How to maintain an electric shaver to prolong its lifespan

Regarding the maintenance of shavers, the following points should be noted:

1.Clean the cutter head frequently, but take special care not to injure the blade when cleaning. A brush can be used along the blade to remove lint and then sprayed with cleaning and disinfectant lubricant to keep the blade sharp.

2.The cutter head should be close to the best to achieve the best effect. When using, it is best to keep the angle of the shaver and ** 90 degrees, so that the head can be unhindered to the beard to achieve the best shaving effect.

3.The most common way to clean the bits is to rinse with clean water. When rinsing with clean water, it is best not to touch the shaver body with water to avoid mechanical failure. If you are using a wet and dry product, the base should still not come into contact with water to avoid damaging the motor.

4.Do not use an electric shaver with insufficient power, as using it too hard will cause internal wear and tear on the electric shaver's motor.

5. After the razor is used for a period of time, mites may breed on the blade head. In order to avoid the appearance of mites, the electric shaver should be used for about two weeks, and it should be used for about two weeks, and it should be carried out to kill mites: unscrew the cutter head, take out the blade, sweep off the beard stubble, and then drip half a drop of wind oil essence on the knife head, be careful not to drop the wind oil essence on the rotating shaft, and then put the razor head well.

The special smell of wind oil essence and the active ingredients in it are the nemesis of mites, and its oily state will not make the blade rust, and at the same time, it will not affect **.

Attention should be paid to the use of razors:

1. Because the face will expand slightly after washing the face, it is best to shave before washing the face, and it is the ideal time to shave after getting up in the morning and before washing the face;

2. When using a mesh razor, please keep the shaver perpendicular to your face and hold the shaver at a 90-degree right angle.

3. Because the beard grows downward, the stubble can be shaved backwards to make it erect and easy to shave, so it should be shaved from the bottom to the top;

4. When shaving, pull it tightly by hand, do not push the cutter head vigorously, just gently slide over the beard area to shave the slag clean.

Don't charge it often, just fully charge it before use, and be sure to use it up for the first time before charging. The best cutter head cleaner is water. When rinsing, it is best not to touch the shaver body with water to avoid mechanical failure.

If you are using a wet and dry product, the base part should still not come into contact with water to avoid damaging the motor. Hope! Thank you!

The razor is a kind of shaving appliance that is often used in life, because it is also a consumable, so many people have the question of replacing the electric shaver every few years when buying and buying a razor. So how many years does an electric shaver change? How long does an electric shaver generally last?

Here's a summary for you.

The electric shaver is changed every few years

At present, most of the best razors on the market have a life span of 2-3 years, and it is recommended that the blade and knife mesh (knife film) be replaced every two years in order to maintain the original state of the shaver. The most important factor in achieving a clean shave with an electric shaving potato or knife is the tip of the knife. If the cutter head is not replaced for a long time, the effect will be affected.

The razors on the market today can be broadly divided into turbo type, staggered type and retina type.

How long does an electric shaver generally last?

How long an electric shaver generally lasts depends mainly on the quality of the razor you are purchasing. If the quality is poor, it can not be used for about a month, and if it is not, it can be used for four or five years. So if you want to buy an electric razor, you must buy a big brand, so that you can use it for a longer time.

Electric shavers use pay attention to the jujube cavity item

When shaving, the fixed blade should be slowly pushed towards the face, in the opposite direction of the beard's growth, allowing the beard to enter the mesh smoothly. In addition, since the electric shaver is directly attached to us, it is recommended that you do not share the electric shaver with others, as it is easy to spread diseases if you scratch the skin. To pay attention to cleaning and maintenance, you can use Braun reciprocating shavers, which are durable and made in Germany, and are equipped with an intelligent cleaning center.

1. First of all, it is necessary to clean the electric shaver frequently, and the most common way to clean the head is to rinse it with water.

2. Before rinsing with water, see whether it is a full body wash, otherwise rash rinsing may damage the shaver. This is followed by regular lubrication.

3. Regularly apply a little knife lubricating oil on the inner surface of the outer cutter head. Some rotating parts such as internal knife support shafts or motor spindles also need to be lubricated. This protects the sharpness of the shaver.

4. Then use wind oil essence to kill the virus, after the electric shaver is used for a period of time, mites may breed on the blade head. For this reason, after two weeks of use of the electric shaver, unscrew the blade, take out the blade, sweep off the stubble, and then drip half a drop of wind oil essence on the head to kill mites.

1. The electric shaver must also be maintained, after each use, take off the mesh frame, gently tap a few times in a flat place, and then reinstall it. After each cleaning, the protective cover should be placed on the upper blade to prevent damage to the omentum, and if you wash the shaver with water frequently, you must apply a small amount of light motor oil to the omentum head and sideburns trimmer every week.

2. The head of the electric shaver should be replaced after a period of use, so that in order to protect the high level of the product to achieve the best effect, an electric shaver must be replaced with the omentum after about one and a half years of use.

3. After the electric shaver is used for a period of time, the cutter head must be cleaned, and the cutter head should be cleaned with a small brush, and never use a small brush to clean the omentum inside the electric shaver, which can easily damage the omentum. The cutter head must be cleaned every four weeks. After removing the mesh frame, spray a special spray cleaner five centimeters from the omentum, and then use a small brush to remove the scum from the blade.

In order to ensure the effectiveness of use, it is recommended to replace the cutter head and oment film every 18 months. The above is an introduction to how to maintain an electric shaver.