If you want to crack the wireless cat sent by Telecom, flash the firmware to Chinese

Hello, first of all, thank you for your support to China Telecom. It is recommended that you do not crack it, you only need to buy a wireless router, and then connect and set it up according to the instructions to access the Internet wirelessly.

If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom. Have a great day!

I'll just ask: Is your current broadband an adsl in the form of a plugged ** cable?

Not necessarily! Add you q no response.

Equipped with broadband, Internet room! Guangdong Telecom's online business hall is equipped with telecom broadband, faster, easier and more economical! 4M pure telecom broadband, no fixed line and mobile phone, one household and one line, no peak pressure on network speed, please click for details.

Crack? You mean you want the wireless cat to complete the dialing process, this is basically impossible.

It can only be turned on after the wireless function, the computer uses a broadband connection to dial up the Internet, and the mobile phone can install a PPPoe dial-up software to access the Internet.

If the modem has routing and Wi-Fi functions, it can be set, for example, setting the routing function

Log in, log in with the username Telecomadmin, password ne7ja%5m, select the "Network" - "Broadband Settings" function after logging in, and select "2 Internet R Vid 41" for the connection name after entering the interface (some optical fiber modem displays the name of the virtual burial will be different, select the one with the word "Internet"); Select Route as the connection type (some modems may be displayed as IPv4 Route) or Differential Route). Select "PPPoe" as the connection mode (the "connection mode" of some optical fiber modems may be displayed as "Obtain IP mode"), then enter the broadband dial-up account and dial-up password provided by the personnel who apply for broadband installation (Note: If the dial-up password is modified during subsequent use, you need to update the settings here), and finally click "Save" to complete the setting.

1. The telecom optical modem has a shielded routing function.

2. The optical cat is not sent, and if you don't want to use it, you must return it to Telecom, otherwise you will deduct the monthly rent and liquidated damages.

3. To solve this problem, you need to find the business hall and ask to turn on the routing function.

4. Add a wireless router to the Internet, and you can access the Internet on multiple computers.

There is no reason for this, the telecom optical modem is like this, you users love to use it or not, there is no reason to tell you.

The light cat is not sent internally, it is rented to you, and one day you don't want to use it and you have to return it to him, or you will have to deduct your monthly rent and liquidated damages. To solve this problem, you have to go to the business hall and ask for the routing function to be turned on, and you have to take the trouble to complain**.

If you crack the bai automatic dialing du, as long as the computer is turned off and you don't have access to the Internet, it will generate traffic, so concentrate on it. The router of the modem has the same function as a general router. It's just that the cat is integrated with the router.

The routing function of the telecom shielded optical modem, it doesn't matter, you can add a wireless router. You can access the Internet on multiple computers at the same time.

The network cable --- the cat --- wireless router --- connected to the computer, and you can do it. Normal 4 PCs can be used. No dial-up is required, and the computer is automatically connected.

Enter the telecom router A, set it to the designated channel, note the wireless encryption method, and the router LAN port IP gateway (for example, then enter the TP router B, set the LAN port gateway IP to the same network segment (, the specified channel is the same as A, turn on "WDS" in "Wireless Settings" - Basic Settings", "Scan", find the signal of A, click "Connect", set the encryption method and password are all the same as A, and then in the "Wireless Security Settings", set the encryption, and the password is the same. Click **** to get more services, customer service 324 will answer for you.

The problem is very simple, enter the telecom router A, set it to the designated channel, note the wireless encryption method, and the router LAN port IP gateway (for example, then enter the TP router B, set the LAN port gateway IP to the same network segment (, the specified channel is the same as A, turn on "WDS" in "Wireless Settings" - Basic Settings", "Scan", find the signal of A, click "Connection", set the encryption method and password are all the same as A, and then in the "Wireless Security Settings", set encryption, The password is the same.

Turn on the WISP function of the two 360 routers, in Settings - Function Extension - Advanced Tools - WISP, turn on the WISP function - search for WiFi - Connection, and you're done.

Pay attention to the channel and encryption method The last time I did the relay, I found that the channel pair was paired, but AES encryption, TKIP encryption, one can be used, and one cannot be used. There is also DHCP that turns off the route

If you hit 10,000, you will say that you can't get on the Internet, you can't hit **, and everything else is omitted. In a few days, telecommunications staff will come to your door to solve your problems.

I won't do it myself, don't mess around, remember!!

Ann cat's reset switch? A factory reset would be fine.

Hello: You first connect the device as shown below.

Then in the case of not connecting the optical modem, set the LAN port setting of the wireless router, set the IP address to it, and then connect the optical modem, and then you can enter the wireless router, and then you can set other items on the router, enter the setup wizard interface, select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number when opening broadband, you can fill it in.

This is also how I use it at home, directly turn off the cat's wireless signal, and then connect the wireless router with the cat with a network cable. Set up a PPPOE dial-up connection in the router, enter the username and password given by Telecom, and the point connection is OK.