-
Anonymous users2024-02-051. You hook this hard disk to other computers to do slave disks, and see if you can find them when you self-check the computer, 2. If you find them, enter the system to see if there is a disk letter, if not, open the PQ partition program to see if you can detect it from the disk, 3. If you can't do it, please enter the control panel--- management tools--- computer management--- point "disk management" to see if there is a detection of the disk, 4. All of the above are invalid, and they basically have to be repaired!
-
Anonymous users2024-02-04The motherboard is short-discharging to see if you can find the hard drive? If not, most of them are disk error, press any key....It can be sent for repair or repaired.
-
Anonymous users2024-02-03No reaction at all should be bad contact... It's hard to say the specific reason, so let's find the nearest computer repairer and ask. Maybe it's good for people to move the line. Generally broken, it should not be a little unresponsive.
-
Anonymous users2024-02-02It shouldn't be useful, so take it to a place that specializes in repairing hard drives.
-
Anonymous users2024-02-01This is usually when the system detects that the hard disk has a read and write failure. There are two types of read and write failures: logical and physical, i.e., one is a software problem and the other is a hardware problem.
Logically, try to repartition the hard drive and reinstall the operating system, you may be able to repair the physical one, make a backup of important data, and the hard drive may stop working at any time.
There is a problem with the hard disk, which will not affect the normal use for the time being, it is recommended to back up the system image and important data in advance, just in case.
Hard disks can be used for various reasons, and there is a logical or physical damage to the track.
You can use the ghost cloning software under PE to make an image backup of the system for saving the system after a system crash.
Hard disks are valuable, data is priceless, so use the computer elegantly, do not use the hard disk to read and write in a vibration environment, so as not to damage the hard disk tracks.
Install the necessary firewall and anti-virus software to reduce the damage caused by viruses to system files and hard disks.
For hard drives that are already having problems. Tracks can be detected and attempted under PE using DiskGenius software.
-
Anonymous users2024-01-31How to solve the problem that the computer often does not recognize the hard disk failure.
-
Anonymous users2024-01-30Detailed steps: <>
2. After the software finds out the data, it will be placed in the same directory as the label name of the disk to be recovered.
3. Tick the files that need to be recovered, and then click Save in the upper right corner and save as button to copy the files on the check.
4. Wait for the program to copy the data to solve the problem.
I don't know if the landlord asks about the hard disk damage is hardware or software, the software damage will generally occur, file loss, capacity size display error, partition loss, program operation is not normal and other phenomena. If the hardware is on, there is generally an abnormal sound of the active motor of the hard disk, an abnormal sound of the servo motor of the magnetic head, a power-on and boot display that the hard disk or the hard disk partition with boot data cannot be found, abnormal entry into the system, abnormal file reading and writing, etc. Generally speaking, the hard disk is a relatively durable part, and the probability of physical damage to the hardware is not high, but this is a delicate thing, and the distance of the head suspended on the platter is calculated in microns, so it is particularly afraid of vibration, and the violent vibration will cause the head to hit the platter, resulting in disk data loss and physical damage. >>>More
It's actually very simple, it's not a problem at all, just wait a little longer when you turn on the next time you turn it on. If you are automatically connected at boot, it is recommended to cancel the automatic connection, which can basically be solved. Because my family does this a lot, and now it's done.
Repair it with Super Bunny's IE repair tool.,If it doesn't work.,Reinstall IE If you can, call a friend who will help me in this area I'm limited in ability.,I hope you're so good!!
Are you sure it's the most recent machine? Also don't know what system your machine comes pre-installed? You try to enter the BOIS to adjust the mode of the hard disk,Generally the default is SATA,You can change it to the IDE to try it Very old version,You use it on the current computer hard disk at will,It's easy to turn the hard disk into a corpse But this will affect the read speed of the hard disk It is recommended that you go to the nearest after-sales service to install a system It is better to give some money than to do it yourself
Easy recovry,Go to the Internet to find a Chinese version,The original location of the deleted file is not covered by a new file to be retrieved,If new data is written,It's definitely not fully recovered.,It's up to your luck.。