Should the new mobile phone be pasted with tempered film, should the original film be torn off?

If you are using a vivo mobile phone, it is recommended to remove the original film of the mobile phone and then paste other films.

Can be torn off. The film that the new machine comes with when it leaves the factory is not a film in the real sense, just a PE film, the main purpose is to ensure that the screen is not easy to scratch in the process of the mobile phone from the factory to the packaging. In addition, after time of storage, this thin meter will lose its adhesion and is easy to tear off on the screen.

The original mode has a layer of protective film, when pasting the new mobile phone tempered film, the original protective film must be removed, and the new film can be re-pasted in the future, so that the tempered film can better protect the mobile phone, and the contact surface with the mobile phone will be more consistent, and the use effect is better.

If you replace the tempered film for the mobile phone, of course, you have to tear off the old film before, otherwise you will repeat the film, and it will also affect the beauty of the mobile phone.

You don't tear off the original protective film of the mobile phone, if you put the film on it, it doesn't make sense, the original film also has the function of protecting the screen, if you want to change the film, it must be to tear off the original protective film and then replace it.

It will be better to tear it off, and if you don't tear it, the tempered film will thicken the screen, and the sensitivity of the touch screen is not so good.

The old one must be torn off, otherwise it will be useless to stick the new one.

Peel off the original film, wipe the screen clean with a film applicator, and apply the film.

If you buy a new mobile phone, in fact, the film on the new mobile phone can be torn off to paste the tempered film, because many times the tempered film can actually still have a protective effect on the mobile phone screen, and choosing to paste the tempered film is also a very good choice, especially the new mobile phone can play a protective role, which can make you more at ease.

There are four main materials for mobile phone film in mobile phone beauty: PP material, PVC material, PET material and ARM.

The PP material film is relatively soft, and the light transmittance is also very poor, which can not play the role of anti-scratch and anti-wear, and can only prevent dust.

PVC material film is relatively soft and easy to paste, but it is relatively thick, and the light transmittance is not very good. And if you tear off the film, it will leave residual glue on the mobile phone screen, which will affect the appearance.

The PET film has high light transmittance, and there is no residual glue after tearing off, and it is not easy to appear small bubbles in the middle of the film. However, the high reflectivity of this film will cause users to not be able to see the words on the screen clearly, and it is easy to leave traces such as fingerprints on the surface.

It depends on what kind of mobile phone you are, if it is a straight plate, you can remove the tempered film. If it is a curved screen, the best is the original film, and the others are not as good. However, not every brand of mobile phone will be filmed at the factory, and some will paste a process film.

It depends on what type of mobile phone it is, whether it supports under-screen fingerprints, etc., which will affect the film.

Generally, the mobile phone you just bought has a layer of protective film that comes with it, which can also play a certain role in protecting the mobile phone, and you don't need to change the film immediately. However, the quality and feel of the mobile phone film that comes with it are not very good, and users can replace different types of mobile phone films according to their own needs.

If you buy a new mobile phone, you can change the tempered film immediately. Because he does not affect the use. It can also protect your phone's screen very well.

It's better not to, he has a soft film on his phone.

No. Otherwise, it will damage the surface of the phone.

Yes, I've always changed the tempered film as soon as I bought it, and I was afraid that I would feel distressed if I fell, and then I started to guide the data, and I would also put the phone case.

Hello, according to your problem, of course, you can remove it and re-paste it, but we need to pay attention to the following problems when removing the pasted film.

Please pry it slowly from the edge of the film with a thin sheet or directly, and then quickly uncover, this process must be stable and fast, otherwise it is easy to cause dust accumulation on the screen or screen.

If it is only the screen that has air bubbles, please do not remove the whole film, uncover the part with the cheongsam, and gently absorb it with scotch tape, tear it off, and then re-attach it.

The key to this is to see the quality of your tempered film, the tempered film I pasted in Huawei mobile phone company can be torn off and repasted, because he has a free machine for pasting tempered film in that place, which can squeeze out all the bubbles inside, and paste it very flat, I pasted it there there.

Not really。The service life of the original film is short, and it is recommended to buy another tempered film.

Newly bought mobile phones will have a factory nano film, thin does not play a role, but when you first buy a mobile phone, merchants will say that the mobile phone film that comes with it is better, you don't need to change the film immediately, but the nano film is not fall-proof, whether to change the tempered film can be decided according to personal needs.

Mobile phones are generally pasted with tempered film, because they are more drop-proof, and the mobile phone case needs to be purchased a shell that is higher than the edge of the mobile phone, if the mobile phone case is too thin, the edge of the mobile phone is also easy to break.

The new machine purchased will generally have a layer of disposable plastic film, which can be removed when used.

When the mobile phone leaves the factory, the screen does not have a film, but please rest assured that the screen of the machine has been tested for scratch resistance before leaving the factory to prevent wear and tear within the normal operating range, and it will not affect the use without film. However, the film can effectively avoid some sharp objects from causing direct damage to the screen, and you can choose whether to apply the film according to your personal preference.

Whether consumers want to apply tempered film in the end depends on their usage habits. If the tempered film will not affect the normal use of the mobile phone, then it is understandable that the user wants to provide more protection for the mobile phone.

1. The paste can be pasted, and it is estimated that the paste is not firm, but it is not necessary, because the tempered film has several layers, the bottom layer is the silicone layer, and the top layer of the silicone layer is an explosion-proof layer, and the explosion-proof layer is the same as the ordinary film, so it is redundant to paste the ordinary film. It is best to tear off the ordinary film and then paste the tempered film, otherwise it will affect the touch screen insensitive.

2. The tempered film itself is to protect the mobile phone screen from being scratched by hard objects, and now a PET protective film is pasted to protect the tempered film. Putting too much protective film on the phone will cause the touch screen of the mobile phone to fail. Ruchun Hu Yuguo does not affect the touch function of the mobile phone, depending on personal preference.