Billiards aiming method, the best aiming method for playing billiards

Updated on physical education 2024-03-04
8 answers
  1. Anonymous users2024-02-06

    1. Aiming through the apex of the cue ball is not easy to use at all, such as how do you hit the off-ball?

    2. The high rod is not conducive to positioning, the specific situation is analyzed, if it is a small platform, the low rod is more important.

    3. The best aiming method is the tutorial, when the cue ball collides with the target ball, the target ball will go in the direction of the line of the center line of the two balls, find the center point of the cue ball at this time, and then aim here, if you don't use it well, you can only say that you don't work hard enough.

    4. If you want to hit accurately, you must first have a correct posture, and then practice with standard methods.

    5. No matter what method is used, it is not important to make rapid progress, the important thing is that this method has potential, and then you can still rise again when you rise to a certain extent, it seems that only the traditional method can do, otherwise it will not be able to go up to a certain extent, and it will be very troublesome to change it.

    6. Again, the shortcut to improving your level is to practice and practice, and the posture standard is far more important than the aiming method.

    There are still a lot of masters, and I have seen national players answering questions.

  2. Anonymous users2024-02-05

    You ignore the cue ball and suppose you hit the target ball directly and hit the point that goes into your target pocket, and then you hit the point of your goal ball with your cue ball.

    As for positioning, it is necessary to take into account many factors such as the strength of the blow, the rotation of the contact surface between the cue ball and the target ball, etc. Let's gain experience little by little. Or spend money to find someone to learn.

  3. Anonymous users2024-02-04

    It's very simple: when you set up the illusion ball, you can see the angle by looking at the route of the goal.

  4. Anonymous users2024-02-03

    That's right, you don't care about the aiming point, first take a beer bottle and poke the hole with a pole, don't touch the mouth wall. When you don't touch it basically, I'll teach you how to find the hitting point.

  5. Anonymous users2024-02-02

    The most awesome aiming method for playing billiards: tail finding method, re-method, symmetry method, double weight method.

    1. Find the tail method

    As shown in the figure, ball A represents the mouth of the bag, ball B is the target ball, ball C' is the moment when the cue ball contacts the target ball, the position of the cue ball, and the C ball represents the cue ball. Now to hit the B ball into the pocket, you just need to determine the position of the center of the C ball on the table. How do you know for sure?

    We first need to look at the point of contact between the C' ball and the B ball, which is easy to determine.

    Then, follow the direction of the target ball into the pocket, extend the distance of half a ball backwards, that is, the point C' to be targeted. After finding the C' point, you need to draw the CC' line in your mind, that is, the ball line, and then hit the ball in the correct position.

    2. Re-legalization

    The so-called re-legality, as the name suggests, is to determine the ball line according to the degree of coincidence. Determine the angle between the two lines of the line AB and BC, and then determine the line according to the relationship between the middle angle and the degree of coincidence.

    Note: It is useless to remember the angle, sometimes the actual 30 degrees when playing is different from the size of the 30 degrees we understand. Unless you remember a few specific angles, say 15 degrees, 30 degrees, and then offset on top of that.

    3. Symmetry method

    Symmetry is a proven method, especially when playing a ball from a reverse angle. First, connect the pocket A and the target ball B, and then find the contact point X between the cue ball and the target ball at the moment of contact. Secondly, with the cue ball as the base point, we can roughly look at a line, which coincides with the line segment AB, and the intersection point of this line and the cue ball is the x' point.

    Just look at the x point on the target ball and the x' point on the cue ball, and let the two points touch after the ball is released.

    4. Double weight is legal

    First, similar to the previous description, find the x-point first. Secondly, you can judge the distance m between the point x on the target ball and the edge. Finally, take the edge of the target ball as the reference and extend the distance of two m in the direction of x, which is the distance between the cue ball and the target ball.

  6. Anonymous users2024-02-01

    1. The basic operation of billiard ball aiming: hit the target ball with a white ball to make it fall into the bag. As shown in the figure below, the center point of the bag mouth and the center point of the target ball draw a straight line, and the intersection point of this straight line and the outer circle of the target ball is the collision point, and the white ball can be hit into the bag after hitting this point accurately.

    2. The basic principle of billiards aiming: three points and one line. As shown in the figure below, when the cue ball aiming point, the target ball impact point and the center point of the pocket are in a straight line, hit the center point of the cue ball, and the ball can be easily scored.

    3. As shown in the figure below, according to the principle of three points and one line, draw a straight line perpendicular to the goal line at the aiming point, and within 180° of the right side of this straight line (the yellow line in the figure), as long as the aiming point is accurate, the ball can theoretically be put into the bag. (Note: This is not the white line that is traditionally thought to be drawn at the point of impact of the target ball).

    4. The coincidence proportional method requires a certain degree of abstract ability. As shown in the figure below, a solid ball is placed in the position of the imaginary ball, and when you lean over to aim at the imaginary ball, it is like a circle falling on another circle.

    5. As shown in the figure below, after removing the imaginary ball (red ball), it becomes such a position relationship, and the white ball just covers half of the basketball.

  7. Anonymous users2024-01-31

    The real aiming method of billiards: aim while lying down, and hit hard with the lever.

    1. Look at the goal point of the batted ball first, and then stand at the position where the cue ball is aimed at the goal point of the batted ball.

    2. Lie down and aim, if you feel bad after lying down or feel that you are not aiming at the goal point, then you must stand up and lie down again. If you have to hit it in an awkward position, it is almost impossible to score a goal.

    3. After standing in a good position, twitch a few times back and forth, feel whether the dribble is smooth, and then pause the clubhead infinitely close to the point of the cue ball to be hit, and then look along the rod to see if it is sure that it can hit the goal point of the batted ball.

    4. After the above process is confirmed, the lever comes back and determines the distance of the lever with the strength you are ready to use, then pauses and looks along the rod again (the rod, the head, the cue ball hitting point, the goal point of the hit ball) in a straight line.

    5. Then keep your eyes on the goal point of the ball being hit and make a shot.

    Other methods:

    Angle aiming: The point where you want the target ball to enter the pocket in the middle of the pocket to make an extension line pass through the center of the target ball to the other side of the ball, which is the point where the cue ball is in contact with the target ball, that is, the goal point. The so-called re-legality, as the name suggests, is to determine the ball line according to the degree of coincidence.

    Determine the angle between the two lines of the line AB and BC, and then determine the relationship between the middle angle and the degree of coincidence.

    Imaginary ball aiming: make the extension line from the center of the target ball into the pocket mouth to the center of the target ball and pass through the target ball with one more ball position, imagine that there is a ball sticking to the outside of the target ball and the center point is on the extension line, from the subjective perspective of the target ball, the extension line made from the mouth of the target ball into the pocket just passes through the connected target ball and the imaginary ball, and the cue ball hits the position of the imaginary ball, that is, the goal position.

  8. Anonymous users2024-01-30

    Aiming skills. 1.Stabilize body posture:

    Stabilizing your body posture is the first step to achieve good aim. Try to keep your body quiet (e.g., keep your feet in a line, be steady, don't shake) and don't make a sound. This allows for better concentration and is not easily influenced by the outside world.

    2.Be accurate in your line of sight: It is important to keep your gaze constrained to the cue ball, between the position of the target ball and the bag of the ball.

    Don't hit the ball blindly or in a hurry. This process may take some practice and time to adjust your gaze. When you aim at the cue ball, it is best to use a vertical line to aim at the position of the target ball.

    3.Use smaller side angles: Another technique for aiming at the Ashram is to use a smaller side angle to avoid putting weight on the side you want to hit. The resulting lives** can be better targeted and more accurate.

    4.Preparation time: Finally, it is important to master the preparation time. If you need to aim for a few seconds, then aim for a few seconds. It is important to note that if the time is too short or too long, the shot may be missed.

    5.Find the cue ball and the target ball you want to hit, and stand behind the cue ball in the correct position. Observe the relationship between the mouth of the bag where you want the target ball to go into the pocket and the angle of the target ball, and look close to the target ball for a long distance.

    To pocket the ball, make an extension line from the middle of the hole, from the middle of the target to the other side of the ball. Once aligned, breathe smoothly so that the outshot hits smoothly and smoothly.

Related questions
7 answers2024-03-04

It's about looking at your own feelings, don't blindly imitate others. >>>More

4 answers2024-03-04

First of all, I will tell you what are the basic skills of billiards, which are basically divided into followers, shrinking rods, fixed rods, deviating rods, etc. >>>More

7 answers2024-03-04

Like friends to share, add follow.

8 answers2024-03-04

1.Players must run five or six steps from the edge of the penalty area. >>>More

25 answers2024-03-04

Actually, I think sandpaper is the best.

It's good to grind it smooth. >>>More