Where is the supervision engineer to take the exam, and how to take the professional supervision eng

Do you want to apply for the professional supervision engineer or the national registered supervision engineer? Then you have to make it clear what type and what major you are applying for? The exam is held once a year, and the exam is generally scheduled in mid-May.

In principle, test centers will be set up in provincial capitals. I looked on the Internet that there are many professional supervision engineers of the Ministry of Transportation? I don't know if you took the exam there?

I haven't seen the notice of 09 years, the following is 08 years, you see, it should be much worse: Candidates can apply for the examination in the location of the individual's unit, service supervision project or household registration (subject to the address indicated on the ID card), and the on-site registration materials are submitted collectively after signing the opinions of each unit, and the following application conditions are met: (A) abide by national laws, regulations and professional ethics, good work performance, love supervision work.

2) Obtain the qualifications for intermediate or above professional and technical positions in engineering or economics. (3) Under the age of 65, in good health, competent for on-site supervision. (D) to apply for the supervision of the engineer qualifications must have a highway, water transport engineering or related professional college degree or above, engaged in highway or water transport engineering and related professional and technical work for more than 5 years; To apply for the qualification of professional supervision engineer, you must have a technical secondary school degree or above in highway or water transportation engineering or related majors, and have been engaged in highway or water transportation engineering and related professional and technical work for more than 3 years.

E) did not obtain intermediate or above professional and technical qualifications, but has participated in the 2004, 2005 examination, and at least 1 subject to reach the passing score line of candidates, in line with the conditions of (a), (c), (iv) can continue to register for the professional supervision engineer qualification examination.

Generally, the exam is taken in a city at the provincial level, and you are studying law, so you cannot apply for the exam. It is required to have a college degree or above, an intermediate title or above in engineering or economics (the Ministry of Construction also requires an intermediate level for 3 years).

Through the company's application, the company will go to the registration center to register for the exam. If you don't have a unit, you can also go to the registration center to take the test, but you can't be sure, the test must be in the provincial capital, because generally only the provincial capital city has a test center.

You can check it out again.

Hello, if you want to apply for the professional supervision engineer, you need to register with the Provincial Construction Supervision Association or the subordinate Municipal Construction Supervision and Burial Association. Because the professional supervision engineer is issued by the Provincial Construction Supervision Association (a subordinate unit of the Provincial Construction Department).

The specific application requirements are as follows:

A) abide by national laws, regulations and professional ethics, good work performance, love to supervise the work of bad files.

2) Under the age of 65, in good health, competent for on-site supervision.

3) Applicants for highway and water transport professional supervision engineer must have a bachelor's degree or above in highway or water transport engineering or related majors, and have been engaged in highway or water transport engineering and related professional and technical work for more than 3 years.

4) To apply for the qualification of highway and water transport supervision engineer, you must have a college degree or above in highway and water transport engineering or related majors, and have been engaged in highway or water transport engineering and related professional and technical work for more than 5 years; To apply for the qualification of professional supervision engineer, you must have a technical secondary school degree or above in highway or water transportation engineering or related majors, and have been engaged in highway or water transportation engineering and related professional and technical work for more than 3 years.

The November examination time of the 2022 supervision engineer is scheduled on November 26 and 27, and the examination adopts the method of written examination and closed-book examination.

"Supervision engineer" refers to the national unified examination, obtained the "supervision engineer qualification certificate" and registered engineering construction supervision personnel.

The supervising engineer is the bridge between the owner and the contractor to monitor the project quality, project progress, investment control, contract management, safety management, organization and coordination on behalf of the owner.

Not only does the practitioner need to know engineering and costing, but he also needs to be very aware of the building regulations. The supervising engineer refers to the supervising engineer authorized in writing by the legal representative of the supervision unit, fully responsible for the performance of the entrusted supervision contract, and presiding over the supervision of the project supervision agency. In addition, the supervision personnel also include professional supervision engineers and supervisors, but for the quality of the whole process supervision of information system engineering construction, the role of the chief engineer is crucial.

The 2022 Supervision Engineer Professional Qualification Examination was held on May 14 and 15, 2022.

According to the Regulations on the Quality Management of Construction Projects, the supervision should have the following responsibilities: Chapter V quality responsibilities and obligations of the engineering supervision unit Article 34 The engineering supervision unit shall obtain the corresponding level of qualification certificate in accordance with the law, and undertake the project supervision business within the scope of its qualification level.

It is forbidden for the project supervision unit to exceed the scope of the qualification level of the unit or to undertake the project supervision business in the name of other project supervision units. It is forbidden for the project supervision unit to allow other units or individuals to undertake the project supervision business in the name of the unit.

The project supervision unit shall not transfer the project supervision business.

35th project supervision unit and the supervised project construction contractor and building materials, building accessories and equipment units have a subordinate relationship or other interests, shall not undertake the supervision of the construction project.

Article 36 The project supervision unit shall, in accordance with laws, regulations and relevant technical standards, design documents and construction contracts, supervise the construction quality on behalf of the construction unit, and assume supervision responsibility for the construction quality.

37th engineering supervision unit shall be selected with the corresponding qualifications of the chief engineer and supervision engineer stationed at the construction site.

Without the signature of the supervising engineer, building materials, building accessories and equipment shall not be used or installed in the project, and the construction unit shall not carry out the construction of the next process. Without the signature of the chief engineer, the construction unit does not allocate the project money and does not carry out the completion acceptance.

In the past two years, the supervising engineer has held an examination in May。The examination is conducted in the form of a closed-book written test.

The first time to apply for the examination supervision certificate, first find a supervision unit to affiliate, and then in the name of the unit under the name of the staff to apply for the supervisor, the exam is very simple, to participate in the training can also be, do not go to the training self-study, a little look at the book, in the city personnel examination center to register, go to know (including the annual examination time). After getting the supervisor certificate, you can apply for the supervision engineer after working for a period of time. Good luck with your progress!

I'm a university student, can I take the test at school?

The subjects of the supervision examination are "Basic Theory of Construction Engineering Supervision and Related Regulations", "Construction Project Contract Management", "Construction Engineering Old File Socks Target Control" and "Construction Engineering Supervision Case Analysis".

Supervision Engineer Examination Subjects: Basic Subjects: Basic Subjects of Construction Engineering Supervision and Related Regulations, Construction Project Contract Management; Professional subjects: "Construction Project Objective Control" and "Construction Project Supervision Case Analysis". Exams by professional category.

Supervision engineer exam question type: 1. "Basic Theory of Construction Engineering Supervision and Related Regulations", "Construction Engineering Contract Management", "Target Control" 3 question types are multiple-choice questions, which are divided into two types: multiple-choice questions and multiple-choice questions. 2. The question type of "Case Analysis of Construction Project Supervision" is a subjective question (case question).