Can the 2014 Volvo S60L burn oil be repaired without dismantling?

No, if you find that the engine oil is burned, you must go to the repair shop immediately to deal with it.

Criteria for judging engine oil burning:

1.Thousands of kilometers of engine oil consumption is in between, so it is basically regarded as burning engine oil.

If it does, it's a serious oil burn. This is to go to the fast repair shop to get a bottle of engine oil and add it to the end, it may be that you really need to repair it.

How do you estimate the amount of oil you consume in your tank? There will be two signs on the dipstick, max (highest scale mark) and min (lowest scale mark), there is about 1L of engine oil between these two scale marks, which can be used to know the approximate fuel consumption.

2: Judge by the phenomenon of the car.

The most obvious phenomenon of burning engine oil is: when the car starts, it begins to emit blue smoke; Or if you accelerate sharply, bang the throttle on the spot, and the blue smoke will float out, that is, the engine oil will be burned, and you need to check it.

Therefore, if you have a friend who has a black exhaust pipe during the usual use of the car, when you go to the fast repair shop for maintenance, you can ask the master to check whether the fuel consumption of the engine oil is abnormal.

3: Check through the indicator light and maintenance, in layman's terms, it is to look at fuel consumption through the amount of oil.

Now there are some good cars, the amount of oil can be seen on the central control dashboard, and ordinary family cars can be measured with the oil dipstick in the method mentioned above.

The easiest thing is to do the maintenance, the oil is near the max, the car drives out of the fast repair shop and walks 1000 kilometers, and comes back to check if it is only half, that is to burn the oil.

What can we do about the current situation of burning engine oil in the car?

1: Choose a better oil. Choose a reliable, better engine oil, the model should match, it is best to choose the brand, quality ***.

2: Increase the viscosity of the oil. If it is a relatively old car, it may be due to prolonged movement or wear and tear. Therefore, it is necessary to increase the viscosity of the engine oil appropriately to prevent the occurrence of engine oil burning.

For example, the original 5w30 can be replaced with 0w40 or 5w40, which is still somewhat helpful.

As long as it is determined that the oil is burned due to the stagnation of the piston ring, it is completely possible to use the non-destructive repair agent to complete the oil burning

The problem of your car is piston ring stagnation, you can first check whether there is a problem with the exhaust valve, if not, it is 100% piston ring stagnation caused by burning engine oil. As long as the piston ring is cleaned and released, do not overhaul the engine if it does not need to be overhauled.

Overhaul, maintenance multi-person operation technology is not unified and assembly is not good, the hot and cold value of the engine assembled at room temperature is not enough, the overhaul is 1-40,000, and the vehicle is depreciated by 3-60,000. The disadvantages of overhaul: do not turn on the engine as a last resort, after opening, there are traces of disassembly, the car instantly depreciates a lot, and the result of assembly is unknown.

In the process of dismantling and assembly, the humidity of the air, constant temperature, low temperature are unable to meet the environment of the dust-free workshop operation, there are many people in the plugging and assembly, the technology is not the same, and the assembly can not ensure the stability of a machine because of the screwing and other links, often the later car volume is unable to consume fuel, shaking and other phenomena are found. Don't disassemble the engine without serious cylinder pulling. After the overhaul, 2000 kilometers to change a fully synthetic engine oil for two consecutive times, plus to find a good road condition to run in separately, 3000-5000 kilometers to complete the run-in, the cost of oil + gasoline is very high, and the cost of overhaul and run-in of ordinary cars is 2000 yuan.

And once you call the police, you can call a tow truck immediately, which is more troublesome.

Solution

You can check whether there is a problem with the exhaust valve, if not, it is the oil burned due to 100% piston ring stagnation. As long as the oil repair agent can be used to clean the oil circuit and carbon deposits in the cylinder, and release the piston ring stagnation at the same time. No additional costs are required, and it can be fixed by driving.

The company has a general education to solve the problem of burning engine oil without major repair.

Burning engine oil can be caused by the following reasons:

Cylinders, pistons, and piston rings wear exceeding the limit (including ring breakage, counterparting, and cylinder pulling); Worn valves and ducts, damaged oil seals; Air booster leakage.

The above parts can be solved by overhauling.

In addition, too much oil filling, or the incorrect selection of engine oil labeling, dilute, etc., will also cause the phenomenon of channeling engine oil and burning engine oil, which is a problem that needs to be paid attention to.

If there is a burning of oil on a Volvo engine.

The phenomenon, don't be anxious and don't panic, it's not an engine design defect, it's mainly caused by our daily maintenance of the engine without scientific maintenance, today we will talk about if the oil has been burned, the specific problem of the gear loss may be caused by the stagnation of the piston ring, after eliminating the fault of the accessories, as long as there is a way to release the poor plexus piston ring that is stuck can solve the problem of burning the oil. In addition, vehicles that do not burn engine oil can also prevent possible oil burning problems through this method.

Burning engine oil does not necessarily have to be overhauled, many car owners have not solved the problem after overhaul, and the car also has other problems. You can go under the "no dismantling and repair to solve the problem of burning engine oil", and there is no need to dismantle and repair to solve the problem of burning engine oil, and there will be no harm to the collapse of the car. My XC-60 is the original engine oil after leaving the factory, because I drove 4500 kilometers for a month on a business trip, the oil alarm light turned on, and I went to the maintenance station to check and found that there was no oil.

The car was immediately insured, and I didn't plan to go to the 4S store for maintenance. I don't know what kind of oil to change, but I saw that my peers in the jar are using GT Magic Red engine oil, and the evaluation is quite high. I feel that the most obvious thing is that the power experience is obvious, and the magic red marks that it is replaced once in 10,000 kilometers, and I have no problem with 12,000 kilometers.

Burning engine oil is caused by the use of an unreasonably designed oil cover. Improved versions have already been used. There is no oil consumption problem @2019

Volvo S60L burns engine oil is an isolated phenomenon Not all cars burn engine oil.

There are two reasons why this car burns engine oil, 1Piston ring stagnation - long-term unclean oil circuit caused by excessive carbon deposition and finally burn engine oil 2Oil seal aging, from the kilometer point of view, this car does not have the problem of oil seal aging. So the problem should be caused by the piston ring.

However, the replacement of the piston ring is to be overhauled, but the overhaul cannot meet the requirements of the engine assembly at minus 30 degrees, and there will be unpredictable disassembly and assembly risks. In addition, the overhauled engine will be discounted by at least 10,000 yuan in the second-hand car discount, and the gains outweigh the losses.

If there is a way to repair the piston ring without disassembling the engine release and cleaning the oil circuit to prevent carbon deposits in the future, is it a good solution to the problem? When I first burned engine oil, it consumed one liter of engine oil for 1000 kilometers, and it was repaired according to this logic.

At that time, according to the company's plan to dismantle and repair the burning of engine oil, in the fuel tank plus the company has a general burning oil repair agent, after 4 tanks of oil, I basically run at high speed, and it has been 7000 kilometers no longer add oil, in fact, as long as the piston ring can be released, and the oil does not hurt the car, do not disassemble, it is a very suitable program.

The company has a general education solution to prevent burning engine oil link.

Summary. Hello, I am your exclusive elite technician, we promise to be attentive, careful, and attentive to answer your car questions. Hello, this Volvo S60L engine burns oil, so it is recommended that you use a higher viscosity oil when changing the oil, such as 5W-40 Castrol or Mobil.

Because when the viscosity of the engine oil is a little higher, then the situation of burning the engine oil will be slightly improved, but if the oil burning is particularly serious, then only an overhaul of the engine can solve the problem.

What oil should be used for Volvo S60L to burn engine oil.

Hello, don't worry, I can ask for your question, but wait a minute, I need text for about 2 minutes.

Hello, I am your exclusive elite technician, we promise to be attentive, careful, and attentive to answer your car questions. Hello, this Volvo S60L engine burns oil, so it is recommended that you use a higher viscosity oil when changing the oil, such as 5W-40 Castrol or Mobil. Because when the viscosity of the engine oil is a little higher, then the situation of burning the engine oil will be slightly improved, but if the oil burning is particularly serious, then only an overhaul of the engine can solve the problem.

Generally, after running 3000 kilometers, the oil sometimes alarms, so does it need to be overhauled?

After running 3000 kilometers, the alarm will be called, and the oil burning in this situation is particularly serious, and this must be overhauled.

How is this kind of overhaul generally repaired, and it probably costs a lot of money.

In college, it is generally necessary to replace the piston ring, large and small tiles, and some seals, and the cost of the whole repair is about 8,000 yuan.

Causes of Volvo S60 oil burns and how to prevent it.

The engine oil itself has a certain amount of consumption, and excessive consumption is the problem of burning engine oil. There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the following reasons will aggravate the oil consumption and cause the burning of engine oil, so that the vehicle appears:

1. Carbon deposition occurs in the combustion chamber, which makes the air ring of the piston ambushing ring stuck, and the sealing is poor.

2. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring and weakens the oil scraping performance.

3. Wear occurs between the piston and the cylinder wall.

4. The valve hole overseal is corroded and aged, and the sealing performance fails.

In addition, cars now have crankcase ventilation systems (exhaust valves), which can also exacerbate oil consumption if there is a problem.

Burning engine oil means that the engine oil enters the combustion chamber of the engine and participates in the combustion along with the mixture. The phenomenon of "burning engine oil" in the vehicle will damage the vehicle's oxygen sensor too quickly, resulting in an increase in carbon deposition in the combustion chamber, unstable idling, weak acceleration, increased fuel consumption, and excessive exhaust emissions.

Precautionary measures for burning engine oil:

1. Use high-quality engine oil

Engine oil is very easy to corrode and age in a long-term high temperature state, resulting in the oil film becoming thinner, and it is easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit

Fuel in the combustion process is indispensable to produce carbon deposits, and carbon deposits are the root cause of some car failures, such as the aging of valve seals, piston cylinder wall clearance, etc., are directly or indirectly related to the formation of carbon deposits, considering the relationship between domestic oil products, it is necessary to use high-quality engine oil and (PNF) fuel additives to achieve, which is also the key to achieve no dismantling and repair to solve the problem of burning and trembling engine oil.

It will also burn, burn the engine oil.

It may be that the engine piston is stuck and loses its oil discharge characteristics due to early carbon deposits; The return inlet port is plugged, and the oil cannot return to the crankshaft normally.

Corrosion and embrittlement of tank ventilation, valve oil seals and crankshaft oil seals caused oil leakage.

Due to China's refined oil products (including motor gasoline and motor oil), it is very easy to cause carbon deposits.

Expansion of capital concessions:

"Burning engine oil" means that the engine oil enters the engine of the car.

The combustion chamber, together with the gas mixture, took part in the ignition of the opening. Burning engine oil does not necessarily have to be overhauled, many car buyers have not dealt with the problem after overhaul, and the vehicle also has other problems, no need to solve the problem of burning engine oil, it is not easy to have all the damage to the car.

In the real-time road conditions of frequent start and stop, many car buyers reflect that their car "burns engine oil", so it is necessary to master the injury, identification and prevention methods of burning engine oil.