How to use CAD intelligent annotation elevation

The elevations in the architectural drawings are very heavy and we can use CAD to annotate them. So do you know how to mark the elevation in CAD? The following is my method of how to mark the elevation in CAD, I hope to give you an answer.

The method of marking the elevation in CAD After the drawing of the basic drawing, we can mark the elevation of the drawing, and the elevation annotation should be drawn in the floor plan, adjust the drawing to a top-down plan, and select "Symbol Annotation - Elevation Annotation".

Figure 1 of the steps to annotate elevations in CADTo annotate the elevation, we need to label first, in the pop-up settings window, we check "Manual Entry", and then enter "%%" in the elevation bar above

Annotate elevation in CAD Step 2After entering "%%", we will move the mouse to the appropriate position of Hetan Noise, and the system will automatically appear in the prompt style, select the appropriate position to click the mouse to confirm the input.

Figure 3 of the steps to annotate elevations in CADAfter determining the elevation annotation, we will let the random annotation of other locations, check off the option of "manual entry", and the system will automatically annotate other locations according to .

Annotate elevation in CAD Step 4After the elevation annotation is completed in the appropriate position, we have completed the annotation of the basic drawing and elevation, and the elevation marked on the top-down floor plan will not be displayed in the elevation, so it should be annotated separately when drawing the elevation.

Annotate elevation in CAD step 5

1. First of all, we open the CAD and find a slippery bend state drawing for a quick annotation demonstration.

2. Click "Annotation" and select "Quick Annotation" from the drop-down menu.

3. A desperate prompt appears on the screen, "Select the geometry to be labeled", we use the mouse to select all the figures, and after the selection, the lines that make up the graphics become dotted lines.

4. Right-click to confirm (or enter), the next thing on the screen is to specify the position of the labeling line, we can move the mouse to the appropriate position and click it. You can mark the elevation in the CAD.

1. Click "Elevation" under the CAD mechanical module

Elevation. 2. Click the left mouse button to select the annotation object, or right-click the mouse button (indicating the placement of any point), and the "Elevation" annotation dialog box will pop up;

Level Dimension Frame.

3. The program automatically measures the elevation value of the annotation point and displays it in the elevation value area, then selects the elevation type, and clicks the "OK" button; (Note: When elevating, one point is generally set as the reference point first, and then the elevation of other points is set first.) In this way, when other points are labeled, the program automatically measures the elevation values of the other points with the current datum point as 0 point.

4. Click the left mouse button to specify the label position.

Example: <>

Level instances.

Make your own elevation symbols and annotate.

If it's Tianzheng, there is it inside, there is it in the menu bar on the left, and the symbol label is selected to mark the elevation.

What do you mean? To be specific, I don't know what you want to do.

CAD drawings want to annotate, we can use intelligent annotation, intelligent annotation is the ability to recognize the intelligent creation of graphics, let's take a look at the detailed tutorial.

1. First of all, let's take a look at the opening method of intelligent loose grinding and beating. We can find them in the ribbon first.

2. Of course, we can also open it through the command line, and the specific shortcut command is dim.

3. For example, if we want to mark the radius or diameter of a circle, we just need to select the smart annotation, then place the mouse on the circle, and the radius or diameter will be displayed automatically. When the mouse is moved to the inside of the circle, the radius will appear and the diameter will be shown on the outside. Click the marker, and then click the left arrow.

4. Next, select the location and direction of the label. Once selected, click the left mouse button again to select it, and the annotation is complete.

5. When annotating a line, for the same reason, click the first endpoint, then select the second endpoint, and then move the mouse to determine the location of the callout you want to confirm.

6. In addition to quick annotation, we can also select various annotations in the menu bar to meet our daily needs.

1. Double-click to open the CAD software on the desktop.

2. Find the block in the upper toolbar, click the small triangle below, find the definition attribute icon, click to open the "Property Definition" dialog box, and set the properties.

3. Set the mode to verification, enter the mark bar in the property box: elevation, enter the elevation value in the prompt field, enter the elevation value in the default field: 0, and other settings are as shown in the figure, click OK to place the word elevation on the triangle.

4. Select the elevation drawing and the defined attributes, press the shortcut key B, press Enter to confirm, pop up the block definition window, name the block, and then specify the base point, as shown in the figure, define the base point as the point below the triangle, and click OK.

5. After defining the tile, select the tile, right-click Mintan to select the blocker in the list, click, enter the blocker, double-click the elevation font, pop up the attribute definition window, in the default bar, right-click, select the insert field.

6. In the pop-up field window, find the object, click the Qiao Beitong formula below the object, and <>

7. In the formula window on the right, right-click and select Insert Field.

8. In the pop-up field window, also select the object, block placeholder, select the location in the right list, check the y coordinate for coordinates, and click OK.

9. Close the blocker, double-click the elevation just now, pop up the enhancement attributer, enter the elevation value in the middle below, and you can see that the data on the elevation symbol has changed. Save the elevation file, and then you can roll the elevation annotation of the drawing.

10. Complete the renderings.