How can I clean up the unwanted things in the C drive?

Open the computer, right-click on the system drive letter, and select Clean in Properties.

The specific steps are as follows: 1. In the general tab of the Properties page, click Disk Cleanup. 2. Wait for the Disk Cleanup tool to search for files on the disk that can be cleaned. 3. On the disk cleanup interface, check the items that need to be cleaned up, and click Clean System Files.

4. Then click OK, and click Delete File in the pop-up Disk Cleanup.

Brain C disk is a system disk, and the remaining space of the system disk affects the running speed of the computer.

Open the computer, select the C drive, and right-clickClick Properties, click Disk Cleanup, tick the files you want to delete, click Clean System Files, click OK in the new window, click OK to permanently delete files. After the cleanup is complete, go back to the property settings and click OK, detailed steps:

1. Open the computer, select the C drive, right-click the mouse, and click Properties.

2. After entering the property setting interface, click Disk Cleanup.

3. In the pop-up new window, check the files you want to delete and click Clean System Files.

4. A new window pops up, click OK to delete the file permanently.

5. After the cleanup is completed, go back to the attribute settings and click OK.

1. Open the desktop of the computer and find the computer.

2. Click on the C drive, right-click - Properties.

3. In Properties, click Disk Cleanup.

4. Finally, the content of disk cleanup is prompted, tick it, and confirm.

5. Or empty the **station** station and save the large files on the desktop to other locations as much as possible, which will also occupy the space of the C drive.

6. There is also the cleaning of history in the browser, tool-internet option.

1. Right-click on the C drive of the computer and select "Properties".

2. In the pop-up property menu, select "General" and click "Disk Cleanup".

3. Wait for the disk to clean up the computing garbage.

4. Select the garbage that needs to be cleaned up and click OK.

The above is to use the win10 system to clean up the C disk garbage, and the win7 operation is not much different. If your computer is also stuck, you may wish to try to clean the system C drive.

1. Open this computer, select the disk you want to clean - right-click - select "Properties".

2. In the "General" tab of the properties interface, click "Disk Cleanup".

5. Then click OK, and click "Delete Files" in the pop-up "Disk Cleanup".

Use disk cleanup, C drive moving.

On the administrator command page, enter "powercfg -h off" and press enter to run the command, the command will start to run automatically, and after the run is completed, you can restart the computer.

Desktop PC: Hongji Windows 7 Ultimate.

1. First of all, we find the "computer" icon on the computer desktop (some may be my computer) and double-click the left button to open it.

2. We find "Local Disk C" in the page that opens, and then right-click.

3. After right-clicking, a menu will appear, we will click on the "Properties" option at the very bottom of the menu and click it.

4. Find the general option in the open local disk C property and click "Disk Cleanup".

5. Then a small dialog box will pop up, which is scanning the disk and we just need to wait.

6. After the scan is completed, a new dialog box will appear, we find the "OK" button and click it.

7. Finally, a small dialog box will pop up asking whether to permanently delete these files, and we click "Delete Files" to complete the cleanup.

How to clean up the C drive when it is full? 1 minute to teach you how to clean C drive files, suitable for all systems Ultra Clear.

If I have a thorough cleanup, only the reinstallation system is the cleanest. Or use some antivirus software for disk **.

The C drive is generally cleaned with junk cleaning software. There is also manual cleaning. Manual cleanup is all about cleaning up those useless files. Move all the software that is not necessary to be installed on the C drive to other drive letters.

There's nothing cleanest about this thing, you just have to clean up some of your daily junk.

Here's how to solve this problem:

1. Right-click on the C drive and select "Properties".

2. Click "Disk Cleanup" in the properties window.

3. Click on the tomato and click "Clean up the system of Natong documents".

4. At this time, the system will scan the C drive, it will take a little time, please wait patiently.

5. After the scan is completed, check the items you want to clean up and click "OK". Tip: If you want to see what a certain item does, you can select the rubber item and you can see the detailed description of the item in the description below.

6. Finally, click "Delete Files" in the pop-up prompt box.

Summary. 1. Turn off System Restore.

2. Set the virtual memory to a partition other than C card.

3. Install the software to the D drive.

4. Transfer the temporary files of the system, the temporary files on the Internet, and my documents to the D drive.

5. Use 360 to delete junk files.

How to clean the C drive to the cleanest.

1. Turn off System Restore. 2. Set the virtual memory to the partition of the source other than the C card 3, install the software to the D disk 4, transfer the temporary files of the system and the temporary escort of the Internet to return the files, my documents, all transferred to the D disk 5, Lu Hunger with 360 to delete junk files.

How do I turn off System Restore?

1. First of all, right-click the computer icon on the desktop, and the right-click drop-down submenu will pop up, and "Properties" will be visible in the submenu. 2. Click "Properties" to pop up the computer system window, and "Advanced System Properties" can be seen in the menu on the left side of the page. 3. Click "Advanced System Properties" to pop up the system properties window, and you can see "System Protection" at the top of the page.

4. Click to enter the "System Protection" tab page, where you can configure the settings of System Restore. 5. Select the drive disk, and then click Configure to pop up the system protection settings page. 6. Check "Turn off System Protection", and then click Apply to confirm, that is, you can turn off System Restore.

Hope it helps.

If you are satisfied, give a thumbs up.

1. Method 1: Delete the dormant file.

The file is a hidden system file in the root directory of the C drive, the size of the hidden file is exactly the same as its own physical memory, when you put the computer into a sleep state, Windows7 writes all the memory content to the file before shutting down the system. Then, when you turn the computer back on, the operating system uses to put all the information back into memory, and the computer returns to the state it was in before it was shut down. But Windows7 will not delete this file, but has been placed on the hard disk, which will occupy a part of the disk space in vain, and your hard disk will not be able to bear it for a long time.

Windows 7 The following methods to safely delete dormant files: Run as an administrator to open a command line window, and then enter: powercfg -h off, press enter, and run.

2. Method 2: Clear the temporary files generated by the application.

These files are usually stored in the windowstemp folder and in the temp folder of the user folder. (My Computer-C-Drive-WindowsTemp folder).

Cleaning method: Delete all the files in the appdatalocaltemp folder of your username in c:windowstemp and c:users.

3. Method 3: Clear the temporary files generated by IE and other browsers.

Cleaning method: Open the browser, Tools - Internet Options - Browsing History click Delete below, delete cookies and IE temporary files, especially before backing up the system, it is best to delete it cleanly.

4. Method 4: Clear the System Restore and System Volume Information folders.

systemvolume information folder, the Chinese name can be translated as "system volume label information". This folder stores the backup information of the system restore. "System Restore" is one of the most useful features of the Windows operating system, which uses a "snapshot" to record the state information of the system at a specific time, which is called a "restore point", and then restores it according to this information when needed.

There are two types of restore points: one is automatically created by the system, including system checkpoints and installation and restore points; The other is created by the user according to his needs, also known as manual restore points. As users spend more time using the system, more and more restore points will increase, resulting in less and less hard disk space, and finally a warning of "insufficient disk space".

It is also the easiest file to occupy space in the system disk, and the size of this file can reach 4G, or even larger.

Removal method: Turn off System Restore directly! Right-click "Computer" - Properties - Advanced System Settings - System Protection - Click on C Drive - Configuration - Reset Settings Among the three options below, directly select the last "Turn off System Protection" - Delete - Continue - OK.