Detailed steps on how to flash headlights in a car

When driving at night, it generally involves the use of lights, and flashing headlights does not make much sense when driving during the day.

There is a lever (light lever) on the left for turning on the lights, left and right turn signals, high and low beams, etc. To use the headlight skill, you need to hook your finger on the light lever and gently pull it back and forth. The light turns on when the lever is hooked, and the lever will automatically pop back when the finger is released, and the light will go off at this time, so that the back and forth dial a few times is completed"Flashing headlights".

It's very comfortable to use, don't use it with fast hands. The average person can learn it in 30 seconds when they get on the bus.

Please click Enter a description.

Now I'm going to talk about the places where you need to use alternate flashes when driving at night.

1.When there is a car in front of you and you need to overtake the car in front, flash your headlights to make the vehicle in front pay attention to the car behind you and be prepared to "do something" and drive carefully.

2.When the intersection is ahead, alternate high and low beams to let vehicles and pedestrians who are about to enter and exit the intersection notice that there are vehicles about to pass through the intersection and pay attention to safety.

3.When there is a pedestrian in front of you with his back to you, flash your headlights to tell the pedestrian that there is a car behind you to pay attention. When necessary, you can honk the horn to remind you.

This doesn't mean that you can scatter if you want to, because this one needs to be installed, you can go to the car maintenance place and let the staff help you install one.

Double flashing:

Turn signal:

When the car turns the direction, it is divided into left turn signal and right turn signal, and when it is turned on, the light keeps flashing to attract the attention of surrounding pedestrians and vehicles and prevent safety accidents.

Fog Lights:

It is used in rainy and foggy weather, and its main feature is that it has strong penetration in rain and fog with low visibility, reminding the vehicles behind to pay attention and preventing rear car collisions.

Marker light:

Also known as the wide lamp, small lamp, after opening, the contour width of the warning car to the surrounding car, it is a warning sign of the car lamp.

Daytime running lights:

The main function of the driving lights during the day is to remind the opposite vehicle or pedestrian that a car is coming. Not all cars have daytime running lights, some have, some don't, daytime running lights don't have a switch, as long as the engine is on; If you turn on the other lights, the daytime running lights will turn off automatically.

1. Clean the central control position of the car

Use a clean soft gel. This software is chosen because the interior of the central control of the car is relatively irregular, and it is difficult to clean the position of the void, and the cleaning glue can solve this problem.

2. Clean door interior:

Cleaning solution + towel. The cleaner can dissolve the dirt on the car door, and then wipe it off with a towel, and the effect is still relatively good.

3. Cleaning of the interior of the car roof:

Cleaner + brush. Since the roof is relatively not so dirty, you can spray it with detergent, then use a brush to sassafras, and finally wash it with a towel.

4. Steering wheel cleaning

Cleaning foam + towel. Since the steering wheel is leather, the foam cleaning method can avoid damage to the leather material, and the effect is still relatively good.

Will there be lights Generally, the headlight switch on the lower left side of the steering wheel can be pulled upwards as a whole.

This is the lever on the left side of the steering wheel, and it is OK to hook it a few times with your hand in your arms

The lights used for car overtaking are as follows:

1. Turn on the left turn signal and overtake;

2. Alternately use high and low beams to indicate the car in front and the oncoming car on the opposite side, by repeatedly moving the light control lever inward;

3. After overtaking, turn on the right turn signal and turn back to the original lane.

Precautions: 1. Overtaking should be carried out under the condition of ensuring safety, and there is no possibility of meeting the opposite car.

2. When the car in front is turning left or overtaking, you cannot overtake.

The operation method of flashing the headlights twice: the car driver will break the headlight handle in the direction of the driver when starting the car, the headlights will be on, and the hands will be extinguished, and the headlights will be broken twice when they flash twice.

When we are driving on the road at night, we will see a car with its high beams on the opposite side, and the driver will flash the lights twice to remind the other vehicle to turn off the high beams. At night, the high beams of the oncoming car will make us unable to see the surrounding road environment, and for our safety and as a courtesy, it is perfectly fine to flash the headlights twice.

For everyone, when we are driving, we actually need to understand some theoretical knowledge. And sometimes, parking itself also needs to comply with relevant laws and regulations and traffic rules, and some people will have such doubts, that is, how to turn on the double flashing lights of the car? In my personal opinion, there is usually a sign of double flashing lights in the car.

We just need to press this switch, and we should also use the light correctly, let's take a closer look.

1 Press the switch

I used to take the driver's license test, it is subject two, we all have a certain understanding of this double flash, we all know that when entering the rain and slippery wet road, we have to turn on the double flash, and also to honk, at that time I actually think that this project is very difficult, but after a long period of practice, I think there are still certain ways and methods, if the car wants to turn on the double flashing lights, we directly press the switch of the double flashing lights to lose. However, there will actually be some differences in the double flashes of each car, and we should do a good job of distinguishing them.

2 Use lights properly

In the process of driving, in fact, the use of lights is also a very important thing, because we are not able to greet others in the village, so in order to be able to better remind the other party, we can only use lights to distinguish, for example, if we want to stop in an emergency, we should press the double flashing light. So when we want to do something abnormal, we have to turn on the corresponding lights.

Therefore, we should pay more attention to this aspect of the problem in our daily life, and it is beneficial for everyone to understand this aspect of the problem, and because sometimes, if we do not turn on the double flash when parking, then when there is a traffic accident, we need to be responsible accordingly, so I think the correct use of lights is very important for each of us.

Double flash on the air conditioning panel, it is a triangular red switch, in the middle of the instrument, when the visibility is less than 100 meters, just click on this switch.

Personal access to information, the double flash switch is a little special, it is independent, and the double flash switch logo is particularly obvious, a red triangle. The common double flash switch is located on the center console on the right side of the steering wheel, but there are also some models that have a double flash switch located under the center console. Just press the red triangle double flashing light and it will turn on.

When the headlight handle is pulled in the direction of the driver, the headlight will turn on, let go and then turn off. Break twice with two flashes.

The question of how to display the car's flash and how to turn it on. He also collected information on how to display the car's flash and how to turn it on. Let me share it with you.

1.There were no flashing lights in the car. It should be a double flashing of the car, a hazard warning light. If the car is in difficulty, drive it, and put a bracket behind it to remind the rear car.

2.Dual flashing lights can be used when parking or when visibility is less than 100 meters.

3.It can also be used in special cases. For example, if there is a sick person or a pregnant woman in the car, you must immediately go to the hospital to use the hazard warning lights, and ask the traffic police to help open the way. The hazard light is a key light that can be used freely when using the car during normal use.

4.The car with a flashlight was modified by itself. If caught, they will be punished. Using a flashlight while driving can make noises sound to other vehicles or pedestrians.

I hope it helps you through this article, and this is the end of the article.

1. The danger warning flash is commonly known as the double flashing light (or double jumping light), this kind of light is set up for safety reasons, but in the life of my Zhaolun, many people in Shenhong understand it as a "privilege light". In fact, the misuse of double flashing lights is a traffic offense punishable by a fine of up to $200.

2. There are two main situations for the abuse of double flashing lights: first, several cars traveling together, such as outing, picking up relatives, and leading the way; The second is to be in a hurry and want to drive fast. The first scenario is quite common, I've been to many test drives organized by car manufacturers, and the organizers have asked us to turn on the double flashing lights, in fact, this is very inappropriate.

3. In fact, according to the regulations of traffic management, there are several situations in which double flashing lights can be used: when driving in road conditions with visibility less than 100 meters; When the vehicle breaks down on the road or is involved in a traffic accident; When towing a faulty motor vehicle, the towing vehicle and the towed vehicle should turn on the double flashing lights at the same time; When making a temporary stop on a road or highway.

4. In addition, when stepping on the brakes, you should also turn on the double flash guessing lights, especially on the highway, to avoid the occurrence of rear-end accidents as much as possible.