Can you wash your car just after pasting the car film, and can you wash the car just after applying

You can't wash the car just after applying the film. Do not raise or lower the windows or wash the car with water for three days to avoid falling off if the water does not dry.

Precautions for car washing:

1. Do not wash the car before the engine is completely cooled down, which will cause the engine to age prematurely. Car paint is still in a very hot situation to wash the car, will make the car paint shrink in the cold, the original smooth car paint will become dull and even cracked, from the perspective of car beauty, car wash should wait for the car to return to normal temperature in the process, especially after the long run, especially pay attention not to wash the car immediately.

2. Do not wash your car under the scorching sun. This will leave dry water beads on the body, which will seriously affect the effect of the car wash, whether the owner washes the car himself or goes to the car wash shop, be careful not to wash the car in the sun.

3. Do not use water other than soft water for cleaning, including hot water, alkaline water and water with high hardness. Because these substances can damage the paint. Washing with hard water, after drying, will leave marks and films on the surface of the body.

4. Do not use high-pressure water to wash the body. If the water pressure is too high, it will damage the paint surface of the body. If there is hard dust and sludge on the body, soak it with water first, and then rinse it with water. Apply a dispersed stream of water to spray.

5. Avoid adding detergent indiscriminately. Laundry detergents, detergents and low-quality soaps are not allowed when washing. Because these detergents contain alkali, it may wash away the grease in the paint surface and accelerate the aging of the paint finish. Generally, no detergent is added when washing the car.

6. Avoid rubbing. After rinsing with water, many people like to wipe it; There are two main problems with wiping: the cloth used is unqualified and the wiping method is wrong.

To wipe, use a soft cloth or a soft, clean sponge. When wiping, you should follow the direction of the water flow and gently wipe from top to bottom, and you should not draw circles or wipe horizontally.

7. Avoid indiscriminate use of detergents. There may be highly corrosive stains on the car body, such as asphalt, oil stains, birds, insect droppings, etc., these stains are difficult to clean, and must be used in the right way. Car washes cannot be washed with gasoline, stain removers, and thinners.

8. Do not use hard cleaning tools to remove dirt. Such as plastic brushes, razor blades to scrape stains, which can easily damage the paint surface.

9. Avoid oil stains. Do not touch the surface of the car with dirty hands stained with oil, or arrange oily tools or wipes containing organic solvents on the body, which is easy to cause the paint surface to fade prematurely.

The film does not affect the car wash, and the car can be washed immediately after the film, but the film surface is not (just pasted the film, the glue on the film has not fully functioned, and rubbing it hard may cause the film to move and affect the appearance), that is, the inside of the glass, do not lift the glass within three days, and the other links of the car wash can be normal.

Extension: car film is a kind of car insulation, anti-ultraviolet film products, there are many car film brands on the market, ** is also far away, many car owners often look left and right to make up their minds, in fact, a good car film is also a high-tech product, the choice of car film is quite a lot. Car film has high requirements for technology, soft and hard conditions, such as dust-free environment, special equipment, standardized operation procedures and skilled technology.

However, due to the extremely low threshold for joining the ranks, some illegal traders are mixed in, counterfeit and shoddy products are rampant, and consumers often suffer losses due to ignorance.

The first kind of automotive film is coated and composite process film, the main role is to block strong sunlight, this kind of automotive film is produced earlier, basically does not have the role of heat insulation, early called sun paper, also called tea paper. The second kind of car film is dyed film, and most of the dyed car films seen on the market are deep dyeing processes, in which endothermic agents are added to absorb the infrared rays in the sunlight to achieve the effect of heat insulation. Because it also absorbs visible light, the visible light transmittance is not enough, and the clarity is poor due to the limitation of its own process.

It is recommended that users try not to choose a film with too low light transmittance, and the window film, especially the film of the windows on both sides of the front row, should be more suitable for choosing a light transmittance of more than 35%. At this time, the side window film does not need to be drilled and does not affect the line of sight, and when driving at night, the strong glare reflection of the headlights shining on the rear mirror can be weakened, which makes the eyes very comfortable. In addition, it can also ensure good visibility when driving, reversing, and turning around on rainy nights.

Just after the film is applied, the professional will remind you not to raise or lower the windows or clean the car with water within three days, so as not to fall off due to the moisture not dryingI am not a professional Thank you to the landlord for giving me a chance to learn Thank you Finish, please judge the score.

It can't be washed, and the glass windows can't be opened, preferably after 3 days.

Can I wash my car just with the front windshield film?

The film does not affect the car wash, and the car can be washed immediately after the film, but the film surface is not (just pasted the film, the glue on the film has not fully functioned, and rubbing it hard may cause the film to move and affect the appearance), that is, the inside of the glass, do not lift the glass within three days, and the other links of the car wash can be normal.

Precautions after the film:

1. 5 days after the film, do not lift the door glass;

2. After one week of filming, do a quality inspection;

3. Do not start the demisting electric hot water within 15 days of the film;

4. If the edge of the membrane is blistered, it should be repaired at the 4S store within 24 hours;

5. After 15 days of filming, do not adsorb items with suction cups on the film;

6. After the film, if there is mist water vapor between the film and the glass, it will dry naturally and disappear within 4-10 weeks;

7. In order to ensure the adhesion between the film and the glass, please do not clean the heat insulation film and windows within a week.

Hazards of inferior car film:

1. Affect driving safety.

The inferior film is easy to deteriorate, the use time is short, and it is easy to produce light distortion and water ripples, which will make the driver feel dizzy. In summer, after high temperature exposure, the glue in the car film may melt, causing blurred vision of the front windshield and causing safety hazards.

2. Endangering the health of passengers.

The car film contains formaldehyde, benzene and other harmful substances, when the inferior film is exposed to the sun, these harmful substances in the glue will be released, endangering human health.

3. Affect the beauty of the car body.

After attaching the inferior car film, it will appear to fade and blister in about a year. Moreover, the glue on the inferior film is difficult to tear off on the glass, which damages the beauty of the car body.

4. The heat insulation function is weakened.

Inferior car film does not have the function of heat insulation film. The thermal insulation and ultraviolet protection of inferior car film cannot meet the standard, and if it is used for a long time, it will cause serious injury to the people in the car.

The outside of the car cannot be washed after the car is wrapped. Generally, after the car window glass is filmed, you need to wait at least 3-5 days before you can wash the car, and at the same time, it must be determined according to the weather conditions at that time; If it is winter, it will take about 7 days to dry, and about 3 days in summer, and in spring and autumn according to the temperature and humidity are similar to summer, it generally takes about 3-5 days to dry.

Notes:If the car is not washed after drying, it will cause air bubbles and water mist on the film, and once the air bubbles and water mist have exceeded 24 hours, it will be difficult to deal with the car film that has been applied to it.

At the same time, before the film is dry, avoid lifting the window, especially in the first two days, once the misoperation may cause the film to detach or even damage; Avoid using windshield electric heating, which is easy to cause deformation and damage to the car film; After the film is applied in summer, try to minimize the cold wind blowing directly on the film position, which is easy to cause the film position to pry and deform.

The car washes the car film on the car just after the film is completed.

It is influential, try to avoid washing the car within three days after the film is applied, so as not to cause the film to fall off due to the moisture not drying.

Rear window. Try not to open the defogging line within a week, and it is easy to have a negative impact on the defogging line before the moisture dries. After attaching, you can wipe the film surface with a damp towel, sponge or soft cloth. In addition, some time after applying the film, you will notice that there is a foggy water vapor inside.

This is the solar film.

What is normal during the drying process will slowly disappear after a while.

Car washing after the film is just completed has an impact on the car film, try to avoid washing the car within three days after the film, so as not to cause the car film to fall off due to the moisture not drying.

Try not to open the rear window defogging line within a week, and it is easy to have a negative impact on the defogging line if the moisture is not dry. After attaching, you can wipe the film surface with a damp towel, sponge or soft cloth. In addition, some time after applying the film, you will notice that there is a foggy water vapor inside.

This is a normal phenomenon in the process of drying the solar film, and it will slowly disappear after a while.

We recommend that customers do not wash their cars and do not drop the windows for 7 days. The car will be washed before the film, so you definitely don't need to wash the car soon after the film. Another reason is that the film and glass surface will be baked during the construction process, so the heat of the glass and the film is higher after construction, and if the car is washed directly after the paste, the film and glass will shrink when cold, which may lead to the phenomenon of glass bursting.

Generally, the car is washed before the film, and of course, if you want to wash the car after the film, of course, you can. However, it should be noted that the windows cannot be raised or lowered, and the front and rear windshields cannot be wiped. Generally, it is about 3 days in the sun, except in summer.

After the film, put the car in the natural environment for an hour or two before washing, it will not have an effect, and you should pay attention when it is very cold in winter, because the temperature difference is too large and the glass will burst.

It is best not to wash the car for five days after applying the film. Generally, the filmmaker will tell you not to wash the car for a few days.

If you mean long-term, then you don't have to worry because the membrane is all attached to it.

Yuma reminds you.

It is best not to wash the car for 7 days after the new film.

Also be careful not to wash your car with corrosive liquids.

It is best not to wash it for less than 3 days.

1. After the car film, avoid lifting the windows within three days, so as to avoid the displacement of the car film that has not been fully bonded.

2. After the car film is applied in winter, it is recommended that you do not raise or lower the windows or wash the car within a week. It takes about a month for the front and rear gears to dry. During the day, the front windshield should be exposed to the sun.

The most noteworthy thing is that the backgauge plus ** can not be opened within a month, because if the film is opened after the winter film, it will produce bubbles near the plus**, which cannot be repaired, and will cause unnecessary losses and troubles.

3. When cleaning car glass, the film window should not be cleaned with chemical solvents, so as not to corrode and damage the surface of the car film.

However, it is recommended not to send the car film from the 4S store, the quality is not very good, it is easy to bubble after a long time, and there is an unpleasant smell.

It is possible to wash the car, but you need to pay attention to the following clusters of dots:

1.Do not wash the vehicle for the first 48 hours after the film is applied to allow the film to be fully secured.

2.Use a soft sponge or towel and avoid using brushes and high-pressure water guns.

3.Do not use car washes that contain bactericides, acidic or alkaline ingredients.

4.Do not wash your car in hot sunlight.

5.Wipe the moisture dry with a soft cloth or water absorber to avoid water droplets leaving on the film and causing watermarks.