What is the scoring principle of the case study of supervision engineers in 2019?

The scoring principles of the case analysis of the supervising engineer are as follows:

Case Analysis of Construction Project Supervision" answer requirements.

1. This subject is a subjective question, which is marked online, and candidates need to answer on a special answer sheet.

There are 6 questions in the 2nd paper, each of which is worth 20 points. There are 4 questions for each big question, and the answering time is 240 minutes, with a total score of 120 points and 72 points to pass.

3. Case analysis: The answer requirements are reasonable. The conclusion is correct; If there is a calculation requirement, the calculation process should be briefly written.

Case Analysis of Construction Project Supervision" scoring principles.

1 scoring point. For the reading of case analysis questions, the main thing is to see the points, the marking teacher has 90 seconds for a question, and only about 20 seconds to read a question in a question, if you see that you have a few points similar to the score points in these 20 seconds, you will be given a few points.

Generally, a point system is given, and points are scored for correct answers, and no points are deducted for incorrect answers. The reason for propriety is generally with 1 point. This year, 20 points for each major question. There are 4 questions per question in the case analysis question, so the full score for each question is 5 points. Candidates can be assessed within this area.

2. Knowledge points. If the examinee answers more irrelevant knowledge points in the question and the knowledge points are wrong, don't worry too much, the extra answer is generally not deducted points, and it doesn't matter if you answer more than you answer wrong. However, the first thing to judge is right or wrong, if this step is not done well, it is useless to write more or less later.

3. Neatness of handwriting.

Subjective questions are not machine-judged like multiple-choice questions, and they are manually judged. At the very least, the manual scoring must be correctly identified by the judge, and it doesn't matter if the words are written well or not, as long as they are neat, don't dance with dragons and phoenixes. But if you are so scribbled that you have to guess every word or most of the words cannot be understood at once, I am afraid that the judge will only give you 1-2 points directly.

4. The order and position of the answers.

Since all papers have to be entered into the computer before grading, each teacher is only responsible for grading one of the questions, and the other questions are not visible. Therefore, candidates must pay attention to answering in the specified position according to the question number, because once the question order is written incorrectly and the answer is written in the wrong place, even if it is marked on the test paper at the end, even if the answer is correct, there may be no score.

72 points passed in the case analysis of construction project supervision.

There are 6 questions in the case analysis subject of construction supervision engineering, each question is 20 points, a total of 120 points, and the test duration is 240 minutes. As long as the candidate reaches 60% of the full score, it is qualified, that is, the passing score line is 72 points, and the results of the supervision engineer examination are 4 years for a cycle of rolling management.

Full score and qualification standards for each section of the supervision engineer: The full score of "Construction Project Contract Management" is 110 points, and the qualification standard is 66 points. The maximum score for "Objective Control" is 160 points, and the passing standard is 96 points.

The full score of "Basic Theory of Construction Engineering Supervision and Related Regulations" is 110 points, and the passing standard is 66 points. The full score of "Case Analysis of Construction Project Supervision" is 120 points, and the passing standard is 72 points.

The examination subjects of the three majors of supervision engineers are not the same, and the public subjects are all tested in the "Construction Engineering Contract Management" and the "Basic Theory of Construction Engineering Supervision and Related Regulations". Objective control case analysis is a professional subject, and the content of each major is different. Secondly, there are different departments in charge, and the Ministry of Housing and Urban-Rural Development is responsible for civil engineering and construction engineering; The Ministry of Transport is responsible for the traffic and transportation engineering major; The Ministry of Water Resources is responsible for the major of water conservancy engineering.

Construction project supervision case question answering skills:

1. The regulations are clear and the level is clear. Because there are many answers to case analysis questions, it is necessary to pay attention to the regulations and mark the serial number when answering, so that the key points and key points of the answer are clear and prominent, so that the teacher will not be negligent and affect the score when grading, and it will also be recognized by the teacher and get a higher score.

2. Combined with materials, there is evidence. The answers to case analysis questions generally have their own basis for answering, so when answering questions, candidates should extract the knowledge points on which they base their answers and analyze them in combination with cases, so as to be reasonable, reasonable, reasonable, clear in thinking, easy to grasp the central point, and obtain high scores.

3. Analyze cases and dig out test points. To find the answer from the material, we should pay attention to seeking the answer from the question, fully understand the relationship between the problem and the case, so as to analyze the main points of the question and the basis of the question, so as to seek the angle of the answer.

The supervising engineer case scoring criteria can be designed on a case-by-case basis, and here are some possible scoring criteria and considerations:

Project Background: Evaluate the characteristics and challenges of the project involved in the case, taking into account factors such as the size, complexity, and importance of the project.

Analysis of project objectives.

Supervision process: Evaluate the performance of the supervising engineer in the project cycle, including supervising the construction progress, quality control, safety management, contract management, etc.

Problem Solving Ability: Evaluate the cherry ridge problems and challenges faced by the supervising engineer in the process of the project, and examine their problem-solving ability and methods, including risk management, change management, dispute resolution, etc.

Professional knowledge and skills: Evaluate the professional knowledge level and skill application ability of the supervising engineer, including the understanding and application ability of engineering standards, norms and regulations, as well as the mastery of relevant engineering technology.

Teamwork ability: Evaluate the cooperation and communication skills between the supervising engineer and the project team, the owner and the contractor, including coordination, conflict resolution and effective communication skills.

Teamwork. Achievements and benefits: Evaluate the results and benefits achieved by the supervising engineer in the project, including the performance of project progress control, quality improvement, cost savings, etc.

The above are some of the possible scoring criteria, which can be adjusted and supplemented according to the purpose and requirements of the assessment. In the scoring process, the corresponding weight can be given according to each scoring criterion, and the final score can be determined by comprehensively considering the performance of all aspects.

The scoring criteria for supervision cases are as follows:

All case answer questions in the supervision engineer examination are subject to a scoring system, and correct answers are scored, and no points are deducted for wrong answers. The kind of closure and reason is generally and 1 point. This year's case analysis has a total of 6 questions, each question is 20 points, and generally there will be 4 small questions for each case question, so the full score of each question is 5 points, and candidates can evaluate the score in this range according to the score points in their answers.

Further information is as follows:

Engineering supervision refers to a professional service activity in which the supervision unit with relevant qualifications is entrusted by Party A to monitor the construction of Party B on behalf of Party A in accordance with the construction documents approved by the state, the laws and regulations related to engineering construction, the engineering construction supervision contract and other engineering construction contracts.

Engineering supervision is a kind of paid engineering consulting services; It is commissioned by Party A; The main basis of supervision is laws, regulations, technical standards, relevant contracts and documents; The criteria of supervision are law-abiding, integrity, fairness and science; The purpose of supervision is to ensure the quality and safety of project construction, improve the level of project construction, and give full play to the investment benefits.

The construction project supervision unit is entrusted by the construction unit to control the quality, cost and progress of the construction project in accordance with laws and regulations, engineering construction standards, survey and design documents and contracts in the construction stage, manage the contract and information, coordinate the relationship between the relevant parties of the project construction, and perform the service activities of the statutory duties of construction project safety production management.

When concluding a construction project supervision contract, if the construction unit entrusts the survey, design, warranty stage and other related services together, it shall clarify the relevant terms and conditions such as the scope of work with the bench, the content, the service period and the remuneration of the relevant services in the contract.

The implementation of construction project supervision should follow the following main basis: laws and regulations and engineering construction standards; construction project survey and design documents; Construction project supervision contract and other contract documents. The project supervision unit shall be fair, independent, honest and scientific to carry out construction project supervision and related service activities.

How to score the case study of the supervising engineer is as follows:

A supervising engineer is a professional who is responsible for construction site management, project quality supervision and construction safety. Their responsibilities and responsibilities are very important and involve the safety of the people's property and life.

Therefore, the supervising engineer must have a rigorous working attitude and excellent professional knowledge. This paper will combine the case of a supervising engineer and analyze it one by one from the perspective of the work scoring of the supervising engineer.

A supervising engineer is responsible for supervising a highway project. Due to the peculiarities of the project, the roadbed needs to be reinforced during the construction process. The supervising engineer carefully inspected the construction process, found some problems with potential safety hazards, and put forward improvement plans in time to ensure the progress of the project and the safety of construction.

The first criterion is work attitude. We can rate the engineer on how committed to the work, how detailed the work, and how sharp it is to deal with problems.

From this case, it can be seen that the engineer is extremely committed to the work, always vigilant, and every time he inspects the roadbed, he carefully observes, carefully records and takes the initiative to provide improvement suggestions for the work. As a result, the engineer can give a high rating for his work attitude.

The second criterion is professional quality. Professional qualities include professional knowledge and skills, the ability to deal with problems, the ability to solve technical problems in the field, etc. In this case, the engineer was not only proficient in all aspects of building construction, but also proposed a perfect safety improvement plan during the construction process, so it should also be given a high score from the perspective of professional quality.

The third criterion is work output. The results of the work include the performance of the quality level, the progress of the project and the established budget. In that case.

The supervision of the engineer has played an important role in promoting the smooth progress of the project, and has played its role in supervising the completion of accident prevention measures, standardizing safety signs, and ensuring the quality of road construction. So the results of the work should also be qualified.

To sum up, the case of the supervision engineer needs to be scored from three aspects: work attitude, professional quality and work results. The supervising engineer who can show his or her potential in every direction is an excellent person who can be trusted and praised.

The scoring criteria for different question types are different, multiple-choice questions, wrong choices or no points are not awarded, multiple-choice questions, multiple-choice, incorrect choices are not scored, and each option is scored by less choice. The specific standards are as follows and are for reference only.

This question type is given points by point, there are a few similar points to the score point, it will give you a few points of points, the supervision engineer "case analysis" subject test 6 case analysis questions, each question 20 points, each big question, there are 4 small questions, a total of 120 points, the use of network marking, candidates need to answer on the special answer sheet.

When answering, a reasonable analysis should be carried out, the conclusion is correct, and the calculation process should be briefly written if there are calculation requirements. Generally, the scoring system is adopted, the correct answer is scored, and the handwriting should be neat without deducting points for wrong answers, if it is too sloppy, even if you answer the question correctly, you may only give 1-2 points.

1. The qualification standard of "Construction Project Contract Management" is 66 points (full score of 110).

2. The qualification standard of "Construction Project Objective Control" is 96 points (out of 160 points).

3. The qualification standard of "Basic Theory of Construction Project Supervision and Related Regulations" is 66 points (out of 110 points).

4. The qualification standard of "Construction Engineering Supervision Case Analysis" is 72 points (out of 120 points).

Test Score Management:

Examination of the whole subject: the supervision of the engineer professional qualification examination results for a cycle of rolling management methods, in the four consecutive examination years through all the examination subjects, in order to obtain the supervision of the engineer professional qualification certificate.

Exemption from basic subjects and additions: The results of professional subjects are managed on a rolling basis according to a cycle of 2 years, and all examination subjects are passed in 2 consecutive examination years in order to obtain the professional qualification certificate of supervision engineer.

The number of passing points in the case study of the supervising engineer is as follows:

1.Supervising Engineer Case Pass Line

Among the subjects of the supervision engineer examination, the full score of the subject of "Case Analysis" is 120 points, and the passing score line is 72 points. There are a total of four subjects in the supervision engineer examination, of which the subject of "case analysis" is divided into three professional categories of civil engineering, water conservancy engineering, and traffic and transportation engineering.

Supervision Engineer Examination Qualification Standards: "Construction Engineering Contract Management": 66 points (full score of 110 points); "Control of Construction Project Objectives":

Passing criteria: 96 points (out of 160 points); "Basic Theory of Construction Engineering Supervision and Related Regulations": 66 points (full score of 110 points) for the qualification standard; "Case Analysis of Construction Project Supervision": 72 points (out of 120 points) for the qualification standard.

2.How many points is the case of the supervising engineer

The case score line of the supervising engineer is 120 points, and the exam question type only has case analysis questions. "Basic Theory of Construction Engineering Supervision and Related Regulations": the full score is 110 points, including 50 points for single-choice hand-laughing questions and 60 points for multiple-choice questions; "Construction Project Contract Management":

The maximum score is 110 points, including 50 points for multiple-choice questions and 60 points for multiple-choice questions.

Construction Project Objective Control: The full score is 160 points, including 80 points for multiple-choice questions and 80 points for multiple-choice questions; "Case Analysis of Construction Project Supervision": The full score is 120 points, and the exam question type is a case question.

Supervision engineer single-choice questions are worth one point per question, multiple-choice questions are worth two points per question, and case analysis questions are worth 20 points per question.

3.Supervising Engineer

It refers to the engineering construction supervision personnel who have passed the national unified examination and obtained the "Supervision Engineer Qualification Certificate" and have been registered. The supervising engineer is the bridge between the owner and the contractor to monitor the project quality, project progress, air control of the investment bureau, contract management, safety management, organization and coordination on behalf of the owner.

Not only does the practitioner need to know engineering and costing, but he also needs to be very aware of the building regulations. The supervising engineer refers to the supervising engineer authorized in writing by the legal representative of the supervision unit, fully responsible for the performance of the entrusted supervision contract, and presiding over the supervision of the project supervision agency. In addition, the supervision personnel also include professional supervision engineers and supervisors, but for the quality of the whole process supervision of information system engineering construction, the role of the chief engineer is crucial.