How to make a wireless router a switch, how to use a wireless router as a wireless switch

Why turn a router into a switch? How can you go online when you become a switch?

Like the upstairs said, you just need to set up all the machines in the same network segment, x 2 to 254).

The other gateways, masks, and whatevers are filled in the same way as the machine above you, and there should be no problem.

Still, you said it"Static IP"I don't know who you mean? Do you mean the landlord? In addition, you better tell everyone who you have connected to this hub, if you are saying that this total port is using a static IP, then it stands to reason that you can only use the router, and there should be no more than two other direct connections on the hub.

Wireless routers look like the laptop can get DHCP through authentication after searching for a signal. So the wireless router just needs to be set up on it (if it's ADSL).

Two notebooks are in a network segment.,Both can be accessed through a wireless router.。

DNS uses the local ISP.

..The concept is not clear.

Use a notebook to enter.

Put these parameters:

ip: subnet mask:

Gateway: Preferred.

Alternate DNS:

Just set it up to a wireless router.

You can look it up on the Internet, I forgot about it.

If the existing network equipment is wired equipment, the mobile phone and computer cannot access the Internet wirelessly, but it is inconvenient to directly disassemble and replace it. In such an environment, it is necessary to use the additional wireless router as a switch (also known as a wireless AP). Here are some of the methods I have compiled for you about the use of wireless routers as wireless switches, I hope it will be helpful to you!

Wireless routers are used as wireless switches in a method

1. Log in to the router.

Power the router that needs to be used as a switch (do not connect to the front-end network for the time being), connect the computer to the LAN port, enter it in the browser and enter the management interface.

2. Modify the wireless signal.

Go to Wireless Settings >> Basic Settings and set the Wireless Network name in the SSID number.

Go to Wireless Security Settings, select WPA-PSK WPA2-PSK, and set a wireless password of no less than 8 digits in PSK Password.

3. Shut down the DHCP server.

Click DHCP Server and select Disable.

4. Modify the management address.

Go to Network Parameters >> LAN port settings, and change the IP address to be in the same network segment as the LAN port IP of the main router but does not conflict.

For example, if the IP address of the front-end router is set to, then the IP address of the wireless router is changed to be between 2 and 254). Save and restart your router.

5. Connect to the Internet.

Connect any LAN port of the router (that is, interface 1 and 4) to any LAN port of the front-end router. Desktops that need to access the Internet can be connected to any LAN port to access the Internet, and the wireless terminal can search for the set wireless signal to access the Internet.

There should be only one network port for Internet access in your dormitory, and the computer can access the Internet by connecting to this network port, and there is no need for a router, if this is the case, you can do this: first of all, you have to set your router's working mode to AP mode, and set the LAN port address to an address that does not conflict with your school's IP as the management address, the gateway does not need to be set, the mask is used, this address is only used as the management address of the router, and it does not work at all when you surf the Internet. Then shut down the DHCP server of the router, and don't let it assign an IP, otherwise other people may not be able to access the network management of the network school and come to you for trouble.

At this time, the wireless router becomes a wireless AP, and you give the SSID a name in the wireless settings, and then add a password. Use a network cable to connect this network port on the wall with the LAN port of the router, and the remaining LAN port is connected to the computer for use, and the laptop is connected to the wireless and the wired connection is exactly the same, and the account must still be used separately. I don't understand what you mean by the wireless signal that you can use one account for multiple people, but my understanding is that your school allocates an account, so you still have to have one account per person, whether wired or wireless.

Campus networks generally do this, if this is not the case, then you have to explain the situation first and I will give you an analysis.

1. The school's network cable is connected to the LAN port of the router, and the router is configured with an unused address of the school, and the gateway is configured as the gateway that the school can access the Internet.

2. Enable wireless broadcasting and encryption;

If you do both of the above, you can use the router as a transparent switch.

First of all, the router can be used as a switch, and the bus is also plugged into the LAN port, and other users are also plugged into the LAN port, so that each user has to access the Internet with his own account. As you said in your question, the bus is plugged into the WAN port, and you can use your classmate's account to log in to the Internet in the router, and turn on the wireless function for others to access the Internet wirelessly. (You can only use one account to log in to the Internet in the router.)

Is it shared with the Internet? That's what routing does. The router should have a graphical interface, so set your dial-up account and password in it, and dial automatically. In the future, devices connected to the router will not need to dial up directly, and multiple people can share the Internet.

Requires a wireless router to have this feature.

Successfully tried, Method: 1The router enters the line from any LAN port, and the other ports are connected at will (not connected to the WAN port); 2.Router settings: Disable DHCP and set dynamic links to save. It was that simple.

Settings:1First, connect the computer to the LAN port of the slave router, and change the IP address of the slave router to a different network segment address, as long as it is not in the same network segment as the main router. For example, most router addresses are, and we just need to change from router address to one;

2.Then turn off the DHCP function from the router in the settings;

3.Finally, connect the network cable from the main router to the LAN port of the slave router (any one is fine), note that it cannot be the WAN port.

This method can be connected to 6 computers at the same time!

Pull the line from the outer bedroom and connect it to the lan port, and you're done. Your network cable is also connected to the LAN port. Just set your NIC IP address to get it automatically.

Try to change the IP of several computers to static.,And the IP of the router.,Don't be the same as the settings of the system server.,For example, people are.,Your router is changed,,,How many of your computers are changed.。。。