I was hit by the car door next to me and my new car door has a small depression of 3 mm, very depres

If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

Similar to the one in the picture, it is generally about 300 yuan.

<> the picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the repaired body, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I suggest that you still go to the regular brand store to repair, so that the technical level will be *** and** fixed, unlike small shops that will only shout prices all over the sky.

If you see the perpetrator, let him pay money, but it seems that you don't see it, if there is surveillance, check the license plate number to solve the matter. If you don't monitor it, either fix it yourself or forget it, I promise you'll find out in two months at most, it's not a problem at all!

If it is because someone else accidentally opened the door and accidentally hit a small hole, then in this case, if it is not obvious or does not affect the appearance, you can temporarily stop it, because now it costs three or five hundred yuan to spray paint every minute.

And if you really want to repair it, it is recommended not to repair it yourself, but to go to a professional repair shop for repair. Because if the small pit appears on the door, the door lining should be removed and the sheet metal repair should be carried out from the inside of the door, so it is recommended to go to the repair shop more reliably.

In modern society, it is normal to bump and bump on the road, if your car accidentally scrapes a small pothole, what to do in this case? Here are a few tips for dealing with small pits:

1.The small pit on the door is relatively small, and you can't see it if you don't pay attention to it, so you can not get it first.

2.If it affects the appearance, it is recommended to go to the fast repair shop, if it is within the warranty period, you can go to the 4S point to let the professional see if it can be restored with a suction cup, if not, put it there and let the other party repair it.

3.Traditional sheet metal repair, sheet metal repair is to repair the deformed part of the metal shell of the car, such as the body shell is hit by a pit, you can restore it to its original state through sheet metal, and then through spraying special paint, the deformed metal surface of the car is restored to the same as other intact places, as bright as ever.

The way to deal with the car door being knocked by someone else is to:1. If it is simply recessed, the repair place can be sucked back directly through the suction cup, but it will be slowly restored.

2. If it is not serious, just simply recessed, you can wait and see, if it is not good, then go to the sheet metal, if it is seriously damaged to the bottom paint, you also need to spray paint.

By the way, share a few ways to prevent bumps: try to choose a place with a pillar to prevent one side from being hit, and the other side should be farther away from the car! Try not to stop in the middle, stopping in the middle is easy to be pinched left and right, and the probability of bumping is the greatest.

It is very important to control the lateral distance, sometimes the farther the distance, the greater the force, and if you can't stay away, you can simply stay close, leaving only a space to get on the car, so that the other party will not open the door so casually.

Need to go to the repair shop, **on, the car depression repair technology is determined according to the difficulty and area of the depression repair, as well as the sharpness of the depression, the sharper the pit repair, the greater the difficulty of repairing, and the more than a few hundred yuan. For example, a depression in the shape and size of an egg generally costs about 150 yuan.

The dent repair is to use a suction cup to suck out the depression position, then use the hook to reach behind the depression area, and then slowly eject it, and finally use a rubber hammer to treat the protruding part. The advantage is that they are experienced and can determine whether the depression can be repaired.

I also touched my colleague's car today, which is a little lighter than yours. He said he was going to the 4S shop to fix it, and then give me **. I said okay. I'm definitely responsible. But I don't feel very comfortable ... Is it necessary to go to a 4S store?

Only sheet metal spray paint! Car dent repair is too expensive! What is the material, iron or aluminum.

I can't see clearly, can I spray it again?

The car door depression can be repaired with a pit repair tension hammer, this hammer can replace the suction cup, suck the suction cup into the pit, hit the pull rod with a pull hammer, this force can pull the pit out, and it will be repaired, the specific operation steps are as follows:

1. Spray detergent on the door pit.

2. Apply glue to the middle of the pit.

3. The suction cups are also coated with glue.

4. Press this suction cup on the door pit.

5. Hang the tensile hammer and hammer backwards to pull the pit out.

The car door was knocked out by someone else's door, and the treatment method is as follows:1. The owner can use the traditional sheet metal repair method to repair the dents of the vehicle, and then carry out the paint repair treatment. Therefore, this method is generally aimed at deep dents, and the cost of maintenance is relatively high.

2. If the dent is shallow, the owner can use a suction cup to pull out the depression on the door, and the surface of the door will become flat. This method does not require touch-ups, but there may be traces of restoration.

3. If the dent does not affect the appearance, the owner does not need to repair it, and can buy some decorative stickers on the body to cover the dent, which is more beautiful.

1.Align the traction spacer coated with hot melt adhesive to the center of the depression and gently press it with your hand. ,.. after a few minutes

2.For the location, the tool hook can't reach in from the side, so you can only remove the door and find a suitable tool to prepare to remove the door.

3.First of all, remove a few fixing screws hidden in the interior panel, and then break the interior panel evenly and forcefully, and we repair the sharkskin dent.

4.The next thing is to dismantle the wiring harness, pay attention to remember the original position of the wiring harness and the corresponding interface, don't disassemble it when you ,.. a while

5.The interior is basically dismantled, so that the hook can reach the depression, and it is generally OK to find a special iron fixing bracket to fix the door ,..

This is easy, how big of a hole has your car been hit? Did the paint hurt the base paint? I'll tell you the best way to do it:

1- Remove the interior panels; 2- Slowly flatten the depression with a tool from the inside (this is very time-consuming, and requires skilled people to do it); 3- Use 2000 mesh sandpaper to sand the depression and slightly extend the grinding area to.

Hello, small depressions to be repaired in sheet metal, and then sprayed with paint. It doesn't affect the doors. If you don't understand it, please ask.

Hello! Re-sheet metal repair painting, hope it can help you.

This one needs to be repaired with sheet metal paint.

This is to do sheet metal repair, and then paint, what kind of car are you, give you a price.