What should I do if the drum washing machine rings when it is dried, and when the drum washing machi

The noise may be due to the unbalanced feet of the washing machine, too much clothing being put in, and unbalanced dehydration caused by entanglement of clothing.

It's like there's something hard in there... I think there are missing coins, keys, and other hard objects in the laundry. Before doing laundry, you should make sure that there are no items left in your pockets.

If there is a sound of hard objects every time you spin down, it should be that the hard objects that were missed before have fallen between the inner and outer barrels - your home is a drum washing machine, you can open the small baffle at the bottom of the front panel, and then unscrew the pump cover to take out the debris inside, and then tighten it and install it. I really don't know how to get it, so I call the after-sales service to take a look.

5,6 years ago products, that should have the following reasons:

1。The balance weight is broken.

2。The inner tube tripod is broken.

3。The shock absorber is scrapped.

4。The shock spring is scrapped.

The above 4 points are more likely. Mile2 is more likely.

If it is 2, hurry up the repair, or the outer cylinder will be scrapped.

The above 4 points can not be handled by non-professionals, if you are not in this circle, let's sell it.

Some thoughts on the front.

1。Tire slipper? Haven't heard of it.

2。Slip? There was no sound of slipping, it was a squeak, just like the sound of shoes rubbing against the floor tiles.

3。Coins? If it is a coin, then there should also be a sound when the bucket is empty.

There is a benevolent brother, by the way, it has been used for so long, it is time to change the belt, if the washing machine shakes badly. Because the belt is the power carrier of the motor and the cylinder is also the carrier of unbalanced transmission, in order to ensure that the washing machine does not jump in the future, replace it with a new one, pay attention to the belt must be changed to the same, not too loose and not too tight. There is a model number on the belt, take a look for yourself.

There are several possible causes:

1. The washing machine is not flattened, and the inner cylinder rotates at high speed when it is spinning dry, and collides with the outer cylinder.

2. Too much clothing causes the inner cylinder to rotate unevenly and collide with the outer cylinder.

3. The speed is too high, the washing machine has a maximum speed, but not all the clothes are suitable for washing the highest speed, and the relatively large and heavy clothes are not suitable for too high speed.

Automatic drum washing machine maintenance, spinning and abnormal noise, electrical appliance maintenance.

The drum washing machine is particularly loud when it is spinning off, which may be caused by the following reasons:

1.Unbalanced washing machine: When the washing machine is spinning dry, if the laundry is unevenly distributed or the washing machine is unbalanced, it will produce large vibrations and noise. In this case, you can stop the washing machine, readjust the distribution of the laundry, or adjust the level of the washing machine.

2.Worn drum bearings: After a long period of use, drum bearings may wear out, resulting in noise when spinning dry. In this case, it is necessary to contact professional maintenance personnel for repair and replacement.

3.Belt wear: If the belt of a drum washing machine is worn or slackened, it can also cause noise when spinning off the dough mill. In this case, it is necessary to contact professional maintenance personnel for repair and replacement.

4.Foreign objects inside the drum: If there are foreign objects inside the drum, such as coins, keys, etc., it will also cause noise when spinning. In this case, you need to stop the washing machine and remove the foreign object.

In short, if the drum washing machine is particularly noisy when it is dried, it is recommended to check whether the clothes are evenly distributed and whether the washing machine is balanced, and if the problem persists, you need to contact a professional maintenance personnel for overhaul and repair.

<> when the drum washing machine is dried, the chain sells loudly, and there are many specific reasons for the slag, and different solutions need to be found according to different reasons and problems. Details are as follows:

1. IfThe starting capacitor is damaged or reduced, the motor will not start and hum, when overhauling, check whether the starting capacitor capacity is invalid. If it is damaged, it should be replaced in time, and pay attention to its original withstand voltage value and capacity parameters when replacing it to ensure consistency.

2. IfThe motor coil is short-circuited between turns, which makes it difficult to start, will also make a humming sound, in which case the motor can only be replaced with a new one.

3. IfThe brake line is broken or the cover is not closed, you will find that the washing machine is difficult to start and hums, and during maintenance you will need to check the brake lines, reconnect the brake lines, and start operating after the lid is closed.

4. IfMotor bearings are damaged and jammed, the washing machine also makes a buzzing sound when it dries, in which case it is necessary to disassemble the washing machine motor and replace it with a new bearing.

5. This may be due to the installation processThe transport bolts were not removedor caused by packaging.

6. When dehydrating, check firstWhether there is metal on the clothingIf it is, it is advisable to take it out. If it is a pendant, it is recommended to remove it or clean it sequentially.

7. Please checkWhether the dehydrator is level or not, the washing machine may be placed in an uneven place. You can swap it out to a slightly flatter spot or adjust the balance knob under the washing machine.

8. Check whether the washing machine is glandedPress the garment smoothly

If the above issues are not resolved, there may be problems with the internal parts. It is recommended to contact after-sales maintenance personnel to visit.

If the drum washing machine is particularly loud when spinning, it may be caused by the following:

Unbalanced load: The laundry is unevenly distributed within the drum, resulting in unbalanced vibration and noise when the drum rotates at high speeds. The solution is to stop the washing machine and redistribute the laundry to make sure it is evenly placed.

Overload: If the washing machine exceeds its rated load capacity, the drum will be subjected to excessive weight when spinning, resulting in increased noise and vibration. Make sure to load your laundry according to the rated load capacity of the washing machine.

Foot Leveling: Check whether the four soles of the washing machine are stable, if the soles of the feet are unbalanced, the washing machine will be unstable and noisy when spinning dry. Adjust the soles of your feet to make sure the washing machine sits smoothly on the floor.

Check the shock-absorbing device: Front-loading washing machines are often equipped with shock-absorbing devices, such as shock-absorbing feet or shock-absorbing pads. Check that these anti-vibration devices are in good condition and make sure they are effective in reducing the vibration and noise of the washing machine when it is spin dry.

Check the drum parts: If none of the above methods work, it may be that the internal parts of the drum are faulty or worn, and professional maintenance personnel are needed to overhaul and repair.

If the problem persists or cannot be solved, it is recommended to contact the manufacturer of the washing machine or the after-sales service center for professional technical support and repair services.

Please check the following: 1. Whether the transport bolt is removed. Before using the washing machine, be sure to remove the transport bolts on the back, otherwise the washing machine will not only be very noisy but also the body will shake very badly.

2. Whether the washing machine is placed horizontally. Before installing the washing machine, the characteristics of the installation site must be hard, dry, and flat, and it should be protected from direct sunlight and away from heat sources such as gas. Do not place the washing machine on a carpeted base.

3. If it is not stable, please adjust the foot. After the washing machine is placed, check whether the washing machine shakes smoothly, if there is shaking, you can adjust the 4 feet until it is stable.

There may be the following reasons, which should be repaired.

1. The balance weight is broken.

2. The inner tube tripod is broken.

3. The mold vertical shock absorber is scrapped.

4. The shock absorbing spring is scrapped.

Generally speaking, there are two situations, the first case, that is, his vibrator is broken and unbalanced, so it will cause the sound to be particularly loud, and the second case, it is likely that you put too little clothes, or put it unevenly, this situation will also occur. If that's the case, you can turn on the washing machine and put the clothes back in the room, and maybe it'll be okay, and you can rent a bend to do it.

Summary. Hello dear. The washing machine makes a loud noise when it is dried, and the maintenance method is as follows:

1. Place the washing machine on a flat floor, or place a flat shelf under the washing machine. 2. When the clothes are placed in the washing machine, you can check whether there are any foreign objects, and clean up the clothes in the bucket in time 3. Make a "crackling" sound: Generally, this situation is due to the noise caused by the relaxation of the transmission belt, at this time, you can rotate the motor inside the washing machine to the direction away from the wave wheel shaft, so that the loose belt is tight, and then observe again.

4. You can change the clutch spring 5. Find a maintenance master for maintenance in time, and use the abnormal sound washing machine for a long time will cause the secondary damage of the washing machine to a greater extent.

Hello dear. The maintenance method is as follows: 1. Place the washing machine on flat ground, or place a flat storage board under the washing machine before it is too late.

2. When the clothes are placed in the washing machine, you can check whether there are any foreign objects, and clean up the clothes in the bucket in time 3. Make a "crackling" sound: Generally, this situation is caused by the noise caused by the relaxation of the transmission belt, at this time, you can rotate the motor inside the washing machine to the direction away from the wave wheel shaft, so that the loose belt is tight, and then observe again. 4. You can change the clutch spring 5. Find a maintenance master for maintenance in time, and the abnormal noise washing machine will cause secondary damage to the washing machine to a greater extent.

Washing machine is a cleaning appliance that uses electrical energy to produce mechanical action to wash clothes, and is divided into two categories according to its rated washing capacity: household and collective. China stipulates that the washing capacity of less than 6 kg belongs to the household washing machine: the household washing machine is mainly composed of a box, a washing and dehydration bucket (some washing pants are separated from the dehydration bucket), transmission and control of the filial piety cover combustion system, etc., and some are also equipped with heating devices.

Washing machines generally refer to the use of water as the main cleaning liquid, as opposed to the use of special cleaning solutions, and the dry cleaning that is usually carried out by a dedicated person.

This situation is mostly because of the clutch.

Damage. There are also some models of washing machines with dual return motors, which may be due to damage to the motor of the washing machine, but this is less likely, accounting for about the total failure rate.

of 5%-10%. It may also be because the washing machine's roller is stuck, the roller is loose or the connection is corroded, the V-belt is loose, the small pulley is loose or the buckle is live, the large pulley is loose or the connection is damaged, and the planetary wheel is damaged.

Damage, etc., will cause the washing machine to not be able to spin dry. The solution to the drum not working when the washing machine is spinning dry: 1. First of all, the capacitance of the washing machine is the most likely to have problems, and then check the motor.

Wisdom draft to find out whether the capacitor and motor are working normally. 2. Secondly, check whether the brakes of the dryer in the washing machine are correct, and whether the brake has a spring coming off. 3. Open the back cover of the washing machine and check whether the brake cable of the washing machine is broken and whether the brakes are locked.

4. The belt of the washing machine will not rotate if it is aging and loose and slippery, and the belt of the washing machine should be replaced. 5. Check whether the computer board is working properly. 6. Check if there are any foreign objects stuck and remove the clothes.

7. Check the wave wheel and replace or overhaul the wave wheel in time. 8. Tighten or replace the small pulley. 9. Check the clutch of the washing machine.

If there is a problem, change the clutch.