The network cable that the company switch comes down and connects to the wireless router LAN port co

Summary. Hello! Glad you chose to use the Ask Us Consulting program! Thank you for your trust in us! Here I join hands with the vast number of askers, staff and answerers. Thank you from the bottom of my heart!!

For this question you asked, our system has assigned you the most professional answer, the next 5 minutes, he will answer your questions relatedly, because the current number of consultations is large, please be patient. You can review your question, complete the information, or add a description of your question.

Can I connect a network cable from a switch to a wireless router?

Hello! Glad you chose to use the Ask Us Consulting program! Thank you for your trust in us!

Here I join hands with the vast number of askers, staff and answerers. Thank you from the bottom of my heart!! For this question you asked, our system has assigned you the most professional answer, the next 5 minutes, he will answer your questions relatedly, because the current number of consultations is large, please be patient.

You can review your question, complete the information, or add a description of your question.

Hello 1 can set the network sharing mode, the following is the specific method. 1. Connect the WAN port of the wireless router with the LAN port of the switch, and each computer is connected to the LAN port of the wireless router in a wired or wireless way.

2. Wi-Fi for connection. 2. Enter the "Network Parameters" setting interface of the wireless router, check "Set other assigned IP address information through dynamic IP allocation", and click the "Save" button. 3. Select whether to enable the DHCP server function according to actual needs.

4. Settings. Can the network cable from the switch be connected to the router, I want to use 2 computers.

The address of the wireless router's LAN port, switch to"Set the LAN port"tab, check the "Enable DHCP server" item, set the IP address range, and click "Save"."Button. 5. Switch to "Wireless Network Settings.""- "Wireless Encryption Settings" tab, where you can set the "SSID" and "Password" information of the wireless WiFi, click "Save"."Button. 6. Cut.

How to click on the home page.

Know that the platform reminds you] The first related question of this question has been resolved. If you still want to have your current teacher service, you can ask your current teacher how to upgrade your service. Six rounds of service consultation, unlimited round service, voice service and other ways.

Can you use a wired router?

It works.

The network cable connected by the switch can be connected to the wireless router to achieve wireless Internet access.

To achieve this function, you must know in advance the Internet access mode of the network cable connected to the switch, whether it automatically obtains the address or fixed IP, and then you can set the WAN port parameters of the wireless router you want to access.

How to set up the router to be connected:

1. Log in to the management page of the router, enter the WAN port configuration, and set the Internet access mode according to the network cable from the switch, and automatically obtain or fix the IP.

2. Set the LAN IP address segment of the wireless router, note that it cannot be in the same network segment as the original switch.

3. Then, set the SSID and password of the router.

4. Save the settings and restart the router.

OK. <>

How to make a switch:

Key +R to pop up the running interface, enter cmd, and press enter.

2.On the command indicator page, enter ipconfig to find the gateway.

3.Open your browser, enter the gateway address, and log in.

4.Enter the main interface, because modifying the LAN port IP may be restarted, so here first turn off the router's DHCP service, of course, if you don't feel that it is troublesome to restart, you don't need to do this step, click "DHCP server" "DHCP server settings" "do not enable" "save".

5.Later, modify the IP address of the LAN port.

Tips: After the DHCP service is turned off and the IP address is modified, it means that the computer cannot automatically obtain the IP address when connected to the router, and you need to set a fixed IP address to log in to the router. In addition, if the LAN port of the computer is set to be bent, the IP address of the computer must be set to this range before you can log in to the router.

The network cable connected to the switch can be connected to the wireless routerHow to set up a Level 2 router.

1. How to connect two routers.

1. There is a cat (modem): cat (modem) - router 1wan port; Router 1LAN port --- router 2WAN port; The 2lan port of the router --- the computer.

2. No modem: network cable --- router 1WAN port; Router 1LAN port --- router 2WAN port; The 2lan port of the router --- the computer.

Second, the setting method.

Before setting, disconnect the WAN port cable of the second router and plug it in after the setting is complete.

1. Set the IP segment of the second router.

After restarting the router, the address to enter the router is.

2. Set up a second router to access the Internet.

Check the IP details of the computer connected to the first router. (win+r--input, cmd--input:ipconfig all [remember: ip, mask, gateway, dns]).

Set it on the second router, and select Static IP in the Setup Wizard. Enter the IP that the 1st router does not use, and the others: mask, gateway, DNS settings are the same.

Restart your router once it's set up.

3. After restarting the router, the setting is completed, and the line of the 2WAN port of the router is reconnected to make the router 2 network normal.

Yes, you need to give the wireless router an IP address, which is a usable IP address that is connected from the switch. Ethernet cable The WAN port to be connected to the router.

OK. But you have to know what the IP segment of the root router is.

Bind the IP and MAC of the wireless router to the static IP list of the root router, and then set the PPPoE to manually obtain it in the wireless router. Fill in the IP address and subnet mask specified by the root router and the gateway. The subnetwork segment of the wireless router should not be the same as the setting of the root router, as it may be confusing.

This connection is called bridging.

Some wireless switches and routers are auto-bridged and can be plugged in at the LAN port.

The first method: dynamic IP mode.

1. Plug in the router, don't connect the switch first, reset the router (restore the factory);

2. Connect the computer to any LAN port of the router and enter the setting page;

3. Set according to the dynamic IP;

4. Then set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the switch to the WAN port of the router.

The second method: wireless AP mode.

1. Connect the computer to the LAN port of the router and change the IP address of the router. For example, most router addresses are, we just need to change the router IP address;

2. Turn off the DHCP function of the router in the settings;

3. Finally, connect the network cable from the switch to the LAN port of the router (any one is fine), note that it cannot be the WAN port.