My Apple 6splus charging port is a little off paint, okay?

1. It's okay, it's normal.

2. Apple 6S series paint loss is a bit serious, which is normal.

How to remove dust from iPhone charging port?

1. Find a piece of double-sided tape (transparent glue is also available, but you have to find a particularly sticky one) and tear it into a ribbon.

2. Stick the double-sided tape on the microphone or speaker and smooth it carefully.

3. Tear off the double-sided tape and you can see a lot of dust stuck out that you haven't noticed before.

4. Finish work.

5. Pay attention to clean up the dust, and do not use sharp objects to poke the dust on the microphone or speaker, otherwise the more you poke in, the more you will have to disassemble the machine.

Basically, it will not affect the use, if you really care about this matter, you can go to Apple's special repair shop and ask them to remedy it.

iPhone 6S oxidation door.

Many ** have reported that the iPhone 6S 6S Plus metal back cover has similar paint peeling corrosion due to coating oxidation. This incident has been further fermented, and many netizens have posted their oxidized iPhone 6S mobile phones on relevant forums and social networks.

It is reported that after the iPhone 6 series was launched in 2013, some users reported that the metal body of this mobile phone was easy to bend or even break. It is also commonly known as the "curved door".

Therefore, Apple launched the iPhone 6S series in 2014 and used a new 7000 aluminum alloy material, which is more tough and bending, but the corrosion resistance is worse than 6000 aluminum, so Apple has added a thick layer of antioxidant layer to the 6S in the production process, so as to avoid the iPhone from being eroded by oxidizing liquids such as sweat. But judging from the oxidation door that has exploded so far, Apple's treatment of the antioxidant coating is not particularly good.

Hello, mobile phones will lose paint, and it has nothing to do with authenticity.

No, my parents are, unless they fall and scratch, they won't be rubbed off by their hands.

1. Apple's 6S mobile phone has the problem of paint peeling.

2. Once the paint of the mobile phone is off, it cannot be repaired by touching up the paint.

3. Users can only try to replace the back cover to fix the problem of paint loss, and the brand customer service is still very expensive to replace the back cover.

4. It is recommended that users try their best; Buy a mobile phone case and use it on the mobile phone, which can effectively protect the appearance of the mobile phone and avoid the paint of the mobile phone due to bumps and wear.

Is it a parallel import?**I haven't heard that the paint will fall off.

The Apple 6splus charger head always burns out and the solution is as follows:

1. The lithium battery used in the Apple iPhone mobile phone is particularly sensitive to the ambient temperature due to the characteristics of the battery principle, and the normal working temperature is between 0° and 35° C.

2. If the iPhone is below zero, when charging it, there may be a problem that it cannot be charged or cannot be charged.

3. Although the temperature is low, it will not be able to charge the iPhone, but at least it will not affect the life of the battery.

4. If the temperature exceeds 35°C when charging the iPhone, it will cause permanent irreparable damage to the battery. That's why everyone usually uses it.

When your iPhone is charging, remember not to let it sit in a high temperature state for a long time.

Bring me with me to complain, this is clearly a problem with the product process, not our man-made problem.

Thickened antioxidant layer.

Content Expansion: Why the Back Is Prone to Oxidation:

1. It is understood that 7000 aluminum can be called the highest strength in industrial aluminum alloy, and its strength has even reached about 2 3 of the steel bar we call (called A3 steel in industry), and the wear resistance is also very strong.

Second, but there is a disadvantage, that is, due to the addition of more zinc, resulting in poor corrosion resistance, easy oxidation, surface adhesion is worse than 6000 aluminum, but it is said that Apple has solved this problem by thickening the anti-oxidation layer, but from the facts, it may be a problem of quality control or other aspects, or some iPhone6S will suffer from oxidation after a long time.

Of course, the appearance problem is not covered by the warranty, and it will definitely not be dealt with for you, either spend money to replace the entire shell, or buy a shell to bring with you.