Result oriented, fast execution, self driven, sharing and win win papers

To install the driver after the network is disconnected, you need to use a universal driver.

Take win7 as an example, the steps to install the universal driver when the network is disconnected are as follows:

1. Click on the computer system desktop to open the universal driver.

2. On the Universal Driver page, check the driver that needs to be installed.

3. Click one key to install, you can install the driver without the network.

Run the "Driver Genie" program in the computer that is not connected to the network, at this time the program will automatically detect the state of the computer that is not connected to the network and the installation of the network card driver, when the network card driver in the computer that is not connected to the network is not installed normally, it will pop up the driver *** image that matches the current computer network card type.

When the network card driver is installed, you can use the "driver wizard" to complete the drivers of other hardware in the computer under the condition that the computer is connected to the network normally.

06 Install the driver It is divided into 1-2 steps: 1. Plug in the network cable, hang up for 10 minutes, it will automatically install all the drivers for you; 2. Install the official special driver of the graphics card.

Use the drive disc that came with the computer you bought it.

1. Manually install the NIC driver.

1. Right-click "My Computer" - "Properties" - "Hardware" - "Device Manager" on the desktop, "Network Adapter", bottom.

That string of characters and numbers is the network card model on your machine.

Note: one is the driver suitable for the use of the network card, the second is suitable for the current system, and the third is to see when the driver software is announced.

2. Use the driver wizard to integrate the network card driver version and install it.

into a large number of network card drivers, open after installation, without the use of the Internet, it will scan the computer hardware, found that there is available.

The network card driver used will prompt the installation.

3. Try to surf the Internet, if it still doesn't work, it may be that the network card is broken, change to an independent network card, install the driver, and try to surf the Internet again.

Content from user: fengxuev

How to install the driver.

The computer will only be happy if all aspects of the hardware and software are installed and used, and the correct installation of your drivers is the basic guarantee for the normal operation of the machine. So what kind of installation do we need to install, is the correct installation? First, install the hardware driver you wish to install. Secondly, the drivers are all available after installation, and there are no resource conflicts.

Let's take the resemblance of an example:

First of all, the operating system is installed before the driver is installed, and before installing the operating system, you should think about what hardware you want to install. For example, if your motherboard has a graphics card, a sound card, and a network card, you don't need to install a network card, or you want to install a new graphics card or sound card, then you should adjust these in the CMOS before installing the operating system. I don't recommend installing everything you want to use and what you don't use, as this can easily cause system resource conflicts.

Motherboards with SIS chipsets should generally be aware of these issues, and VIA's chipsets usually support AC'97 sound system, you should also pay attention to whether to block it out.

Let's take the motherboard of the VIA chipset as an example to illustrate the steps of driver installation.

We want to install its own sound card, so before installing the operating system, we set it to use it in CMOS, which should be in the integrated peripherals in CMOS, and remember to set the ACPI (Intelligent Power Management Interface) in Power Management Setup to Enabled, so that the operating system can use the power management function. Once the operating system is installed, you will see it in Device Manager.

Click in turn: Start Menu - Control Panel - Device Manager - Network Device (Network Adapter), you can see that the wireless network card has an "exclamation mark" (!). or "question mark" (?)

Keep clicking Next and click Done.

Did you buy a wireless card?,If so, there is an installation disk.,Install the driver yourself.。

Then go outside and take a USB flash drive to test one and install it when you come back.

Hello, right-click "My Computer" on the desktop, find "Device Manager" and click and open;

Press Win7 [Start].

4.Then select and click Services under Services & Applications5, then find Remote Desktop Services and double-click on it.

6. Then we press [Start] and click [OK], and the mapping problem will be solved.

Hello, it's a pleasure to serve you, I hope my answer can help you, I hope I like it, please end the service automatically, thank you

1. Right-click on the desktop and click Personalize.

2. Enter the home page of the control panel and check: Management Tools.

3. Click to enter the management tool and find "Computer Management".

4. Click "Device Manager" to find "Network Adapter" in the sub-option.

5. Click on the network card driver below the network adapter, find "Driver" in the upper options bar, and then select Update Driver.

1. Right-click on the desktop "Computer", then select "Manage", and click "Device Manager".

Please use any driver software (360 Driver Master, Driver Genie, Drive Life, etc.) I will take 360 Driver Master as an example.

Open the interface, if your network adapter driver is not installed, it will prompt you to install it (I have already installed it so it is not prompted).

If you want to install, name it as a wired NIC.

Please find the key name Mac in the BIOS

LAN sets the value to auto. It may be that the NIC is blocked in the BIOS. The BIOS version of different motherboards is not the same, and it may not be exactly the same as I said.

You go to the next driver wizard, which has two versions. One with a network card driver, one without. You have a network card driver, and it will automatically install the driver for you after installation.

A network device driver is a small piece of information that is added to the operating system and contains information about network hardware devices. With this information, the computer can communicate with the network device. A network device driver is a configuration file written by a hardware manufacturer based on the operating system, and it can be said that without a network device driver, the network device in the computer cannot work.

The driver is an indispensable and important component. Whenever you install a hardware device that is not originally part of your computer, you will be asked to install a driver to connect the new hardware to your computer's system. The network device driver plays the role of communication, telling the computer system what the network device is capable of, and also communicating the system's instructions to the hardware to get it to work.

When installing, you need to install the network device correctly on the computer, the computer will automatically detect the new device after booting, after the detection, you need to insert the installation disc that comes with the network device, and then follow the steps prompted by the computer to install it.

A driver is a small piece of information that is added to the operating system and contains information about the hardware device. With this information, the computer can communicate with the device. The network device driver is the program that drives the network device.

As for installation, if there is a drive disk. After putting the disc in the optical drive, you're good to go. Then turn on the optical drive.

Double-click on the inside one"setup"The named file starts to install. If you have a built-in driver installation file on your computer. Double-click on it and you're good to go.

The common part is also the network card.,But you don't need to install the driver separately under XP.,Of course, the premise is that the motherboard driver should be installed.。