Is there any difference between whitening injections and dermal fillers????

This plastic surgery technology is the use of non-animal stable hyaluronic acid cultivated by bacterial fermentation, and fillers are injected into the dermal folds and depressions in the form of fillers, or the parts that want to be plumped, to achieve the effect of removing wrinkles and modifying the face, which can immediately remove wrinkles and change the appearance. The most important thing about dermal fillers depends on the amount of filler used. Because hyaluronic acid plastic surgery is not simply to raise the nose bridge, it is also necessary to consider the nose tip of the nose, and also consider that different people will have different requirements for the height of the nose bridge, so the amount of hyaluronic acid used is also different.

However, in general, it is better to use 1-2 fillers for hyaluronic acid surgery.

Whitening injection The whitening injection developed is divided into two injections of different strengths, and the general whitening injection has a course of three months, and every 7 days is a cycle, a total of 21 times. The duration of a course of enhanced whitening injection is three months, and every 10 days is a cycle, a total of 30 times.

Hyaluronic acid originally exists in the human skin, and the proper replenishment of hyaluronic acid in the human skin can not only help the skin absorb a lot of water from the surface of the skin, but also enhance the ability to retain water for a long time. After the age of 25, the human skin begins to age, and the hyaluronic acid contained in the skin will gradually be lost, resulting in the loss of moisture in the skin, loss of elasticity and luster, and the skin will begin to have wrinkles, roughness, dullness and uneven skin tone. The average consumer only pays attention to whitening and wrinkle removal for skin care, but ignores the culprit of the problem - it turns out that the skin is dehydrated.

If the skin is maintained at the age of 25, the skin aging problem can be suspended or slowed down, and the whitening and wrinkle removal can be effective. Only by using the best moisturizing products can the problem of skin aging be completely solved, and the skin care will be effective.

In terms of the ingredients of whitening injections, most of the ingredients in whitening injections are antioxidants, including glutathione, tranexamic acid and vitamin C.

Hyaluronic acid, face slimming injections, and skin boosters are common cosmetic injections in the beauty field. Each of them has different roles and effects.

Hyaluronic acid is a type of hyaluronic acid that is commonly used to fill wrinkles and add facial contours**. By injecting hyaluronic acid, you can improve the elasticity and moisture content of **, making it plumper and youthful. Dermal fillers can smooth fine and deep wrinkles, as well as enhance the shape and size of the lips.

This method works naturally and lasts for a long time.

Face slimming injections are injectable muscle relaxants that are often used to correct facial obesity caused by an excessively large or wide jaw angle. By injecting face slimming injections, you can relax the facial muscles, reduce chewing movements, and achieve the effect of tightening the jawline. Face slimming injections can visibly improve facial contours, making the face look smaller and more sculpted.

Skinboosters are a method of infusing hyaluronic acid and other nutrients to improve skin quality and increase skin moisture levels. Through the injection of skin boosters, you can improve the moisturizing ability of the skin concealment of the muscle fingers, improve the problems of dryness and dullness, and make the skin look more translucent and firm. Skinboosters can also lighten dark spots and acne scars, leaving skin smoother and more refined.

Dermal fillers, face slimming injections, and skin boosters are different cosmetic injections, each with different functions and effects. Hyaluronic acid is mainly used to fill wrinkles and increase facial contours; Face slimming injections are mainly used to correct the problem of facial leakage and obesity caused by too large or too wide jaw angle; Skinboosters are mainly used to improve skin quality and increase skin moisture levels. Depending on your individual needs and your doctor's advice, it is most important to choose the most cosmetic injection method for you.

Please make a decision after consulting your doctor, and be careful to choose a regular institution for cosmetic injections.

The differences between skin boosters and hyaluronic acid are as follows:

1. The composition of skin booster is single-molecule hyaluronic acid, which mainly locks in water and achieves the effect of hydration and moisturizing. Now the skin booster contains more ingredients, in addition to the monomolecular structure of hyaluronic acid, there are also amino acids, etc., which have a good improvement effect on the ** state. If it is already a finished product, you need to choose a regular brand, if the hyaluronic acid skin booster formed by the combination of mutual drugs, it is recommended to choose carefully, do not add too many types, to prevent ** can not be absorbed, and allergic reactions occur.

2. There are many types of hyaluronic acid, such as single molecule, which is used for hyaluronic acid injection, and small molecule hyaluronic acid and large molecule hyaluronic acid are used for soft tissue filling materials, such as facial depression or rhinoplasty and jaw augmentation**. The essence of hyaluronic acid is the hyaluronic acid contained in the human body, so there is no need to worry about foreign body rejection. Hyaluronic acid is not permanent, it will be metabolized by the body within a few months to a year or two, and will not remain in the body.

And small molecule hyaluronic acid is easier to be absorbed by the human body, can be used as a skin care product, such as foaming hyaluronic acid essence, a 500 dalton hyaluronic acid essence can be well absorbed by the bottom layer. Achieving a state of hydration and filling can play a good auxiliary role in daily care.

Help.

Skin boosters and hyaluronic acid are two different fillers, each with its own characteristics and scope of application.

First, the composition is different.

The main ingredient in skin boosters is hyaluronic acid, which is a skeletal type of sugar that can be broken down naturally in the human body. Hyaluronic acid contains a variety of molecules, of which hyaluronic acid is only one of them, and does not account for the vast majority.

Second, the effect is different.

The main function of skin boosters is to replenish moisture, improve the brightness of the first grade, and improve roughness, dullness and other problems. Hyaluronic acid mainly fills skin defects, such as filling fine lines, smoothing wrinkles, etc., to improve the firmness of **.

Third, the scope of use is different.

Due to the different ingredients and effects, the range of use of skin boosters and hyaluronic acid is also different. Skin boosters are more suitable for problems such as poor skin quality, lack of water and oxygen, while hyaluronic acid is more suitable for modifying the appearance of ** and improving fine lines, wrinkles and other problems.

Fourth, the injection method is different.

Skinboosters and hyaluronic acid injections are also injected differently. Skinboosters are usually injected in a "fractional" method, where they are injected evenly into the skin, creating an effect similar to that of "water droplets". Dermal fillers, on the other hand, are usually injected in a "line-type" method, where fillers are injected along wrinkles or defects to fill gaps.

Although skin boosters and hyaluronic acid are both ** fillers, there are differences in ingredients, effects, scope of use and injection methods. For different skin problems, it is necessary to choose according to your own situation, and at the same time, you should choose a regular medical institution for injection to ensure safety and effect.

Hello dear, skin booster is a type of hyaluronic acid. Skin booster is a small molecule of hyaluronic acid, hyaluronic acid can be divided into large molecules, medium molecules and small molecules, the specific molecular size, its function and role are different, small molecules are mainly suitable for some skin boosters to hydrate, large molecules, medium molecules are most commonly used with some dermal injection, or some volume filling, especially a large molecule of hyaluronic acid is most commonly used for some nasolabial fold filling, or rhinoplasty and chin facial filling. Small molecule hyaluronic acid is mainly used for a superficial injection, medium molecule hyaluronic acid can be used for some crow's feet injection, or some forehead wrinkle injection, as well as some depression scar injection, neck line injection can achieve the purpose of improvement.

Therefore, the difference between the two is that skin boosters are a component of hyaluronic acid. Hope I can help you.

Skin booster is a mesoderm method, which is provided for **, and hyaluronic acid is filled.

The main function of hyaluronic acid is to hydrate and moisturize, and the whitening effect is not particularly obvious.

Hyaluronic acid is a hyaluronic acid (HA), also known as glycuronic acid. Hyaluronic acid, which originally existed in the dermal tissue of the human body in a gelatinous form, is responsible for storing water, increasing volume, and making it look full, plump and elastic. However, hyaluronic acid will disappear with age, making ** lose its ability to store water, gradually become dull, aging, and form fine wrinkles.

Hyaluronic acid essence is the best moisturizing and water-locking ingredient, and the effect is very significant, but with aging, hyaluronic acid is also decreasing day by day, and applying this liquid can help**Enhance elasticity, keep hydration, and restore youthfulness.

How to use hyaluronic acid stock solution:

1. Open the hyaluronic acid stock solution, and when using it, drop the original solution to the tiger's mouth (the place between the thumb and index finger), and then apply it to the face with your fingers. Because the tiger's mouth is one of the places with the lowest body temperature, the higher the temperature, the fastest absorption of the original solution, so do not use the palm, the high temperature of the palm, the original solution is easy to be absorbed by the palm.

2. After cleansing, take 2-3 drops and gently massage from the face to both sides until absorption, and from the face to both sides until absorption.

Hello, the main function of hyaluronic acid is to hydrate and moisturize, remove wrinkles, fill and shape, and there is no obvious effect on whitening.

Whitening foods.

Edible whitening foods have gradually become a new attempt at whitening. For example, pearl powder, milk, almonds, etc., those with a higher rank only eat white and light-colored things, and do not eat dark-colored foods.

Many of the problems that arise are related to water shortages.

But some people drink a lot of water or lack of water, the main reason for not having hyaluronic acid is the lack of Jiaoyuan, you can add more, you can try Huaqingyi's Jiaoyuan, which can not only replenish water but also whiten.

I haven't heard of it, but it's good to moisturize.

Wen Li 2009

The function of hyaluronic acid is mainly to fill the hollow areas of the body, so that the filled places look better and smoother, without obvious bumps. However, its disadvantage is that some people may be allergic to hyaluronic acid, which will produce some red, swollen, hard and painful allergic reactions. It is also important to note that complications may occur with hyaluronic acid injections, such as vascular embolism.

Hyaluronic acid cannot be whitened, this is because the beauty principle of hyaluronic acid is filling, which can make ** absorb water, so as to soothe dry skin and smooth wrinkles. Spot removal needs to repel the melanocytes that already exist on **, and whitening needs to strengthen sun protection, because hyaluronic acid does not have the ability to count melanin, nor can it provide sun protection for the skin, so hyaluronic acid cannot remove spots and whiten.

Hyaluronic acid is not an acid, and it is not an effective whitening ingredient (in fact, it cannot be whitened at all).

Hyaluronic acid is a glucan that is digested by digestive enzymes when taken orally; Even if it is partially absorbed, it is difficult to distribute it to the wrinkles you think of.

When used externally, the macromolecular hyaluronic acid cannot be absorbed through the dense stratum corneum on the surface. The so-called "nano" technology is encapsulated, and it is difficult to prove its absorption by conventional methods. There is no scientific basis for similar propaganda in the market.

Therefore, hyaluronic acid cannot be absorbed at all, and can only be attached to the surface. However, it has good water absorption, in layman's terms, it can catch the moisture in the air and attach it to your ** surface, and at the same time, it can also absorb the moisture of your epidermis so that it is not easy to evaporate, which is a very good and safe moisturizing ingredient.

Hyaluronic acid is a macromolecular substance, some advertisements say that small molecule hyaluronic acid can be absorbed by ** is nonsense, no matter how small the hyaluronic acid is, it is also a "macromolecular substance", and its water absorption is that the larger the molecule, the better....

Hello, the function of hyaluronic acid is to hydrate and moisturize, and it does not have the effect of whitening.

The moisturizing effect is better, and the whitening is still fruit acid.