is going downhill, shift into low gear to reduce braking; When the vehicle is going uphill, it will be more powerful to climb the hill with a low gear.

gear in manual mode:

Gears specific to automatic manual transmission vehicles. The symbol indicates upshift, while the - symbol indicates downshift.