Is there anything to pay attention to when decorating the house and choosing the location of the soc

1. Installation and placement of various electrical equipment.

According to different functional areas, determine the installation position of various electrical equipment, and then arrange the position of the socket in combination with its installation position for consideration.

2. Consider the placement of various furniture and other items.

First, determine the location of various furniture and other items in advance, and set the socket in a position that is convenient for subsequent use and is not blocked by furniture and other items. For example, the socket next to the bedside table is generally recommended to be arranged above the bedside table.

3. Other common sockets are generally set at about 30 cm above the ground.

Clause. 1. The height of the layout of the decoration switch and socket.

1.The height of the room socket switch arrangement is generally between 120 cm and 135 cm;

2.The wall sockets for audio-visual equipment, desk lamps, and power strips at home are generally about 30 meters from the ground

Centimeter; 3.The height of the socket of the washing machine from the ground is about 120

cm to 150

Centimeter; 4.The socket for the refrigerator is about 150

cm to 180 cm;

5.The height of the sockets for air conditioners and exhaust fans is about 190 meters from the ground

cm to 200 cm. Clause.

2. The location of the layout of the decoration switch and socket.

The general room socket switch layout is to use the opposite hand to open and close the action, and there are more people with the right hand, so the switch at home is generally on the left side, which is in line with the logic of behavior. However, when it comes to the placement, you need to pay attention to the following issues:

1. The opening direction of the adjacent entrance door arranged with the room socket switch is facing the right.

2. The height of the furniture before the door is opened.

3. The general door switch is recommended to use luminous, which provides us with convenience in the night switch, otherwise the wall will be dirty because of long-term groping.

Clause. 3. Details of the layout of the decoration switch and socket.

1. Some sockets with switches can be set up, so that we can cut off the power supply without pulling the plug, and it will not affect the beauty of the entire power supply.

2. When decorating the switch socket layout in the kitchen, do not install the socket above the stove, this is to prevent overheating.

3. For the bath bomb switch installed in the bathroom, we must remember to leave a few more centimeters, because this switch will be larger than the switch of ordinary lights, and it will be troublesome if it is almost impossible to install it.

4. It is best not to install the switch too close to the water, if it is an open balcony, don't forget to choose a special splash-proof cover when designing the switch socket.

5. In order to consider the socket of the lights in the bookcase and cabinet, as well as the corresponding control switch, it is necessary to grasp the control of the details.

6. In order to consider the sockets of burglar alarms, gas alarms, wall-mounted LCDs, entrance lights, etc., remember to design the control switches accordingly.

7. In order to consider the use of vacuum cleaners in each room, it is necessary to leave a few more sockets, which can provide convenience for future use.

The interior decoration must be stable during the installation of the socket. However, when installing the socket, do not place the socket in a place that is too high, nor can you place the socket in a place that is too low, especially in a place close to the water source, and do not install a socket, otherwise it is easy to leak the power supply. A number of unnecessary safety hazards have emerged.

Of course, it should also be noted that the indoor decorative socket must be designed, after all, once the design is completed, it may be more difficult to modify it later, so the installation socket must be installed in place.

1. Don't be too high.

The socket can not be installed too high, this is inevitable, because we usually use mobile phones, computers or TVs more, the socket line of these electronic devices is not so long, if the installation is too high, then the socket line can not be stretched so long, so it is better to put the socket in the middle of the lower position, so that it is good to avoid the high and low placement of the socket and also has a very great effect on the installation of the whole family operation. <>

Second, it can't be too low.

Of course, try not to put the socket in a too low position, especially not in the same position as the shoes, otherwise it is easy to hit the socket over and down, and even if you accidentally spill water into the socket, it is easy to leak, so it is not good to put it in a too low position, many families do not take this into account when decorating and installing the socket, only considering that the socket can not be placed too high, but it is not considered that the socket can not be placed too low, and it must be used. <>

3. The interface should be far away from the water source.

Of course, we should also pay attention to the interface away from the water source, especially the interface of some sockets, if it is close to the water source, it is easy to have some water leakage problems, this is to pay attention to, if you want to install a socket in the bathroom, you can be sure to install a waterproof cover, which is more reasonable to install a waterproof cover installed on the socket shell, and the installation of a waterproof cover is not very expensive, can play a protective role, I think it is very good. <>

To install in a convenient place, safety is also a concern. Convenience is the core of socket installation, and it is necessary to consider the convenience of users, otherwise it will not be able to be used; Consideration of safety is not to install near water sources and fire sources to avoid danger.

The living room is generally installed near the TV cabinet, the dining room needs more sockets, a large number of sockets need to be installed near the console, at least 4 sockets need to be installed in the bedroom, and the head of the bed needs to be installed.

The location should be reasonable, in line with the needs of humanized use, do not do the ground plug, do not make it too high, and do not make it too low, so that it is convenient to use.

When decorating, especially in the circuit transformation, it is necessary to determine the location of sockets and switches. The number of switches and outlets required for each room should also be confirmed. This is the layout of the switches and sockets in the room.

Depending on the location of our press and the location of the wardrobe, we should set up an outlet, and some wardrobes should have an outlet.

It's the age of the smart home. Some homes will consider installing motorized curtains in the future. If they don't install it for the time being, they will keep an outlet.

Leave an outlet near the curtain rod for backup. So we need to consider the layout of the switches and sockets in the bedroom. Just like a socket in a bedroom, one should be reserved on both sides of the bed.

Two sockets are reserved for the TV position, and a three-prong socket with a switch is reserved for the air conditioning position. If you have a computer, reserve a three-prong socket with a switch, and also reserve one or two sockets in the bedroom.

The switch is recommended to use a dome light switch with dual control or dual loop control. If there is an electric water heater in the bathroom, a three-pin socket with a switch should be reserved. If you have a washing machine, keep a three-prong socket with a switch next to the washing machine.

Keep a hair dryer socket next to the washbasin mirror. There is a socket next to the toilet. Then reserve 1 or 2 sockets in the corresponding place of the toilet, and there should be a switch for the lighting in the bathroom.

Don't forget the mirror lights and book a switch. Sockets on both sides of the bed in the bedroom are essential. At least two sockets should be installed.

You can use a desk lamp, a mobile phone and an iPad. Remember to install dual controls. If you turn off the lights at night, you don't have to get up and run to the door.

The position of the socket should not be blocked by the size of the furniture and the water and electricity unit, otherwise it will be wasted if it cannot be used. There are many appliances in the kitchen. At least 2-3 sets of sockets should be installed on the countertop.

It is better to bring a switch, otherwise it is dangerous to pull out the socket with wet hands. The installation height of the socket should be kept to the left and right.

1. The air conditioning socket should be about 1.7 meters above the ground. 2. There should be sockets on both sides of the bed. 3. Reserve an outlet next to the toilet. Fourth, there should be a socket next to the dining table. Fifth, from top to bottom of the kitchen, the location should be calculated and the socket should be reserved.

The location of the socket installed indoors needs to consider in advance which electrical appliances are planned to be purchased, and reserve a certain margin on this basis, so as not to have no supporting sockets to use after moving in. In addition, some high-power electrical appliances need to plan a separate socket line, which should not be shared with other sockets, such as air conditioners, bath bombs and other electrical appliances. The refrigerator also needs to occupy a separate line so that the power switch can be turned off when going out, but the power supply of the refrigerator needs to be retained separately.

Finally, the panel position of the socket also needs to follow the construction standards, such as the horizontal distance between the two sets of sockets should not be too close, and the socket should not be less than 30 cm from the ground, etc.

In the process of interior decoration, the installation of sockets is also very particular, generally speaking, it should be set as close as possible to the owner's habits.

If it is installed in the living room and bedroom, then the façade wall can be installed with a spare socket within the range of meters, and the general socket should be meters away from the ground, next to the washing machine, next to the TV, next to the refrigerator, and next to the air conditioner, as well as range hoods, electric water heaters, kitchens, and bathrooms should be installed.

It should be installed in a more secluded place, and it should also be particularly convenient, so that it can be more beautiful.

It is necessary to determine the location of the socket according to their own design, and the quantity must be enough, rather more than less, to think about the specific use of each socket, the quality should also be good, and the installation should be very safe.

1. The TV wall needs to be installed with 2-3 five-hole sockets (300mm from the ground), if it is a wall-mounted LCD TV, you need to install one behind the TV, otherwise there will be wires hanging on the wall, and the effect is ugly.

2. A five-hole socket can be installed at the back of the refrigerator 300mm from the ground.

3. Next to the air conditioner, you need a 16A three-pin socket (1800nn from the ground).

4. 1-2 five-hole sockets (300mm from the ground) are needed under the computer desk to facilitate the wiring board in the future.

5. Microwave ovens, rice cookers, etc. need to be equipped with 2-3 five-hole sockets between hanging cabinets.

6. There is a five-hole socket next to the range hood.

7. There is a five-hole socket next to the water dispenser (300mm from the ground).

8. Install a five-hole socket (300mm from the ground) next to the 2nd side of the bed.

1. You can set up some sockets with switches, so that you don't need to pull out the plug and cut off the power supply, and the unplugged wires will not affect the appearance, such as the washing machine socket can be closed when not in use, and the air conditioning socket can be closed in the off-season without unplugging;

2. Do not install the kitchen socket on the stove to prevent overheating;

3. Install the bathroom bath bomb switch, remember to leave a few more centimeters, because this switch is generally larger than the switch of the lamp, if it is almost impossible to install it, it will be troublesome;

4. Do not install the switch too close to the water, if it is installed on the open balcony, remember to use the special splash-proof cover of the switch socket;

The planning and setting of the switch socket can be started from the following aspects:

1. Determine the electrical appliances to be selected one by one according to each functional area; For example, there are which appliances to use in the kitchen, which ones are used for a long time, and which ones are used occasionally, etc., make a list first.

2. Determine the position of each electrical appliance. It should be clear when doing decoration design.

3. Determine the location and number of sockets according to the position.

1. The bedside table socket in the bedroom is recommended to be installed above the bedside table, which is easy to plug and unplug in the future.

2. There are several more sockets in the living room next to the sofa;

3. The kitchen appliances should not be designed in the counter area, and it is best to design the area separately;

4. If you have the habit of squatting on the toilet to play with your mobile phone in the bathroom, you can design an outlet next to the toilet to facilitate the charging of your mobile phone;

5. The entrance door and the living room position can be designed with dual control switches such as the living room hall;

6. The bedroom can be designed with dual control switches, which can be reached at the door and at the head of the bed.

7. The wall of the restaurant should be left with a socket power supply, which is convenient for the electricity needs of hot pot appliances in the future, and it is not recommended to install a ground plug for home decoration.

To decorate the house, concealed projects should be done well, such as wiring, socket problems, and water and fire ruthless switch sockets should be bought. Let's take a look at it: 1. There are the most fake sockets, and ordinary people can't distinguish the real from the fake, so it is recommended that the socket switch these things be purchased in the building materials supermarket as much as possible, and the quality is only ***.

2. Classification of switches: single open, double open, three open, and multi-open. When designing the circuit, we must take energy saving into account, otherwise a spotlight will be 15W, which is too power-consuming. At this time, it is necessary to use multiple switches to group the lamps and lanterns, so that it is relatively energy-saving.

3. Select the socket:

Safety sockets – Families with small children should definitely consider choosing safety sockets, which have special protection.

Waterproof sockets - suitable for bathrooms and kitchens.

Air conditioner socket - for air conditioning, it cannot be mixed with other sockets.

Ordinary socket - it is best to choose more 5-phase sockets (that is, 5-eye, like air conditioning socket is 3-eye, five-eye is one is three-plug, one is two-plug), easy to use.

1. Kitchen: range hood socket, water dispenser socket, refrigerator socket; It is best to leave 2 sockets above the countertop to facilitate the use of some small household appliances, such as rice cookers, ovens, etc.

2. Bathroom: washing machine socket water heater socket (if you choose the home improvement network, the most professional home decoration portal ** is the electric water heater, you need to leave this socket) It is best to add a socket next to the mirror to facilitate men to charge the razor.

3. Bedroom: a power socket is set on both sides of the bed; One side is provided with a ** socket; If necessary, you can consider setting up a network cable; Air conditioning sockets, cable TV sockets.