-
Anonymous users2024-02-07Hello, the material of the brake disc is gray cast iron, special synthetic metal, which cannot be made by yourself, for safety reasons, it is best to buy original accessories for replacement!
-
Anonymous users2024-02-06Generally, the material of the more common brake disc is made of China's gray cast iron 250 standard, referred to as HT250, which is equivalent to the American G3000 standard;
2. The requirements of the three main elements of chemical composition are: C: Si: Mn:;
3. Mechanical property requirements: tensile strength: 21on mm2, hardness requirements: between 187 241, and some special or high-end models are also selected ceramic, high-carbon double aluminum alloy, etc.
-
Anonymous users2024-02-05Hello, for the brake disc of the car, this can not be made by yourself, it is generally formed at one time, if you make it yourself, you can choose high-carbon steel, it is still difficult to make.
-
Anonymous users2024-02-04You don't have to make this suggestion yourself, can it match the brake disc of the model of the car you are using, or is it an unknown? Normally, his material should be steel.
-
Anonymous users2024-02-03Hello, the brake discs of the car can't be made by yourself, they are all cast iron, and you can go directly to the pit to replace them.
-
Anonymous users2024-02-02Hello, the brake disc basically can't be done by itself, this is made of professional materials, and large equipment such as lathes is required.
-
Anonymous users2024-02-01This brake disc is made of a relatively special material. You can't make it yourself, and this requirement is stricter, so it's better to buy it.
-
Anonymous users2024-01-31The brake disc cannot be made by yourself, so it is recommended to buy the finished product directly and install the tuning. After all, driving safety is involved.
-
Anonymous users2024-01-30Isn't this a joke, brake pads, vehicle brake system, involving personal safety, it is best to replace the Bosch brand directly in the store, the brake disc is seriously worn, and the brake pads are not replaced in time.
-
Anonymous users2024-01-29Hello, if you want to solve this problem, it's better to buy an original factory, and it's not so good to produce it yourself.
-
Anonymous users2024-01-28Hello, the brake disc of the car basically can't be made by itself, it is molded at one time, it is recommended that you buy one.
-
Anonymous users2024-01-27Hello, the brake disc cannot be made by yourself, this is professionally produced, specifically it is better to buy a special car.
-
Anonymous users2024-01-26Ceramic brake pads are better than metal brake pads.
Ceramic brake pads are superior to metal brake pads in every way. The ceramic brake pads themselves do not contain metal components, so when braking, the noise is definitely much smaller than that of metal brake pads because the brake disc does not rub against the metal. And compared with metal, the friction coefficient of ceramic material is more stable, so in the case of high braking temperature, ceramic brake pads can maintain a good braking effect and will not drop like metal brake pads, which also improves braking performance to a certain extent.
Brake pad composition
Brake pads are generally composed of steel plates, bonded insulation layers and friction blocks, and brake pads are generally composed of steel plates, bonded insulation layers and friction blocks.
Traditionally, the friction material used on brake pads is a mixture of adhesives or additives that are reinforced by adding fibers to increase their strength.
Brake pad manufacturers are often tight-lipped about the announcement of the materials used, especially the new formula, of course, some ingredients such as: mica, silica, rubber fragments, etc. are public. The final effect of brake pad braking, wear resistance, temperature resistance and other properties will depend on the relative ratio of different components.
Brake pad refers to the friction material fixed on the brake drum or brake disc that rotates with the wheel, and the friction lining and friction lining bear external pressure to produce friction to achieve the purpose of vehicle deceleration.
Brake pads are also called brake pads. In the braking system of the car, the brake pad is the most critical safety part, and the brake pad plays a decisive role in the quality of all brake effects, so a good brake pad is the protector of people and cars.
It's made of plastic.
The fuel tank is made of plastic. >>>More
Nanhong is oneSilicaminerals, of different originsSouthern red agateAvailable in different textures and colors. >>>More
First of all, my personal opinion is that the disc brake is better than the V brake, and it seems that most of the novices who are unfamiliar with sports bikes often think that the disc brake must be better than the V brake, We have heard such words: "There are more than 2000 cars, and there is no disc brake" Such words really make people laugh and cry, look at whether it is a foreign game or a domestic professional competition, if it is a sunny day game, V brake still accounts for the majority, of course, there is a trend of increasing disc brakes, But for most of the casual riding and do not participate in amateur level competitions of the riders, the V brake, especially the better V brake is still enough, of course, for the downhill, like vigorous riding, like cool riders disc brake is still a suitable choice, but a penny for the price, disc brake or V brake itself We still recommend that customers choose from the perspective of use from their own budget to choose more reasonable. >>>More
1.Abrasion resistance.
When choosing, you should use a pencil to scratch on the selected wallpaper, and then use an eraser, and those that do not leave traces after erasing are of superior quality, and those that leave traces are defective. >>>More
Tools Required: Cone changer.
1. First on a mountain bike. >>>More