Why can t I update the system on my iPhone?

Why can't the Apple phone update the system, hello! There may be the following reasons why the iPhone cannot be updated: 1. The iPhone cannot install the update may be due to a network failure.

Even if the software or system installation package has been prepared, but the traffic is still needed for the system to be used jointly with other software, you can turn on the network or change a network. 2. It may also be that there is an error in the installation package, you can delete the installation package and try again. 3. It may also be that the space of the mobile phone is too small enough to install, and the lack of space will also cause the software to be unable to install.

Hope it helps!

Is the storage space of the phone large enough, if it is small, it will also cause the phone to not be upgraded. 3.Is it the system components of the mobile phone system that have been deleted?,If it's deleted.,It's not going to be upgraded.。

Answer: The reasons why the iPhone can't update the system are as follows: 1. It is possible that the system configuration is too low to update the latest system. 2. It is possible that you are not connected to Wi-Fi and cannot complete the update.

3. There may be insufficient memory to meet the requirements of installing the latest system. 4. It is possible that the power level does not reach more than 50% when updating.

I said it was no problem to ask the question.

I said no problem.

Apple 11, the network at home, the memory still has 40G, charging mode.

Don't know. AnswerFirst of all, after we find that our Apple mobile phone can't update the system, we should consider whether there is a problem with our network, here open the phone's settings, find "wireless LAN" and click to enter. Then, in the Wi-Fi settings, we connect to the Wi-Fi network that we have available.

If it is not a problem with the network, then we go back to the "Settings" option and find the "General" item.

Once we are in the general one, in its options interface, we find the "Restore" option at the very bottom and click on it. Then, after we click on the Restore option, we go to the option and you can see a "Restore Network Device" and click on it.

Finally, after we click on "Restore Network Device", wait for the system to finish, and then go back to update the system to see if it's okay.

Summary. Hello dear, I'm glad to answer your questions The reasons why the iPhone system cannot be updated: 1. The memory of the mobile phone is not enough to meet the requirements of installing the latest system; 2. The mobile phone system configuration is too low to update the latest system; 3. If the phone is set to update when WiFi only, it may be because it is not connected to the wireless network and cannot be updated.

Hello dear, I am very sleepy and happy to answer your big questions The reasons why the iPhone system cannot be updated: 1. The memory of the mobile phone is not enough, and it cannot meet the requirements of installing the latest system; 2. The mobile phone system configuration is too low to update the latest system; 3. The mobile phone is set to update when it is only wifi, which may be because it is not connected to the wireless network and cannot be updated.

If you encounter a problem that you can't update when updating the system version, it is likely that it is due to a network problem. Choose to enter the settings interface of the phone, turn on the wireless LAN, then find the currently connected wifi, disconnect and then reconnect the wifi, or connect to the wifi network with a better signal, and then see if you can update the system. If it's not a network problem, take a look at how much memory space is needed for the latest iOS system version to be upgraded, and whether it's caused by insufficient space.

There's plenty of space.

Dear, then you can't update what is the tip.

Show me the screenshot.

It's just to show what the request update failed.

When Apple updates the system, it is a failure that may be caused by a network abnormality, just check the network environment and update it again. The specific insights are as follows:1

The Wi-Fi of the mobile phone will sometimes be in a false connection state or disconnected abnormally when you are not in use, you can disconnect and connect to it and then re-update the system. 2.You can reset the network settings in the general reset of the settings, and then initialize the network, connect to the wifi network, and then update the system of the mobile phone; 3.

Apple will usher in a **peak after the new version is released, and we can choose to miss the peak period, and we can update it again at around zero o'clock or even in the early morning. 4.Sometimes the apps running in the background of the phone may interfere with the update process, so it is recommended to close all the background of the phone before updating the phone system.

5.A large reason for the failure of the iOS system upgrade is the network problem, so when the upgrade fails to the iOS system, we have to replace it with WiFi, which is the first thing to do to upgrade the system, and it is also the most important step to determine the success of the system, and the stability of the network must be done well to complete the update. 6.

Finally, if it really doesn't work, we can connect to the computer through the mobile phone and update the mobile phone on the computer, although it is more troublesome, but it is more stable than the mobile phone update.

Reason 1: There is not enough space left on your iPhone.

When updating the iOS system of the Apple mobile phone, if you encounter a situation where the system cannot be updated, you must first look at how much memory space is required for the latest iOS system version to be upgraded, which can be viewed in the mobile phone software update interface. If the remaining space of the mobile phone is insufficient, we will also encounter the problem of failure when updating the system of the mobile phone. At this time, we need to check how much space we have on our mobile phones and whether it is enough to update the system.

Solution: Enter the settings of the iphone in turn, about the available capacity of the machine, after finding the available capacity option, the capacity displayed later is the remaining available capacity of our current mobile phone, if the remaining capacity space of the mobile phone is really not enough to install the system update, then we need to clean up the system junk in the mobile phone, unimportant**, documents, or** and other large-capacity files, so as to get more free space.

Cause 2: Network reasons.

If you encounter a problem that you cannot update when updating the system version of your iPhone, it is likely that it is due to a network problem.

Solution: Go to the Wi-Fi settings of your iPhone, then find the currently connected Wi-Fi, disconnect and reconnect the Wi-Fi, or connect to a Wi-Fi network with a better signal, and see if you can update the system.

Cause 3: The system version is faulty.

If you encounter the problem that you cannot update the iOS system of your iPhone when you upgrade it, it may be because the current version of your iPhone is in beta or beta and you have already installed a profile.

Solution: In this case, you need to delete the profile, so as to enter the phone's settings general profile file to delete. After the profile is deleted, restart your phone and go back to setting up Universal Software Update to see if the system is updated properly.

Summary. Dear, hello, now for you to carry out the following related answers: 1, the Apple mobile phone does not prompt the system update, it may be that the system is already the first version or the phone has been jailbroken, and it may be that the automatic update function is turned off.

2. The first thing is to check if it is the latest version of the mobile phone system, click Settings - General - About this machine - Version. 3. Jailbroken phones do not support system prompt updates. 4. Check whether the system update prompt is turned off and the update prompt is not displayed.

Click Settings - iTunes Store and AppStore - Update to see if the feature is turned off, resulting in no automatic update of system files, so the update prompt is not displayed. Hope mine can be helpful to you.

Can you elaborate on that a little bit more?

Dear, hello, now for you to carry out the following related answers: 1, the Apple mobile phone does not prompt the system update, it may be that the system is already the first version or the phone has been jailbroken, and it may be that the automatic update function is turned off. 2. The first thing is to check if it is the latest version of the mobile phone system, click Settings - General - About this machine - Version.

3. Jailbroken phones do not support system prompt updates. 4. Check whether the system update prompt is turned off and the update prompt is not displayed. Click Settings - iTunes Store and AppStore - Update to see if the feature is turned off, resulting in no automatic update of system files, so the update prompt is not displayed.

Hope mine can be helpful to you.

If there is a situation that cannot be upgraded, first of all, you must confirm whether your current mobile phone model is too old, if it is an iPhone4 or even earlier iPhone model mobile phone, then it is indeed impossible to update to the latest system, because the hardware can not keep up;

1. Check whether the remaining space is sufficient.

Before updating, we need to check that our iPhone has enough battery and that there is enough storage space. If the installation package is large, the update may not be successful if you run out of space on your phone**.

2. Check the network connection.

Confirm that you're connected to a stable Wi-Fi network. Before you update, make sure that your iPhone is connected to a stable network and can surf the Internet.

3. Understand the system version.

If you want to upgrade to the official version of the system, and the current version of your iPhone is in beta or beta, and you have already installed the profile and have not deleted it, you need to delete it in [Settings] - [General] - [Profile] on your iOS device, then restart the device and go back to [Settings] - [General] - [Software Update] to check again.

4. Confirm whether there is any shielding before.

If you have previously installed a profile and blocked the iOS update prompt, you also need to delete the profile in [Settings] - [General] - [Profile] on your iPhone, and view it after restarting the device.