How to set up the access point of Xiaomi Mi 3 and how to set up the access point of Xiaomi mobile ph

Hello, Xiaomi mobile phone Internet and MMS parameters reset method: please enter the mobile phone menu, select "Settings" - Mobile Network "- Enabled Data Traffic (Switch is On)" - Access Point Name", click the menu key in the lower left corner of the mobile phone, select "Reset to default settings", after the default setting is successful, you can select "CMNET" or "CMWAP" access point in the generated access point list. Once you've reset your parameters in this way, you'll be able to use the Internet and MMS features.

Note: After you set up an access point, the dot after the name of the access point will be green. [The setting method is for your reference, the menu name may be slightly different depending on the model, please refer to the actual situation].

China Unicom card Internet settings:

Go to "Menu" - "Network Services" - "WAP Browser" - "Settings" - "Mode" - "OPPO Plaza" - "Mode" - "Account Information (Data Account)" - Select "GPRS", and then there are the following three settings:

1: If you select "China mobile cmwap", the connection type can be "wap" or "http". When "wap" is selected, the **server is:

Security: "Open" or "Close" are acceptable; When "http" is selected, the **server is: , port:

802: If you select "China mobile cmnet", the connection type can only be "http", **server is: , port: 8080

3: If you select "China mobile unicom gprs", the connection type can be "wap" or "http". When "wap" is selected, the **server is:

Security: "Open" or "Close" are acceptable; When "http" is selected, the **server is: , port:

80 Mobile SIM Internet Settings: (General Default).

Go to "Menu" - "Network Services" - "WAP Browser" - "Settings" - "Mode" - "OPPO Plaza" - "Mode" - "Account Information (Data Account)" - Select "GPRS", and then there are the following two settings:

1: If you select "China mobile cmwap", the connection type can be "wap" or "http". When "wap" is selected, the **server is:

Security: "Open" or "Close" are acceptable; When "http" is selected, the **server is: , port:

802: If you select "China mobile cmnet", the connection type can only be "http", **server is: , port: 8080

It has nothing to do with the previous Internet settings, but when logging in to QQ, "Select Data Connection" can select "China Mobile CMWAP", or "China Mobile CMNET", or "China Mobile U".

How to set the Internet parameters of Xiaomi mobile phone: enter the mobile phone's [Settings] - [Mobile Network] (or dual SIM and mobile network) - select the name of the card you need to access the Internet, open the card slot, click [Access Point Name (APN)] (there are two types of access point names: CMNET and CMWAP) - select the correct access point, if you need to recover, please click the menu key ([ ] Reset to default settings in the lower left corner of the screen], if you need to create a VPN, please click [New APN] (Whether the traffic fee generated by the CMNet access point is included in **, please refer to the actual activation**).

How to set up the access point of Xiaomi mobile phone:

1. Enter the mobile phone menu, open "Settings", select "Mobile Network", click "Data Traffic Enabled", and select "Access Point Name";

2. Click the menu button in the lower left corner of the phone and select "Reset to default settings";

3. Select CMNET or CMWAP from the list of generated access points.

System settings, systems, carriers, access points.

Operating device: Xiaomi Mi 8

Equipment system: MIU11

1. Take Xiaomi Mi 8 as an example, click on the mobile phone to set it to enter the Sen, as shown in the figure below

2. Click "Dual SIM and Mobile Network", as shown in the figure below

3. Click "Access Point (APN)", as shown in the figure below

4. Click "Add Access Point", as shown in the following figure:

5. Add an access point on this interface, set the APN name and type, and click Finish, as shown in the following figure

See if the SIM card's card slot is installed correctly. The SIM card of Xiaomi mobile phone is on one side of the memory card, find the position of the card, and when inserting the card, you have to hear a teasing sound, which means that the card is installed correctly.

Check if your phone has seen airplane mode. There is no signal in normal flight mode.

See if it's on wifi and not on the data function. Generally, turning on WLAN mode is to search for wireless network mode, and unless there is a public network under such mode, if there is no network, you can't access the network.

Ask 10086 to see if your mobile phone has opened the GPRS function service, if not, you need to go to the business hall or call 10086 to open the manual service, otherwise you will not be able to access the Internet. If you open the traffic service, remember to open **, otherwise the monthly fee will be very high.

The last case is the system setting problem of Xiaomi mobile phone, you can also call 10086 for consultation and understanding, and then the staff will send you a system setting apn parameter requirements for Xiaomi mobile phone, set it according to the SMS requirements, and then restart it crucially.

end precautions.

You can't blindly flash the machine;

Don't take your phone apart and check it yourself.