Computer hardware failure There is a problem with the hard disk Endangering data security Whether th

Since you can see this prompt, it means that the hard disk is still in use, otherwise the system will not boot up, and there will be no such prompt.

1. When this problem occurs, the system detects that there is a problem with the hard disk, prompts and notifies the user, and rescues important data as soon as possible to avoid greater losses;

2. The first task to do is to transfer the important data files in the hard disk to the mobile hard disk for storage. Or attach a hard disk and copy the data for backup. Of course, you can also use the ghost tool to clone the data image completely;

4. If the hard disk is a mechanical problem, there will be a loud "click, card" sound, and its life is up, change the disk.

It's broken, there should be a bad sector, you'd better find software to check it, and then send the following diagram to see if it's a logical or physical bad sector. Logical bad sectors can be fixed, but physical bad sectors can't be helped.

1. The hard disk makes a clicking noise. This is the most intuitive feeling after the head is damaged, and the normal hard disk will also make a weak sound when it is working, but it needs to be distinguished in a very quiet environment, which is a normal phenomenon, and users do not need to worry. However, the sound of a damaged hard drive head can be heard even in noisy environments.

2. The hard disk does not rotate after turning on or spins for a few seconds. The hard disk does not rotate when it is turned on, which is mostly caused by the failure of the motor or circuit board; The automatic shutdown of the hard disk is mostly due to the automatic shutdown of the disk to protect the disc after the head is damaged, which is common in Seagate and Samsung hard drives.

3. The system blue screen prompts related errors**. All three** indicate physical damage to the drive, such as bad sectors, corrupted firmware, or faulty heads.

4. The BIOS does not recognize the hard disk. There are many reasons why the hard disk cannot be identified, and the common faults are bad sectors, firmware damage, head motor failure, and burning of the electric scrutiny front circuit board.

Hi Format Data Recovery Master is a powerful, simple interface, and simple to operate data recovery software. It supports the recovery of hard disk files deleted by mistake, disk formatted by mistake, memory card data deleted by mistake, files emptied by mistake, and hard disk files after the hard disk partition disappeared.

If the software is not opened, it will go wrong for no reason, and the machine is very loud.

My hard drive has bad sectors, and if you're not sure that your hard drive actually has bad sectors, don't try to fix it

When you open a disk (with bad sectors), the hard disk will make a "special" sound, and you will basically know that it is a hard disk ringing sound as soon as you hear it! ~

1.When the hard disk is running or copying a file, it is possible that the operation will not be successful for a long time, or it may make some abnormal noise, or the system will simply prompt that the file cannot be read or written.

2.Every time the computer is turned on, the disk scanner runs automatically and reports that there are incorrect sectors.

3.The computer cannot boot from the hard disk when it boots up, or it cannot operate the hard disk after it starts. This is a more serious bad sector.

The above 3 points are the symptoms of a broken hard drive, is this the case with yours? If not, you should consider if something else is broken ...

1.The common phenomenon of hard disk failure is that it is easy to blue screen when booting or running, but it can still enter the system. This problem is generally relatively easy to fix, mainly because of the system partition problem.

We open the DOS command prompt window and enter the command "chkdsk c:f r x" to force the fix:

2.Since it is repairing the system partition, you need to restart the computer to repair it.

3.Individual minor problems can also be successfully repaired with some repair software. Here we recommend you to try DiskGenius first. To avoid false positives, we recommend that you first execute "Check for partition table errors" in the Tools menu.

4.If there is no repair, then execute the "Bad Sector Detection and Repair" function in the "Hard Disk" menu

5.If there is a problem with the hard disk during the boot process, it does not need to be detected and repaired here, otherwise it will take a long time. Once you've set it up, you're ready to "start detection" and "try to fix":

6.If the problem is more serious, you can use a more specialized tool to detect it, and it would be best if it could be fixed

Female Lu Qi Coca-Cola looked at La.

2.Use a professional tool: If the hard drive fails, you can use a professional hard drive repair tool to repair the eraser. This tool can detect faults in the hard drive and fix them.

2.Circuit faults: Circuit components in hard drives are also prone to failure, such as power supplies, capacitors, etc. This failure usually results in the hard drive not being able to power or read data properly.

2.Use a professional tool: If the hard drive fails, you can fix it using a professional hard drive repair tool. This tool can detect faults in the hard drive and fix them.

2.Circuit faults: Circuit components in hard drives are also prone to failure, such as power supplies, capacitors, etc. This failure usually results in the hard drive not being able to power or read data properly.

3.Replace the hard drive: If the hard drive cannot be repaired, then the hard drive needs to be replaced. When replacing a hard drive, you need to pay attention to the model, capacity, and interface of the hard drive to avoid compatibility issues.

3.Logical faults: Logical components in hard disks, such as partition tables and file systems, are also prone to failures. This failure usually results in the hard drive not being able to recognize or read data properly.

1. Hard disk circuit failure The spindle motor stalls, causing howling.

With the hard disk instruction calendar light flashing continuously, the error message "1701" or "hard disk error" is displayed during the self-test, which means that the hard disk control circuit is faulty. Hard disk circuit faults account for a small proportion of the statistics of hard disks, and they are generally exposed to the self-test process, and the fault phenomenon is relatively simple.

Failures of read and write control circuits occur at the same time, and there is almost no read-only (write-only) or write-only (write-only) phenomenon.

2. Hard disk cavity failure After the machine is powered on, the hard disk cavity makes abnormal noise, and there is an obvious "da-da-da" long-term head "crash" sound during the self-inspection process, indicating that there is a mechanical fault in the hard disk cavity after the machine is rotten. This is mostly due to the loosening or breaking of the head stepper steel belt, and the failure is caused by a severe impact or vibration of the disc body.

3. Hard disk adapter.

Or connector fault: When the system is powered on and self-test to the hard disk subsystem, the self-test cannot be passed, and the hard disk approval light is not lit and the screen displays the following information: "1701,hard disk error" or "HDD controller error" This fault phenomenon is not the main boot record of the hard disk.

Damage is a hardware failure of the hard drive subsystem. For example, the hard drive adapter card, the hard drive is damaged, or the hard drive adapter card is damaged or in poor contact with the motherboard o-slot and the connectors and cables connected to the hard drive.

4. Hard disk cylinder.

Corrupted After a long period of self-testing, the hard disk displays the following message at boot: "Disk boot failure track 0 bad" If it freezes immediately thereafter and causes boot failure, it may be that disk 0 cylinder is damaged. The result is that the main boot sector of the hard disk, or the DoS boot sector, is corrupted and the hard disk becomes unusable.

Although this fault is a physical fault, it can be repaired by software.