How did the DJ erase it, and what principle did that eraser use?

reloop: You can go back to the previously set loop an infinite number of times.

Loop Cutter: Press this key in the loop state, and each time you press it, the length of the loop will change to the original 1 2. (The minimum is one frame).

Hot Loop: Press this key in the loop state to cycle back to the beginning and start again.

Turn the Jog Dial to create a wide variety of sound effects like vinyl.

Jet: Create an effect sound like using two vinyl records to get the sound of an engine.

WAH: Locate the strength of the sound of a particular instrument to create the feeling of being moving.

HOLD function: When opened, the jogging disc can be maintained even if it is stopped. When it is turned off, it will slowly return to its original state.

Cycle speed control range: Fine-tuning can be made in units in 6 ranges and in units in 10 and 16 ranges.

Master Tempo: A key that allows you to control the tempo without changing the intervals.

CUE Point: Set the CUE point in increments of 1 75 seconds.

Back que: Go back to the set cue point and start over from there.

Auto Cue: Skips the silent part of the track before it starts.

Anti-skipping design: Optimal anti-skipping design is achieved by adopting two structures: "anti-skipping sound memory" and a floating structure used in car audio.

resume function: After the platter is ejected, a re-inserted platter can return to the same state before the platter was exited.

Friction. Not very expensive.

You're going to do that?

The so-called DJing is to use a professional machine to seamlessly connect several dances or songs with completely different rhythms, melodies, moods and styles, and process these dance music.

DJing is a DJ using professional machines such as DJs and mixers to seamlessly connect several completely different electronic dance music such as rhythm, melody, mood and ** style, and process these electronic dance music. Generally, DJing is done in nightclubs, bars and other places. DJs use their hands to pull and stop or make the disc spin faster, so that some songs with different rhythms become a rhythm.

Or use the hand control to let the head scratch around on the disc, because it is actually easy to hurt the disc and the machine, so it is called DJing.

Drop principle: DJ is the DJ who pulls and stops or makes the disc spin faster with his hands, so that some songs with different rhythms become a rhythm. Or use your hand control to make the head swipe around the disc to change the tempo.

DJ. They like to use mixers and mixers. Generally, artists who do house, dubstep, drum & bass** will meet DJs, and DNB artists will also use drum machines.

There is also a software auto tune that changes the human voice, and there is also a voice-changing hardware talkbox, which is generally a robot sound.

How does it work, anyway, none of the equipment used by DJs doesn't use electricity, but it can't be like a folk guitar and a drum kit.

The disc is mainly based on the dance steps of the main dancer of the dancing silver pond, and changes according to his rhythm, the dancer dances according to the melody of the main song of Lu Yuan, and the accompanying cover DJ rubs out a strong rhythm according to the dancer's skillful dance steps.

Rubbing dishes is to follow the feeling of walking in a sedan car, when you are very excited, no matter how you wipe it, it is very tasteful. When you're very lost, it takes 1-2 hours to find a sense of spring attack when you have a brother, and you don't even feel it all at all.

Layman's explanation: (so that you can easily understand).

Usually, when DJ masters DJize, they use two DJ players! Add a mixer. Commonly used DJs: Pioneer 800 Pioneer 1000

DJ DJ is to combine two different ** songs together, even two ** with different rhythms!

Scratching is to adjust the rhythm of **. and progress.

The procedure goes like this::

One machine puts a** and the other machine puts b**.

But the machine that played b** turned off the sound, and only a** was heard on the spot.

DJs use headphones to listen to b** and a** (which is why DJs often use only one ear to listen to headphones).

Then adjust the rhythm and progress of b** by rubbing the butterfly to make it consistent with the rhythm and speed of a** on the scene! The perfect combination.

Then slowly amplify the b** through the mixer, and slowly decrease the a** at the same time (at this time, the two songs with the same rhythm are heard).

When the volume of b** is turned on to the maximum, and at the same time a** is turned off (only b** can be heard on the spot).

OK, a simple skewer is done.。。 Hehe!

At this time, the DJ master will take out the disk of A** from the machine, replace it with the disk of C** and repeat the above steps. (It's coming out of the continuous skewering**...)

The headphones are plugged into the mixer and can be adjusted to choose which machine to listen to.

I worked in a disco and was obsessed with DJs for a while... I'm trapped to death, and I'll type it out for you word by word! If it weren't for my love of DJ, I would have gone to bed a long time ago. Hehe!

Of course.. Helping others is still my ultimate intention :)

Good! Well said! And BPM to be consistent!

- -I don't understand what you're talking about.

Now there are very few scratching fields, if you want to learn LP, it is difficult to learn well, if you want to learn LP, the most basic thing is to learn the use of the machine, and it is proficient in using it, and practicing scratching is not a matter of one or two days.

DJing is when DJs use their hands to pull and stop or make the disc spin faster, so that some songs with different rhythms become a rhythm. Or use your hand to control the head to swipe across the disc to change the pace.

Professional DJing machines seamlessly connect and process several dances or songs with completely different rhythms, melodies, moods and styles.

We generally listen to not scratch discs, one of the two discs ** can be heard, there is one put you can't hear, through the headphones to the rhythm of the two discs, the drum beats are aligned, and then pick up the song, that's it. It's the mix.