After my Apple phone gets into the water, why can t I play the voiceover?

Updated on technology 2024-03-04
8 answers
  1. Anonymous users2024-02-06

    Generally, the mobile phone is often broken by water, which is the earpiece, microphone, and external speaker, which will be broken once the water enters. You can try to turn off the phone, don't use it, and see if it's okay to dry it for an hour, but you can only go to after-sales.

    After the phone accidentally gets water, it is recommended to do the following:

    First of all, the mobile phone should be salvaged as soon as possible, and if the battery can be removed, the battery should be removed immediately to prevent short circuit; At the same time, it is better to remove the SIM card so as not to lose the contact information. The longer it stays in liquids, the more damage your phone will suffer for life.

    If the phone falls into salt water instead of fresh water. Salt water forms a "salt crust" in the phone's internals. If your phone has fallen into seawater or other salty water, you need to rinse it gently with fresh water – after removing the battery and SIM card, and before the drying process begins.

    Wipe every part of your phone with a cloth or paper towel, and don't move or shake your phone too much so that water doesn't swim around inside your phone.

    Try wrapping your phone in a cloth or tissue for a few minutes to absorb excess moisture. Turn on the cool air setting of the hair dryer and blow at the hole of the mobile phone about 30cm away from the mobile phone for at least one hour.

    Finally, wrap your phone in a thin tissue and put it in a jar or bag full of rice for at least 24 hours, during which time it cannot be turned on. Rice absorbs water very well and can save a damp phone.

    The above is just a salvage measure, if the fault still occurs, please go to the after-sales repair.

  2. Anonymous users2024-02-05

    Generally, the earpiece, microphone, and external speaker are often broken when the water enters, and it will be broken once the water enters.

  3. Anonymous users2024-02-04

    The sub-chip inside the speaker may have burned.

  4. Anonymous users2024-02-03

    If the mobile phone accidentally gets into the water, you can try the following ways to deal with the mobile phone urgently to avoid secondary injury:

    1. Please take the mobile phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the mobile phone.

    2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

    3. Please remove the SIM card and microSD card as soon as possible.

    4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.

    2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.

    3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

    4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

  5. Anonymous users2024-02-02

    The main reasons why the phone suddenly stopped making sound are as follows:

    1. The most common is that the volume is not turned on and the phone is set to vibrate. Many people often forget to modify it after setting it to vibrate, and when the phone is placed on the pillow, the sound is very small when it vibrates, resulting in no hearing.

    2. The speaker of the mobile phone is broken, and in this case, you need to take it to the mobile phone repair shop for repair. Generally speaking, it is best to return to the factory for maintenance, and do not repair it in a small shop to prevent the other party from replacing parts.

    3. The phone has a software failure and the audio driver is damaged. In a similar situation, you can try yourself from the official **** driver of the phone in question. Of course, if it can't be solved, then it needs to be returned to the factory for repair.

    4. The sound of many mobile phones is separated, such as multi**, playing games, etc., it depends on the specific situation, such as multi** There is no sound, as long as the multi** is adjusted to the maximum.

    5. There is no sound when playing **, which leads to this situation is generally a problem of brushing, and there is no brushing into the radio. This is easy to solve, relatively simple, just re-brush it in.

  6. Anonymous users2024-02-01

    If the speaker of the Apple phone gets into the water, you can turn it off, disassemble it, blow dry it and wait for it to dry naturally.

    1. Shutdown treatment: If the machine is found to be flooded, it should be shut down as much as possible to avoid short circuit and expand the scope of damage as much as possible.

    2. Dismantling treatment: Disassemble the entire mobile phone, clean the water inlet part, you need to have professional maintenance tools, do not disassemble the mobile phone at will.

    3. Blow-drying: Dry with a hair dryer or other blowing equipment to remove water, be careful not to be too hot or close to avoid damaging the circuit bucket board.

    4. Wait for natural drying: Put the phone in a ventilated environment and let the water evaporate and dry naturally, which can avoid damage to the circuit board. Apple's tight design makes it more adaptable to everyday use, but when the phone gets into water, the entire structure inside is disturbed, and the speakers are no exception.

    Once the speaker gets water, there may be noise or inability to make sound, and if it is not repaired in time, it will be difficult to maintain the normal state of the mobile phone in the later use.

    Precautions for daily prevention of water ingression:

    When using the mobile phone in daily life, you should pay attention to the waterproof, sweatproof, and anti-collision of the mobile phone. It is necessary to choose the appropriate protective air bush cultivation sleeve, membrane, etc., to avoid damage to the mobile phone. In addition, if there is an abnormal situation in the mobile phone, avoid self-handling as much as possible to avoid incorrect operation and increase the scope of damage.

    Most importantly, be safe and don't leave your phone in a humid environment to avoid unnecessary damage. <>

  7. Anonymous users2024-01-31

    Summary. 1. First of all, booting may cause a short circuit in the mobile phone, which should be turned off immediately, and secondly, use the card to take out the mobile phone ** card and memory card to avoid damage.

    1. First of all, booting may cause a short circuit in the mobile phone, which should be turned off immediately, and secondly, use the card to take out the mobile phone ** card and memory card to avoid damage.

    2. Next, use a dry paper towel to absorb the moisture around the speaker, and then shake the water vigorously until the water cannot be shaken out.

    3. Finally, use a hair dryer to blow the speaker, but keep a certain distance and wait for it to dry.

    It's been three or four hours, is it still useful?

    4. It's useful, just follow my method first, and do it.

  8. Anonymous users2024-01-30

    Do not shake the body when the iPhone is turned on: After the iPhone gets into the water, it should be shut down immediately. If the computer is still turned on in the case of water ingress, eddy currents will be formed and the motherboard will burn out.

    Do not turn on and shake the body: After the iPhone enters the water, it should be turned off immediately. If the computer is still turned on in the case of water ingress, eddy currents will be formed and the motherboard will burn out.

    The first thing to do after shutting down: After shutting down, first wipe off the water on the phone case with a towel. Then quickly unplug the SIM card and keep it somewhere else. Next, use a paper towel to suck up the water from the headphones, dock and SIM card slots.

    Use a damp towel to wipe off stains that are difficult to remove: there are many different types of flooding and water ingress. For example, in addition to fresh water, there are muddy water, sea water, fruit juice, etc.

    If fresh water enters the phone, you can wipe off the water with a towel after turning it off. If water enters the interface of the mobile phone, it can be removed with a paper towel or cotton swab. If muddy water, seawater, juice and other impurities enter the phone, it should be sent to the Apple Store for repair.

    The impurities in the muddy water and sea water are left in the mobile phone, which is an important cause of the mobile phone failure. The same goes for drinks such as fruit juice and coffee that contain sugar or salt. After confirming the shutdown, Ying Yu Nian carefully wiped off the impurities left in the phone with a towel wrung out of water.

    If there is a foreign object attached to the earphone and dock port, it will corrode the phone and cause the phone to malfunction. So it should be carefully removed.

Related questions
14 answers2024-03-04

Brother, there is no standard answer to this question. You just persevere, as long as you persist, you will definitely succeed. Remember, persevere.

6 answers2024-03-04

There may be a problem with your phone's backup software! >>>More

9 answers2024-03-04

I can put CD, I can't put VCD, it should be a problem with the decoder of the ** device, reinstall one. Storm video is OK.,But there's a problem with the connection on the second floor.,I tried it and couldn't**.。 Recommend a Fei Fan** connection: Storm Video.

7 answers2024-03-04

This is all fake.,Of course you can't use it.。。

7 answers2024-03-04

Why can't the Apple phone update the system, hello! There may be the following reasons why the iPhone cannot be updated: 1. The iPhone cannot install the update may be due to a network failure. >>>More