How to solve the unstable FPS value of Play CrossFire 20

CF is not like CS, but CF ping and CS ping are in the same category, both are related to network speed (the speed at which network packets are sent, received, and processed. Of course, the faster this speed, the better the internet speed. The faster the network speed, the lower the ping (the two are inversely proportional), the smoother the picture, and there is no delay (the picture is lagging"zi"belt).

If the ping in CS is too high, you can also make corresponding adjustments on the computer (that is, the frequency lock and hz that are often said to play CS"Hertz"But CF's design dictates that his ping can't be connected to those FM tools!

However, it is recommended to go to the next tool, which is dedicated to locking ping or hz frequency locking tools in CS, and the effect of the two is similar. It would be helpful to use it to lock the computer and ping as much as you want (if it's a flat monitor, it will definitely be of great benefit, ping can change, fps.)

I can lock it at around 100). Use the "Approximate Method of Locking FPS:

1] Go back to the blank space on the desktop, right-click the mouse - Properties - Settings - the color level is 16 (provided that the monitor supports this color bit, otherwise the screen will be black) - Advanced - Monitor - remove the tick - point triangle drop-down and select 100 Hz - OK - OK.

2] Open this tool of **, and the diagram dialog box appears: "The x and y vertical columns correspond to the resolution, and the frequency vertical column corresponds to the hertz" (there are three monitors in the drop-down triangle: 0001-Plug-and-Play Monitor 0002-Plug and Play Monitor 003-Plug and Play Monitor.)

The usage of three is the same, the effect is the same, and the effect of three at the same time is better).

1: Pull the scroll bar to find the resolution that the computer monitor can support (flat"A monitor like a TV"Generally, 800x600 and 640x480 resolutions are used, and the liquid crystal is generally 1024x768, 1024x780).

2: Enter 100 in the frequency column and the box corresponding to the selected resolution or your monitor can support Hz "General notebook is 60, LCD is 75-85, and flat can support 100Hz".

In this way, the Hz is forcibly locked at 100, which promotes the acceleration of computer data transmission and the increase of network speed.

1. If the graphics card driver is faulty, we can use Master Lu to detect whether the computer supports CF, or enter the graphics card panel - adjust the image settings through the preview - use my preferences - focus on performance - apply - close. Use the driver wizard to fix the graphics card driver.

2. If you have a lot of shortcut key icons on your desktop, it will also cause FPS instability when playing CF, and the solution is to sort out and delete some useless icons. Then set the refresh rate of the monitor to 85MHz, and the default of the computer is 60-75MHz. How to set it up:

3. If the above operations can't solve the problem, then use Master Lu to make a one-click optimization, clean up the temporary files in the login CF.

Analysis: I have encountered a lot of work and summaries in my daily work.

Full screen. or window.

in-game. Users whose programs are popped up and minimized are found to have such problems caused by other processes popping up in the background and running. It may be a plug-in, an auxiliary or even a virus, or it may be some software from the user.

So our solution priority is: clean up the process, artificial viruses.

Environment: WindowsXP Win7

Tools: System ** Optimization Package, 360 Game Optimizer (recommended boot), Game Optimizer (recommended boot software.

Little helper. llfix

Patch. Group Policy.

Action: Group Policy: Modify Group Policy Computer Configuration - Administrative Templates - Network - QoS Packet Scheduler - Limit Reputable Bandwidth - Enabled - Set value to "0".

360 Software Assistant: Install and open the "360 Software Assistant" on your desktop - one-click acceleration.

360 Game Optimizer: Turn on 360 Security Guard - Features.

Daquan. Game Optimizer.

Once opened, optimize it right away.

Master of Game Optimization.

Master of Game Optimization.

There could be the following reasons:

The next time the game is updated, it will be stable.

Suggestion: 1: Clean up the cache of the computer, 2: The antivirus software will kill the virus and restart it.

3:CF has a game repair can.,You find a repair.,It's going to be more stable.,Recently, a lot of friends fps are unstable.,It's been fed back to the official.,The next update will be adjusted by the official.。

The video memory of your configuration graphics card is a bit low, it is recommended to replace the graphics card with large video memory, and playing games will be more stable.

It may be due to a conflict between the graphics card and the computer system, and the solution is more complicated than the details.

Your problem is the same as mine, but I've solved it... My machine configuration is CPU: AMD5000+ Graphics: 8500GT RAM 2G (1G before, the same is true for FPS).

First of all, I'll talk about who this FPS has the most to do with · · CPU processing power · NO2 graphics card.

My motherboard has an energy-saving automatic downclocking 5000+ to drop me to about 30 when I didn't pay attention to the fps...

I found out that after the motherboard adjustment, the automatic downclocking was turned off, and the fps was not bad after recovery, between 60-70·· Later, I overclocked a little bit and now the CPU clock speed graphics card is still 8500 memory, 2G fps, 80-100 blast mode, 8v8 time...

The solution... You have to see if you can configure it first. You say 100+ is *v*? 8v8 is not bad· 1v1 That's not good· Check your CPU frequency first and see if it's right. Look at the next software··· For example, the cpu-z Master Lu is good·· And then if you can figure it out yourself, you will figure it out by yourself, and if you can't find it, you will not understand it, and then ask to be hehe

The graphics card can't support such a big one·· Desktop Properties, Settings, Advanced, and then look for the graphics card column.

Then turn off the vertical synchronization of the graphics card, turn off the 3 first, adjust the screen brush to 75 (LED display), if it is CRT, you can adjust it to 85-100, and finally enter the game, and reduce the picture effect inside

First of all, you set up your graphics card!

Desktop Properties, Settings, Advanced, and then look for the graphics card column.

Then turn off the vertical synchronization of the graphics card, turn off the 3 first, adjust the screen brush to 75 (LED display), if it is CRT, you can adjust it to 85-100, and finally enter the game, and reduce the picture effect inside

Antivirus, and then the next optimization master optimizes it, and if it doesn't work, reinstall the system again.