Honor 30S fell into the water, and then turned on and kept automatically entering the lock screen pa

After the mobile phone is injected, there may be abnormal function, in order to reduce the loss, it is recommended to deal with it as follows:

1.Try to place your phone in a dry and ventilated place, and use a paper towel to blot the liquid on the surface of your phone.

2.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3.Remove the SIM card and memory card.

4.Take your phone to a nearby Huawei customer service center for maintenance as soon as possible to avoid unnecessary losses. If you don't have a backup of your data, there may be a risk of data loss when repairing.

Notes:1Do not move or shake your phone frequently after the liquid is ingested to avoid the spread of liquid inside the phone.

2.Do not blow with a hair dryer or bake at high temperature after liquid intake, so as to avoid the liquid being blown into the inside of the phone and the high temperature damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a hidden risk after liquid ingress, so it is recommended not to try to turn them on.

1. First of all, we can only try the shutdown button. Just press and hold the power button for about three seconds to come out of the reboot and shutdown page.

2. Then in the shutdown state, press the volume button and the power button at the same time, after five seconds, the phone will display, release the power button at speed, and the volume button will not be released.

3. Then the factory reset page will come out, and this interface should be operated carefully, if you have very important information in your phone, you must think about the operation.

4. Then the phone will prompt you to enter yes, click to restore factory settings, then all the data on your phone will disappear, so you should deal with it carefully. If you don't have anything on your phone, you can access it. If you have important information, you can store the password in the computer, memo, or notebook.

Because when setting the password, the system has already reminded everyone that if they forget it, it will not be able to recover it automatically.

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after the liquid is ingested to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures (including microwave heating) after liquid infusion, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after liquid ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

In this case, the computer should be shut down immediately. This must be water that has entered the inside of the phone. It's this input. Lock screen password for this place. This happened. In the case of electric shock.

After the phone falls into the water, it can't be turned on. Dispose of the water inside.

It's just an abnormal operation of the system after the phone is flooded. It is recommended to turn off the mobile phone and then have the mobile phone repaired.

After the mobile phone is automatically turned off when it falls into water, it cannot be turned on immediately, so there will be problems, and it is recommended to go to a professional repair shop for repair and treatment.

If your phone has been in this situation, you need to dry it, if this does not solve the problem, then you need to dry it, and restore it to factory settings once.

Water ingress of the mobile phone will cause short circuit and damage to the internal electronic components, it is recommended to contact the official after-sales service center and the engineer will help check and deal with it.

If you use your fingerprint to unlock or reset your phone, you will be prompted to enter a lock screen password when the phone screen turns on. In order to avoid forgetting the lock screen password due to not using the lock screen password for a long time, resulting in device unavailability or data loss, a lock screen password memory enhancement scheme is designed, which is as follows:1

If your phone is unlocked for the first time after restarting, and you are required to enter a password to unlock it, please remember the lock screen password. 2.If your phone has not been restarted and has been unlocked with your fingerprint only, and when you unlock it again after a period of time (currently 72 hours), you must enter the lock screen password to unlock it once, and you can continue to use your fingerprint after the unlock is successful.

3 Situations in which the Phone Falls in Water:

1. Drop into clean water when the power is on;

2. In the case of power failure, it falls into non-corrosive liquid;

3. Fall into non-clean water when energized, or corrosive liquid or viscous liquid or other unclean liquid regardless of whether it is energized or not.

What do we do when we drop our phone in the water?

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1.Turn off the power as soon as possible.

2.Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Put it under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not rush to use strong heat sources such as hair dryers. Blow it and it's over.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure.

1.Shake it dry, but don't shake it off.

2.If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

3.If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

If you have poor hands-on ability, you should still repair it for a professional).

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

1.Turn off the power as soon as possible.

2.If you fall into a corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3.Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4.Rinse with alcohol or professional washing water.

5.Assembling. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.

It may be that the screen of the mobile phone is flooded, so there is a problem of accidental touch. Contact to send it to the official outlet for repair as soon as possible, otherwise the problem of water seeping into the inside of the mobile phone will be more serious after a long time, causing a short circuit.