My electric sewing machine stitches are adjusted to the maximum and the stitches are still very smal

It is recommended to adjust it to between 3-4 for normal use, if you make thin clothes such as chiffon, lace and silk, you can adjust it smaller, and thick clothes or bed sheets and quilt covers can be adjusted larger. The adjuster is on the right-hand side of the protruding rotating bar, twist it to the right, and then you can slide it up and down, adjust it to the appropriate number position, and then tighten it.

Operation steps: 1. The winding sequence of the line and the placement of the bottom thread core must be correct (as shown in the manual), otherwise the sewing machine will not work normally.

2. The threading direction must be correct (from front to back) when threading the needle, otherwise it will not be possible to sew normally.

3. Do not use the foot pedal switch and the power button at the same time.

4. Please take out the battery when using the transformer.

Precautions: 1. The power button and foot pedal cannot be used at the same time.

2. The rectifier and the dry battery cannot be used at the same time, and the sewing machine will be damaged if used at the same time.

3. When the positive and negative poles of the battery are wrong, the machine will be reversed, and the sewing machine will not be able to sew when it is reversed.

4. Continuous long-term reversal of the machine will damage the sewing machine.

5. Do not use fabrics with too hard texture and too thickness.

6. Please use 4 No. 5 batteries for rectifiers.

Swap the cloth teeth, or turn the cloth teeth higher!

There is a button in front of the head of the electric sewing machine pin, which moves upwards to make the stitch smaller, and down to move the stitch to make the stitch larger. You can move to the right position according to your situation and get the right pin.

Operation steps: 1. The winding sequence of the line and the placement of the bottom thread core must be correct (as shown in the manual), otherwise the sewing machine will not work normally.

2. The threading direction must be correct (from front to back) when threading the needle, otherwise it will not be possible to sew normally.

3. Do not use the foot pedal switch and the power button at the same time.

4. Please take out the battery when using the transformer.

Precautions: 1. The power button and foot pedal cannot be used at the same time.

2. The rectifier and the dry battery cannot be used at the same time, and the sewing machine will be damaged if used at the same time.

3. When the positive and negative poles of the battery are wrong, the machine will be reversed, and the sewing machine will not be able to sew when it is reversed.

4. Continuous long-term reversal of the machine will damage the sewing machine.

5. Do not use fabrics with too hard texture and too thickness.

6. Please use 4 No. 5 batteries for rectifiers.

1: The presser foot is not put down.

The feeding teeth are too low. 3: The electric board on the computer sewing machine has a fast and slow Jian, you can see if it is slow.

Related Notes:Electric sewing machine has the characteristics of intelligence, lightweight, easy operation, safety, etc., with the continuous development of industrialization, the current electric sewing machine is also declining. Electric sewing machines are the best alternative to traditional and bulky traditional sewing machines.

Electric sewing machine is the perfect combination of traditional sewing machine and modern intelligent electronic technology, is a necessary sewing tool for modern housewives, and is also a necessary garment sewing equipment for modern clothing enterprises, which can help people complete sewing work efficiently and safely.

For example, if you pick the knob of the pin, the maximum is 5, you loosen the screw on the knob slightly, and then turn the knob clockwise, turn to 3, and then tighten the screw, turn the knob to 5, it will be big, if it is still too small, as mentioned above, continue to adjust, and see if your cloth teeth are too low, if it is too low, the cloth will also cause the stitches to become smaller, just adjust the teeth appropriately, but if it is too high, it will be injected or broken The thread can be appropriate, and then see if the presser foot is too loose to press the sewing material, and increase the pressure appropriately.

This depends on how big the stroke of the tooth is, that is, from the front to the rear, how big the feeding needle distance is, if this distance is not large enough, adjust the needle wheel to the maximum. Loosen the screw in the middle of the pin wheel. Adjust the needle wheel to the side with the small needle size, and then tighten the screws.

Finally, adjust the hand code.

1. If the needle distance button and needle of the sewing machine have been adjusted to the maximum, but the needle distance is still very small, check whether the feeding teeth are too low, and appropriately adjust the height of the feeding teeth and the tightness of the presser foot.

2. Open the side cover, there is a needle code adjustment button in front of it, press it down, when the button is stuck into the slot, the handwheel turns forward, the needle code is adjusted to the contrary.

Precautions for the use of sewing machines:

1. The power button and foot pedal cannot be used at the same time;

2. Rectifier.

It cannot be used at the same time as the dry battery, and the sewing machine will be damaged if used at the same time;

3. When the positive and negative poles of the battery are wrong, the machine will be reversed, and the sewing machine will not be able to sew when it is reversed.

4. Continuous long-term reversal of the machine will damage the sewing machine.

5. Do not use fabrics with too hard texture and too thickness.

6. Please use No. 5 battery for rectifier. 4 pcs.

Hello, I have seen your question and am sorting out the answer, please wait a while

Summary. Hello, how to adjust the size of the stitches of my electric sewing machine, how to repair it? The needle distance knob, adjust to the minimum, and then release the screw inside the knob, twist the knob half a circle to the right, and tighten the knob screw.

There is another way,1Look for a test cloth. First find the test cloth, run a line, use a ruler to measure the size of the needle code, and see if the needle code is big or small.

No matter how the stitch size of my electric sewing machine is adjusted, how can I fix it? Thank you.

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately

Hello, how to adjust the size of the stitches of my electric sewing machine, how to repair it? The needle distance knob, adjust to the minimum, and then release the blind screw inside the knob, twist the knob to the right half a circle, and tighten the knob fingers and screws. There is another way,1

Look for a test cloth. Find a test cloth first, run a line, use a ruler to measure the size of the needle code, and see if the needle code is big or small.

2.Turn on the Auto Routing Mode Button Turn on the machine button and press the Auto Routing Mode button.

3.Set the number of pins: Press the number of pins button in the button area. When you see the number of stitches displayed on the display panel, press the plus or minus sign to set the number of stitch sizes you want.

4.Go back to normal mode and press the back button again, go back to normal mode, and run a line again, exactly for the set number of needle yards.

5.Measure the length of the needle code using a ruler flat on the line of the test cloth, measure whether the needle code is exactly 3 cm long, and constantly adjust the belt until you reach your satisfaction.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your work is very important to me, and your support is also the dynamic and vertical momentum of my progress. Finally, I wish you good health and a good mood!

Summary. Hello, I'm glad to answer for you.

In front of the head of the sewing machine there is a button that moves upwards and the stitches become smaller, and when moved downwards, the stitches become larger. You can move to the right position according to your situation and get the right pin.

The specific steps are as follows:

1. The winding sequence of the line and the placement of the bottom line core must be correct (as shown in the manual), otherwise the sewing machine will not work normally;

2. The threading direction must be correct (from front to back) when threading the needle, otherwise it will not be possible to sew normally.

3. Do not use the foot pedal switch and the power button at the same time.

4. Please take out the battery when using the transformer. Precautions: 1. The power button and foot pedal cannot be used at the same time. 2. The rectifier and the dry battery cannot be used at the same time, and the machine will be damaged if used at the same time; 3. When the positive and negative poles of the battery are wrong, the machine will be reversed, and the machine will not be able to sew when it is reversed; 4. Continuous long-term reversal of the machine will damage the machine;

5. The machine cannot use the fabric with too hard texture and too thick fabric;

6. Please use 4 No. 5 batteries for rectifiers.

How to adjust the size of the stitches of the sewing machine.

Hello, I am glad to answer that there is a button in front of the head of the sewing machine, move up, the stin becomes smaller, move down, the stin becomes larger. You can move to the right position according to your situation and get the right pin. The specific steps are as follows:

1. The winding sequence and the placement of the bottom line core must be correct (shown in the manual), otherwise the sewing machine will not work normally; 2. When threading the needle, the threading direction must be correct (from front to back), otherwise it will not be possible to sew normally; 3. Do not use the foot pedal switch and the power button at the same time. 4. Please take out the battery when using the transformer. Precautions: 1. The power button and the foot pedal cannot be used at the same time; 2. The rectifier and the dry battery cannot be used at the same time, and the machine will be damaged if used at the same time; 3. When the positive and negative poles of the battery are wrong, the machine will be reversed, and the machine will not be able to sew when it is reversed; 4. Continuous long-term reversal of the machine will damage the machine; 5. The machine cannot use the fabric with too hard texture and too thick fabric; 6. Please use 4 No. 5 batteries for rectifiers.

I hope my judgment can help you, and if mine is helpful to you, please give me a thumbs up! Thank you, and I wish you a happy life!

Hello , there is a button in front of the head of the pin of the electric sewing machine, move up, the stin becomes smaller, move down, the stitch becomes bigger. You can move to the right position according to your situation and get the right pin.

Operation steps: 1. The winding sequence of the line and the placement of the bottom thread core must be correct (as shown in the manual), otherwise the sewing machine will not work normally.

2. The threading direction must be correct (from front to back) when threading the needle, otherwise it will not be possible to sew normally.

3. Do not use the foot pedal switch and the power button at the same time.

4. Please take out the battery when using the transformer.

Precautions: 1. The power button and foot pedal cannot be used at the same time.

2. The rectifier and the dry battery cannot be used at the same time, and the sewing machine will be damaged if used at the same time.

3. When the positive and negative poles of the battery are wrong, the machine will be reversed, and the sewing machine will not be able to sew when it is reversed.

4. Continuous long-term reversal of the machine will damage the sewing machine.

5. Do not use fabrics with too hard texture and too thickness.

6. Please use 4 No. 5 batteries for rectifiers.

How to adjust the stitches of the electric sewing machine to the maximum The steps are more detailed and how to adjust the size.

Hello people, there is a button in front of the head of the stitch of the electric sewing machine, move up, the stitch becomes smaller, move down, the stitch becomes bigger. You can move to the right position according to your situation and get the right pin.

Operation steps: 1. The winding sequence of the line and the placement of the bottom thread core must be correct (as shown in the manual), otherwise the sewing machine will not work normally.

2. The threading direction must be correct (from front to back) when threading the needle, otherwise it will not be possible to sew normally.

3. Do not use the foot pedal switch and the power button at the same time.

4. Please take out the battery when using the transformer.

Precautions: 1. The power button and foot pedal cannot be used at the same time.

2. The rectifier and the dry battery cannot be used at the same time, and the sewing machine will be damaged if used at the same time.

3. When the positive and negative poles of the battery are wrong, the machine will be reversed, and the sewing machine will not be able to sew when it is reversed.

4. Continuous long-term reversal of the machine will damage the sewing machine.

5. Do not use fabrics with too hard texture and too thickness.

6. Please use 4 No. 5 batteries for rectifiers.

The Lampang D5A is this model that I sent.

First through the clamp, and then through the wire pick-up hole, and then through the circle of the fixed wire, down into the pinhole is good, very convenient, the part is called the shuttle shell, is put into the shuttle core and then loaded into the shuttle bed, the shuttle shell is raised to the notch of the shuttle bed, slightly press the shuttle shell to install it.

Summary. Hello, kiss, this depends on how big the tooth stroke is, that is, from the front to the back, how big is his feeding needle distance, if this distance is not large enough, adjust the needle code wheel to the maximum. Loosen the screw in the middle of the pin wheel.

Adjust the needle wheel to the side with the small needle size, and then tighten the screws. Finally, adjust the hand code.

What should I do if the needle size of the electric sewing machine is adjusted to the minimum, but the stitches are still relatively large.

Hello, dear to Yinyan collapse, this depends on how big the tooth stroke is, that is, from the front to the rear, how big is his feeding needle distance, if this distance is not large enough, adjust the needle code wheel to the maximum. Loosen the screw in the middle of the pin wheel. Adjust the needle wheel to the small side of the bright jujube feast, and then tighten the screws.

Finally, adjust the hand code.

Hello, dear to Yinyan collapse, this depends on how big the tooth stroke is, that is, from the front to the rear, how big is his feeding needle distance, if this distance is not large enough, adjust the needle code wheel to the maximum. Loosen the screw in the middle of the pin wheel. Adjust the needle wheel to the small side of the bright jujube feast, and then tighten the screws.

Finally, adjust the hand code.

Tried it, it's still like that.

Hello, dear, are you setting it up?

Did as you said.

No, I can't. Hello, kiss, for example, the knob you pick the pins is up to 5 You loosen the screw on the knob a little and then turn the knob along the time with the bright needle Turn to 3 Then tighten the screw in the bar knob to 5 It will be big If it is still too small As mentioned above, continue to adjust It also depends on whether your teeth are too low If it is too low, it will also lead to smaller stitches Just open the teeth appropriately and adjust it high, but if it is too high, it will inject or break the dotted line Appropriate and then see if the presser foot is too loose to hold the sewing material Increase the pressure appropriately.

Kiss, is the needle code only big and can't be smaller?

Hello, dear, no.

Please reply, dear, is the needle code only big can not be adjusted smaller?

Hello, yes.