Shoe identification quality method, how to identify shoe quality problems

In terms of appearance, the quality of shoes is mainly identified by the quality of shoe materials (including upper, sole, and inside) and workmanship. The size can be measured, and the process is mainly visual, hand touching, pinching, and pushing.

1 Upper (upper).

The upper is one of the main components of the shoe. For smooth shoes, it is necessary to see whether it is soft and plump, after pressing the upper with your hand, whether there is a loose surface, a good upper should be plump and soft, comfortable to feel, uniform and consistent luster, and no loose surface. For the upper of suede shoes, care should be taken to check whether the pile is short and even, and its tone should be consistent.

The inside of the shoe is the part of the upper of the shoe, which is used to strengthen the upper, prevent the upper from extending and deforming, and improve the feel of the foot. Therefore, a good shoe material (such as a genuine leather shoe) should have a good touch, breathability and moisture wicking, and is not easy to discolor. In sewing, there should be no wrinkles and fat edges in the shoes.

Shoes. Shoes. 2 Insoles. Usually men's shoes have a back-half pad or heel pad for the insoles. Women's shoes are fully padded with an insole cover.

The insole has the effect of keeping the insole clean and covering the unevenness of the insole to improve the feel of the foot. Therefore, the insole should have good moisture absorption and wicking properties. In terms of workmanship, the insole should be flat and adhered to the insole without hanging folds.

3 outsole. Outwardly, the bonding state around the outsole should be tightly bonded without voids, and the bottom surface should be flat.

4 heels. Whether it is a low heel or a high heel, the first thing to see is whether it fits naturally and flush with the shoe. For women's shoes with a half-heel or higher, the following two points are more important:

One is that the heel should fit securely on the insoles. Swinging back and forth, left and right, should not be shaking; Second, the palm surface should not be smaller than the bottom surface of the heel.

5 insoles. On the one hand, look at the material of the insoles, preferably leather. On the other hand, it is better to press the waist gear with your hand, which is equivalent to the part of the instep when wearing shoes. Under the action of this force, if the edge of the shoe is deformed, it means that the quality of the shoe is problematic.

6 Stability.

Put the shoes on the plane, the shoes should be stationary immediately, such shoes are stable, which is also one of the basic conditions for high-quality shoes.

There is a lot of glue at the junction is not good, at first glance, the workmanship is very rough, easy to break, brand-name shoes, the joints are very smooth, and you can't see the glue exposed outside.

No, it's just not pretty! There are many differences in the quality of shoes! The outsole can not be opened, the heel can not be crooked, the back bag, the heel height should be matched with a pair, the upper cleanliness should be good, the inside can not be played zou, the middle leather can not be opened and the glue is overflowing, and the high heels must be locked nails....

A good pair of shoes first look very clean at first glance, the second is to see the workmanship, whether the line is smooth or not, the third is to see if the material is damaged, the fourth is to break the heel with your hand to see if it is shaky Fifth, if you can wear it yourself, fit it to see the comfort Sixth, when you buy the goods, you must take each pair apart to see if it is matched with a pair, whether there is a size problem, whether there is a color difference problem, and the seventh billing should indicate the matters if there is a broken heel and how to return it.

The identification method of shoe quality problems is as follows:

See if the upper and bottom of the shoe fit completely, whether there is open glue, and whether there are holes; See whether the heel seam is smooth, whether there is a concave belt, and whether the toe is round; Look at whether the shape of the cuff is round and good-looking, and whether the three points of the toe, the midpoint of the cuff and the heel seam are on the same line; High heels can be compared to the length of the shoe by aligning with the heel, and then cocking it to compare whether the toe is flush; Whether the perimeter of the outsole is the same width, whether there are some places that come out more or less, this is to see whether the outsole is crooked; After reading the pants, I will look at the inside, and it is easy to see whether the inner waist is bulging, whether there is wrinkles, whether the feet are crooked, whether they are tightly pasted, and whether there are places that do not fit; Finally, look at the cleanliness, whether there is glue on the surface, inside and heel.

Identification of shoes. 1. Check the box. Most fake shoes come in a box that is not genuine.

These fake shoes are either directly wrapped in shrink-clear plastic film or don't even have a shoe box. The bonding process of most fake shoe boxes is very sloppy and not as strong as ** shoe boxes. 2. Check the condition of your shoes.

If the shoes you just bought are similar in appearance to the pair you bought a long time ago, you can compare them. If the difference in quality between the two pairs of shoes is very significant, then the new shoes are likely to be fake and will break down after a few days of wear. Shoes always feel softer to the touch than fakes, and this is because they are made of genuine leather, while fake shoes use artificial leather.

The interlayer of the sole of the fake shoe is clearly distributed with spots left by the production process, but ** shoes do not have such a problem. Check your shoelaces. The laces of the shoes usually go through all the small holes, while the laces of fake shoes are threaded every other hole.

3Check the SKU code on the shoe box and the label on the inside of the shoe. The SKU size on each pair of ** shoe boxes should be the same as the SKU code on the back of the tongue. [8] If the SKU code of a shoe is missing or does not match, the shoe should be a fake.

Check the label on the tongue. Often, fake shoe manufacturers will sew outdated size tags onto the tongue. For example, the label of the fake shoe will show that the shoe was designed in 2008, when in fact the shoe was designed and manufactured in 2010.

4. Try it on. The insole of most fake shoes feels like plastic and lacks strong gravitational pull on the foot, while the insole of ** is made of carbon fiber rubber (BRS1000). Most fake shoes are not the right size.

Basically, the size on the label of the fake shoes is half a size smaller than the actual size, and the width of the shoes is much narrower than **. You can go to a trusted specialty store, try on shoes of the same style and size, and experience what it feels like to wear **shoes.

Identification of shoes. Dear, for you to find out: the method of identifying shoes:

1. The smell of new shoes will have a smell as soon as they arrive, but the smell of high-imitation shoes is much greater than that of real shoes, because it is rarely stocked for a long time. Generally, a few days to a month or two after the production is sold to the customer, such a short time, and it is completely enclosed in the shoebox, so the taste is very strong, and the first production to sales, there will generally be a cycle of about half a year. So the taste will be much lighter than fake shoes.

Another reason is that the glue used in high-imitation shoes is worse than that of **, and the taste is heavier. Peculiar smell is a common problem of high-imitation shoes, and there is almost no cure. So to judge whether a shoe is a fake shoe, start with the taste.

2. The biggest difference between insole high imitation shoes and ** is the insoles. No matter how realistic a pair of shoes is, even if it looks 99%. However, their insoles are still very different, the insoles of high imitation shoes are soft, the printing is rough, and the support and strength are not enough, which is mainly limited by the material.

Most of the ** insoles have their own antiseptics, while imitation shoes do not. Many people say that this is the reason for the smell of high imitation shoes, and the insole material used in high imitation shoes is composite material sponge or low-density silicone, which is characterized by softness, and the feeling of holding it in the hand is relatively firm. In addition, the insole of high-imitation shoes is also relatively watery in terms of printing and cutting, and the clarity of the teeth of the insole, raw edges, and logos are the problems that high-imitation shoes have not been able to change for a long time.

A shoe does not need to look at his upper, just look at the insole can see that seven or eight become 3, the number of yards above the two points are the detection method of the shoes in hand, now talk about how to distinguish the real and fake shoes before buying. Adidas: The size on the label of a high-imitation shoe is 46, and **usually has three more sizes.

If a person says that he sells **, but tells you that these three yards are out of stock every time, then he is very suspicious.

Dear We are happy to answer for you, and the following are the results for your query; Shoe identification authenticity<> hello, 1Check the appearance of the shoes: whether the appearance of the shoes is consistent with the shoes, such as the color of the shoes, details, lines, etc.; 2.

Check the material of the shoes: **The material of the shoes is generally more delicate, while the material of fake shoes is generally rougher; 3.Check out the workmanship of the shoes:

**The workmanship of shoes is generally more delicate, while the workmanship of fake shoes is generally rougher; 4.Check the logo of the shoes: Shoes generally have specific signs, while fake shoes generally do not; 5.

Check the price of the shoes**:** shoes are generally more expensive, while the ** fake shoes are generally cheaper. <>

How to distinguish the real from the fake with branded shoes? Just look at these 3 places, and you are no longer afraid of buying fakes, and you are afraid of encountering fakes when shopping for brand shoes online? Learn these 3 tricks, fakes have nothing to hide, and you have to learn them as soon as you read them.

1. Look at the label:

**The item number on ANTA's tag is printed together, not later. At the same time, the inspector on the OEM NoThere must be a transparent number attached to it.

2. Look at the style of shoes:

The Anta series of shoes is not produced without restrictions, the simple meaning is that you can have as many as you want, so the inventory of Anta shoes sold on the ** is generally more than a few hundred pairs to more than a thousand, which is unreliable. So friends who bought it saw this article and wanted to have a snack.

3. Look at 400 anti-counterfeiting and laser code anti-counterfeiting technology:

Anta adopts 400 anti-counterfeiting and laser code anti-counterfeiting technology, and since 08 years, Anta's shoes are anti-counterfeiting, and there will be a coating on the tag of the shoes, and there will be a set of numbers on the coating. Enter this set of numbers into ANTA's official website to check the authenticity.

Specialty stores generally can't be fake, if it's fake, call 12315 to expose it.

Look at the soles and uppers Of course, if the estimate of the specialty store can't be fake.

Summary. First, the bar code on the shoes is generally those shoes with brands, there will be a bar code on the top of the shoe, which is generally hidden under the tongue of the shoe, and you can scan the code to know the authenticity of the shoes. Second, pay attention to check the words and icons of the brand This is a common problem of counterfeit brand-name shoes, and some changes will be made to the words or icons on the shoe brand, such as missing strokes, or adding a punctuation mark that we will almost ignore, so when buying shoes, you must pay attention to check this.

Third, pay attention to the workmanship of shoes, such as the needle and thread written, and the place where there is glue, really good shoes can not appear jumping needle thread, and the outside of the shoes are some glue, only fake and shoddy shoes, these situations will appear.

First, the bar code on the shoes is generally those shoes with brands, there will be a bar code on the top of the shoe, which is generally hidden under the tongue of the shoe, and you can scan the code to know the authenticity of the shoes. Second, pay attention to check the words and icons of the brand This is a common problem of counterfeit brand-name shoes, and the words or icons on the shoe brand will make some changes, such as missing strokes, or adding a punctuation mark that we will almost ignore, so when buying shoes, we must pay attention to check this dust. Third, pay attention to the workmanship of shoes, such as writing needles and threads, as well as where there is glue, really good shoes can not appear jumping needlework, and the outside of the shoes are some fighting brothers and glue, only fake and shoddy shoes, empty faction will appear these situations.

Can you add, I don't quite understand it.

To identify the authenticity of a pair of shoes, you can self-check from the following details. 1. Check whether the parameters of the packaging box are consistent with the actual product, including: color, style, fabric, manufacturer, etc.

2. Use the mobile phone to scan the *** or barcode of the shoes to check whether the physical object is consistent with the information provided by the manufacturer. 3. Check the fineness of the workmanship of the physical object, the materials used in the product and other conditions for the minimum identification. If the parameters are basically the same, it proves that the product is the best.

If the parameters are too far apart, it proves that it is a fake product or a high-imitation product.