How to solve the problem that the U disk PE system cannot find the U disk letter?

This is still your USB disk drive problem, now it is SATA hard disk, if the drive is incorrect, if it can't be displayed, there are two solutions, one is to enter the BIOS to change the hard disk to compatibility mode, the other is to redo PE, find a PE system compatible with SATA hard disk.

I use Chinese cabbage pe, he has a high compatibility mode that can be used.

Cause analysis: 1. The U disk is plugged into the interface, but the PE system cannot recognize the interface.

2. The system does not correctly assign the USB drive letter.

Solution: 1. The new models are configured with interfaces at the same time, and the U disk is plugged into the interface;

2. If it still doesn't appear, right-click on the computer and select "Management" - "Disk Management"; 3. Right-click on the USB flash drive or removable device, and select "Change Drive Letter and Path"; 4. Click the "Add" button; 5. Assign the following drive letter drop-down box, select a disk symbol, such as E or H, etc., and make sure that the above is the solution for the U disk PE system to find the U disk letter, and users who encounter this problem can solve it according to the above steps.

Method. First, right-click on "Computer" on the desktop and select the "Manage" button.

Please click Enter a description.

A Computer Management window pops up.

Please click Enter a description.

Then click on "Disk Management" under "Storage".

Please click Enter a description.

Then double-click on the right side of "Disk Management" and select the USB flash drive letter you just inserted.

Please click Enter a description.

Use a USB flash drive. After entering the PE, the crafting tool shows that there is no hard disk, here you can store the system in a small SSD first.

After that, repartition the hard drive within the system. The specific steps are as follows:

1. First of all, after the system installation is completed, enter the desktop, right-click on the computer, and select Manage to enter.

2. Click Disk Management on the left side of the management interface.

3. Find the disk you want to partition.

4. Right-click the disk and select the compressed volume.

5. Enter the compression wizard, click to enter the size you want to partition, and click OK. Hail Pure Waiter.

6. The partition is successful, and you can see the new area.

7. Next, right-click on the partition and select New Volume.

8. Enter the new wizard and click Next.

9. Then click on the next step of the pants, which are all defaults.

10. Select the drive letter of the new partition and click Next.

11. Select the drive letter name and format, and click Next.

12. When the partition is completed, click the Finish button to complete the partition.

13. At this time, you can turn on the computer and see that the disks are presented.

14. The computer can also be used normally.

We recommend that you use Disk Wizard on the PE page to repartition and try again.

This problem is that the computer hard disk mode is incompatible and the system cannot read the corresponding driver, after finding the problem, enter the BIOS settings to modify the hard disk mode.

1. Restart the computer, and press the corresponding shortcut key to enter the BIOS setting interface after the boot screen appears. Generally, the shortcut keys to enter the BIOS setup interface are either DEL, F2 or F1, and users can try them one by one. Once you are in the interface, switch to "Advanced Menu" by the left and right arrow keys on your keyboard, and then move the cursor by moving the up and down arrow keys to select "SATA Configuration".

2. Then press the enter key to open the SATA Mode Section window, you can see the IDE and AHCI options, here, we select the IDE option, and press the enter key to confirm, and finally press the F10 key to save the modified settings.

3. After the above operation is completed, you can see the computer hard disk when you finally re-enter the PE system, try it first!

Change an installer PE, good compatibility, I myself am the installer PE without advertising and no binding.

Does the motherboard recognize the hard drive before entering the PE? Maybe it's the hard drive data cable and the power cord is loose. Reboot after shutdown.

When entering the system, you must select the latest computer configuration to enter.

Changing the cabbage pe is simple and easy to get, and that's what I use.

PE system is a Windows pre-installation environment, widely used in U disk or disc installation, by making a U disk PE boot disk can easily take heavy liquid to set up the system, but some users can not find the U disk letter after entering the PE system, what is going on? Next, I will analyze the reasons and solutions for the PE system to not display the USB flash drive.

Cause Analysis:1. The U disk is plugged into the interface, but the PE system cannot recognize the interface.

2. The system does not correctly assign the USB drive letter.

Workaround:1. The new models are configured and interfaced at the same time, and the U disk is plugged into the interface;

2. If it still doesn't appear, right-click on the computer and select "Management" - "Disk Management";

3. Right-click on the USB flash drive or removable device, and select "Change Drive Letter and Path";

4. Click the "Add" button;

5. Assign the following drive letter drop-down box, select a disk symbol, such as E or H, etc., and OK.

The above is the solution to the U disk PE system can not find the U disk letter, and users who encounter this problem can solve it according to the above steps.